Total size of the Flash device.
For a removable device, the size will be zero if
the device has been removed.
If the total size of the flash device is greater than the
maximum value reportable by this object then this object
should report its maximum value(4,294,967,295) and
ciscoFlashDeviceSizeExtended must be used to report the
flash device's size.
Parsed from file CISCO-FLASH-MIB.mib
Module: CISCO-FLASH-MIB
Total size of the Flash device.
For a removable device, the size will be zero if
the device has been removed.
If the total size of the flash device is greater than the
maximum value reportable by this object then this object
should report its maximum value(4,294,967,295) and
ciscoFlashDeviceSizeExtended must be used to report the
flash device's size.
ciscoFlashDeviceSize OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total size of the Flash device.
For a removable device, the size will be zero if
the device has been removed.
"
View at oid-info.com
Total size of the Flash device.
For a removable device, the size will be zero if
the device has been removed.
Parsed from file cisco-flash.mib.txt
Company: None
Module: CISCO-FLASH-MIB
Total size of the Flash device.
For a removable device, the size will be zero if
the device has been removed.
If the total size of the flash device is greater than the
maximum value reportable by this object then this object
should report its maximum value(4,294,967,295) and
ciscoFlashDeviceSizeExtended must be used to report the
flash device's size.
ciscoFlashDeviceSize OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. If the total size of the flash device is greater than the maximum value reportable by this object then this object should report its maximum value(4,294,967,295) and ciscoFlashDeviceSizeExtended must be used to report the flash device's size." ::= { ciscoFlashDeviceEntry 2 }
ciscoFlashDeviceSize OBJECT-TYPE SYNTAX Gauge(1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. If the total size of the flash device is greater than the maximum value reportable by this object then this object should report its maximum value(4,294,967,295) and ciscoFlashDeviceSizeExtended must be used to report the flash device's size." ::= { ciscoFlashDeviceEntry 2 }
Automatically extracted from Cisco "SNMP v2 MIBs".
ciscoFlashDeviceSize OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. " ::= { ciscoFlashDeviceEntry 2 }
ciscoFlashDeviceSize OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. If the total size of the flash device is greater than the maximum value reportable by this object then this object should report its maximum value(4,294,967,295) and ciscoFlashDeviceSizeExtended must be used to report the flash device's size." ::= { ciscoFlashDeviceEntry 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.10.1.1.2.1.1 | ciscoFlashDeviceIndex | 0 | 0 | Flash device sequence number to index within the table of initialized flash devices. The lowest value should be 1. The highest sh… |
1.3.6.1.4.1.9.9.10.1.1.2.1.3 | ciscoFlashDeviceMinPartitionSize | 0 | 0 | This object will give the minimum partition size supported for this device. For systems that execute code directly out of Flash, … |
1.3.6.1.4.1.9.9.10.1.1.2.1.4 | ciscoFlashDeviceMaxPartitions | 0 | 0 | Max number of partitions supported by the system for this Flash device. Default will be 1, which actually means that partitioning… |
1.3.6.1.4.1.9.9.10.1.1.2.1.5 | ciscoFlashDevicePartitions | 0 | 0 | Flash device partitions actually present. Number of partitions cannot exceed the minimum of ciscoFlashDeviceMaxPartitions and (cisc… |
1.3.6.1.4.1.9.9.10.1.1.2.1.6 | ciscoFlashDeviceChipCount | 0 | 0 | Total number of chips within the Flash device. The purpose of this object is to provide information upfront to a management stati… |
1.3.6.1.4.1.9.9.10.1.1.2.1.7 | ciscoFlashDeviceName | 0 | 0 | Flash device name. This name is used to refer to the device within the system. Flash operations get directed to a device based on… |
1.3.6.1.4.1.9.9.10.1.1.2.1.8 | ciscoFlashDeviceDescr | 0 | 0 | Description of a Flash device. The description is meant to explain what the Flash device and its purpose is. Current values are: S… |
1.3.6.1.4.1.9.9.10.1.1.2.1.9 | ciscoFlashDeviceController | 0 | 0 | Flash device controller. The h/w card that actually controls Flash read/write/erase. Relevant for the AGS+ systems where Flash ma… |
1.3.6.1.4.1.9.9.10.1.1.2.1.10 | ciscoFlashDeviceCard | 0 | 0 | This object will point to an instance of a card entry in the cardTable. The card entry will give details about the card on which … |
1.3.6.1.4.1.9.9.10.1.1.2.1.11 | ciscoFlashDeviceProgrammingJumper | 0 | 0 | This object gives the state of a jumper (if present and can be determined) that controls the programming voltage called Vpp to th… |
1.3.6.1.4.1.9.9.10.1.1.2.1.12 | ciscoFlashDeviceInitTime | 0 | 0 | System time at which device was initialized. For fixed devices, this will be the system time at boot up. For removable devices, it… |
1.3.6.1.4.1.9.9.10.1.1.2.1.13 | ciscoFlashDeviceRemovable | 0 | 0 | Whether Flash device is removable. Generally, only PCMCIA Flash cards will be treated as removable. Socketed Flash chips and Flas… |
1.3.6.1.4.1.9.9.10.1.1.2.1.14 | ciscoFlashPhyEntIndex | 0 | 0 | This object indicates the physical entity index of a physical entity in entPhysicalTable which the flash device actually located. |
1.3.6.1.4.1.9.9.10.1.1.2.1.15 | ciscoFlashDeviceNameExtended | 0 | 0 | Extended Flash device name whose size can be upto 255 characters. This name is used to refer to the device within the system. Fla… |
1.3.6.1.4.1.9.9.10.1.1.2.1.16 | ciscoFlashDeviceSizeExtended | 0 | 0 | Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. This object is a 64-… |
1.3.6.1.4.1.9.9.10.1.1.2.1.17 | ciscoFlashDeviceMinPartitionSizeExtended | 0 | 0 | This object provides the minimum partition size supported for this device. This object is a 64-bit version of ciscoFlashDeviceMin… |