Reference record for OID 1.3.6.1.4.1.9.9.10.1.2.3.1.3



parent
1.3.6.1.4.1.9.9.10.1.2.3.1 (ciscoFlashMiscOpEntry)
node code
3
node name
ciscoFlashMiscOpDestinationName
dot oid
1.3.6.1.4.1.9.9.10.1.2.3.1.3
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFlashMIB(10) ciscoFlashMIBObjects(1) ciscoFlashOps(2) ciscoFlashMiscOpTable(3) ciscoFlashMiscOpEntry(1) ciscoFlashMiscOpDestinationName(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFlashMIB(10) ciscoFlashMIBObjects(1) ciscoFlashOps(2) ciscoFlashMiscOpTable(3) ciscoFlashMiscOpEntry(1) ciscoFlashMiscOpDestinationName(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFlashMIB(10) ciscoFlashMIBObjects(1) ciscoFlashOps(2) ciscoFlashMiscOpTable(3) ciscoFlashMiscOpEntry(1) ciscoFlashMiscOpDestinationName(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFlashMIB(10) ciscoFlashMIBObjects(1) ciscoFlashOps(2) ciscoFlashMiscOpTable(3) ciscoFlashMiscOpEntry(1) ciscoFlashMiscOpDestinationName(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFlashMIB(10) ciscoFlashMIBObjects(1) ciscoFlashOps(2) ciscoFlashMiscOpTable(3) ciscoFlashMiscOpEntry(1) ciscoFlashMiscOpDestinationName(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFlashMIB(10) ciscoFlashMIBObjects(1) ciscoFlashOps(2) ciscoFlashMiscOpTable(3) ciscoFlashMiscOpEntry(1) ciscoFlashMiscOpDestinationName(3)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFlashMIB/ciscoFlashMIBObjects/ciscoFlashOps/ciscoFlashMiscOpTable/ciscoFlashMiscOpEntry/ciscoFlashMiscOpDestinationName
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFlashMIB/ciscoFlashMIBObjects/ciscoFlashOps/ciscoFlashMiscOpTable/ciscoFlashMiscOpEntry/ciscoFlashMiscOpDestinationName
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFlashMIB/ciscoFlashMIBObjects/ciscoFlashOps/ciscoFlashMiscOpTable/ciscoFlashMiscOpEntry/ciscoFlashMiscOpDestinationName
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFlashMIB/ciscoFlashMIBObjects/ciscoFlashOps/ciscoFlashMiscOpTable/ciscoFlashMiscOpEntry/ciscoFlashMiscOpDestinationName
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFlashMIB/ciscoFlashMIBObjects/ciscoFlashOps/ciscoFlashMiscOpTable/ciscoFlashMiscOpEntry/ciscoFlashMiscOpDestinationName
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFlashMIB/ciscoFlashMIBObjects/ciscoFlashOps/ciscoFlashMiscOpTable/ciscoFlashMiscOpEntry/ciscoFlashMiscOpDestinationName
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/10/1/2/3/1/3

    Description by circitor

    Destination file, or partition name.
    File name must be of the form
    [device>:][:]
    where is a value obtained from FlashDeviceName,
    is obtained from FlashPartitionName
    and is the name of a file in Flash.
    While leading and/or trailing whitespaces are acceptable,
    no whitespaces are allowed within the path itself.

    A management station could derive its own partition name
    as per the description for the ciscoFlashPartitionName
    object.
    If is not specified, the default Flash device
    will be assumed.
    If is not specified, the default partition
    will be assumed. If a device is not partitioned into 2
    or more partitions, this value may be left out.

    For an operation on a partition, eg., the erase
    command, this object would specify the partition name
    in the form:
    [device>:][:]

    Parsed from file CISCO-FLASH-MIB.mib
    Module: CISCO-FLASH-MIB

    Description by cisco_v1

    Destination file, or partition name.
    File name must be of the form
    [device>:][:]
    where is a value obtained from FlashDeviceName,
    is obtained from FlashPartitionName
    and is the name of a file in Flash.
    While leading and/or trailing whitespaces are acceptable,
    no whitespaces are allowed within the path itself.

    A management station could derive its own partition name
    as per the description for the ciscoFlashPartitionName
    object.
    If is not specified, the default Flash device
    will be assumed.
    If is not specified, the default partition
    will be assumed. If a device is not partitioned into 2
    or more partitions, this value may be left out.

    For an operation on a partition, eg., the erase
    command, this object would specify the partition name
    in the form:
    [device>:][:]

    Description by oid_info

    ciscoFlashMiscOpDestinationName OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Destination file, or partition name.
    File name must be of the form [<device>:][<partition>:]<file> where <device> is a value obtained from FlashDeviceName, <partition> is obtained from FlashPartitionName and <file> is the name of a file in Flash.
    While leading and/or trailing whitespaces are acceptable, no whitespaces are allowed within the path itself.
    A management station could derive its own partition name as per the description for the ciscoFlashPartitionName object.
    If <device> is not specified, the default Flash device will be assumed.
    If <partition> is not specified, the default partition will be assumed. If a device is not partitioned into 2 or more partitions, this value may be left out.
    For an operation on a partition, eg., the erase command, this object would specify the partition name in the form:
    [<device>:][<partition>:]"
    DEFVAL { \B }
    View at oid-info.com

    Description by mibdepot

    Destination file, or partition name.
    File name must be of the form
    [device>:][:]
    where is a value obtained from FlashDeviceName,
    is obtained from FlashPartitionName
    and is the name of a file in Flash.
    While leading and/or trailing whitespaces are acceptable,
    no whitespaces are allowed within the path itself.

    A management station could derive its own partition name
    as per the description for the ciscoFlashPartitionName
    object.
    If is not specified, the default Flash device
    will be assumed.
    If is not specified, the default partition
    will be assumed. If a device is not partitioned into 2
    or more partitions, this value may be left out.

    For an operation on a partition, eg., the erase
    command, this object would specify the partition name
    in the form:
    [device>:][:]

    Parsed from file cisco-flash.mib.txt
    Company: None
    Module: CISCO-FLASH-MIB

    Description by cisco

    Destination file, or partition name.
    File name must be of the form
    [device>:][:]
    where is a value obtained from FlashDeviceName,
    is obtained from FlashPartitionName
    and is the name of a file in Flash.
    While leading and/or trailing whitespaces are acceptable,
    no whitespaces are allowed within the path itself.

    A management station could derive its own partition name
    as per the description for the ciscoFlashPartitionName
    object.
    If is not specified, the default Flash device
    will be assumed.
    If is not specified, the default partition
    will be assumed. If a device is not partitioned into 2
    or more partitions, this value may be left out.

    For an operation on a partition, eg., the erase
    command, this object would specify the partition name
    in the form:
    [device>:][:]

    Information by circitor

    ciscoFlashMiscOpDestinationName OBJECT-TYPE
    SYNTAX          DisplayString (SIZE  (0..255))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "Destination file, or partition name.
        File name must be of the form
                [device>:][:]
        where  is a value obtained from FlashDeviceName,
               is obtained from FlashPartitionName
          and  is the name of a file in Flash.
        While leading and/or trailing whitespaces are acceptable,
        no whitespaces are allowed within the path itself.

        A management station could derive its own partition name
        as per the description for the ciscoFlashPartitionName
        object.
        If  is not specified, the default Flash device
        will be assumed.
        If  is not specified, the default partition
        will be assumed. If a device is not partitioned into 2
        or more partitions, this value may be left out.

        For an operation on a partition, eg., the erase
        command, this object would specify the partition name
        in the form:
                [device>:][:]"
    DEFVAL          { ''B }
    ::= { ciscoFlashMiscOpEntry 3 }

    Information by cisco_v1

    ciscoFlashMiscOpDestinationName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(0..255))

    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Destination file, or partition name.
        File name must be of the form
                [device>:][:]
        where  is a value obtained from FlashDeviceName,
               is obtained from FlashPartitionName
          and  is the name of a file in Flash.
        While leading and/or trailing whitespaces are acceptable,
        no whitespaces are allowed within the path itself.
        
        A management station could derive its own partition name
        as per the description for the ciscoFlashPartitionName
        object.
        If  is not specified, the default Flash device
        will be assumed.
        If  is not specified, the default partition
        will be assumed. If a device is not partitioned into 2
        or more partitions, this value may be left out.
        
        For an operation on a partition, eg., the erase
        command, this object would specify the partition name
        in the form:
                [device>:][:]"
    DEFVAL { ''B }
    ::= { ciscoFlashMiscOpEntry 3 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    ciscoFlashMiscOpDestinationName OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (0..255))
        MAX-ACCESS      read-create
        STATUS  current
        DESCRIPTION
                "Destination file, or partition name. 
                File name must be of the form 
                        [device>:][:]
                where  is a value obtained from FlashDeviceName,
                       is obtained from FlashPartitionName
                  and  is the name of a file in Flash.
                While leading and/or trailing whitespaces are acceptable,
                no whitespaces are allowed within the path itself.

                A management station could derive its own partition name
                as per the description for the ciscoFlashPartitionName
                object.
                If  is not specified, the default Flash device
                will be assumed.
                If  is not specified, the default partition
                will be assumed. If a device is not partitioned into 2 
                or more partitions, this value may be left out.

                For an operation on a partition, eg., the erase
                command, this object would specify the partition name
                in the form:
                        [device>:][:]
                "
        DEFVAL  { ''B }
        ::= { ciscoFlashMiscOpEntry 3 }

    Information by cisco

    ciscoFlashMiscOpDestinationName OBJECT-TYPE
    SYNTAX          DisplayString (SIZE  (0..255))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "Destination file, or partition name.
        File name must be of the form
                [device>:][:]
        where  is a value obtained from FlashDeviceName,
               is obtained from FlashPartitionName
          and  is the name of a file in Flash.
        While leading and/or trailing whitespaces are acceptable,
        no whitespaces are allowed within the path itself.

        A management station could derive its own partition name
        as per the description for the ciscoFlashPartitionName
        object.
        If  is not specified, the default Flash device
        will be assumed.
        If  is not specified, the default partition
        will be assumed. If a device is not partitioned into 2
        or more partitions, this value may be left out.

        For an operation on a partition, eg., the erase
        command, this object would specify the partition name
        in the form:
                [device>:][:]"
    DEFVAL          { ''B } 
    ::= { ciscoFlashMiscOpEntry 3 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (6)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.10.1.2.3.1.1 ciscoFlashMiscOpSerialNumber 0 0 Object which specifies a unique entry in the
    table. A management station wishing to initiate a
    flash operation should use a pseud…
    1.3.6.1.4.1.9.9.10.1.2.3.1.2 ciscoFlashMiscOpCommand 0 0 The command to be executed. Mandatory.
    Note that it is possible for a system to support
    multiple file systems (different file sys…
    1.3.6.1.4.1.9.9.10.1.2.3.1.4 ciscoFlashMiscOpStatus 0 0 The status of the specified operation.
    miscOpInProgress :
    specified operation is active

    miscOpOperationSuccess :
    specified operatio…
    1.3.6.1.4.1.9.9.10.1.2.3.1.5 ciscoFlashMiscOpNotifyOnCompletion 0 0 Specifies whether or not a notification should be
    generated on the completion of an operation.
    If specified, ciscoFlashMiscOpComp…
    1.3.6.1.4.1.9.9.10.1.2.3.1.6 ciscoFlashMiscOpTime 0 0 Time taken for the operation. This object will
    be like a stopwatch, starting when the operation
    starts, stopping when the operati…
    1.3.6.1.4.1.9.9.10.1.2.3.1.7 ciscoFlashMiscOpEntryStatus 0 0 The status of this table entry.