Reference record for OID 1.3.6.1.4.1.9.9.10.1.2.3.1.4



parent
1.3.6.1.4.1.9.9.10.1.2.3.1 (ciscoFlashMiscOpEntry)
node code
4
node name
ciscoFlashMiscOpStatus
dot oid
1.3.6.1.4.1.9.9.10.1.2.3.1.4
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFlashMIB(10) ciscoFlashMIBObjects(1) ciscoFlashOps(2) ciscoFlashMiscOpTable(3) ciscoFlashMiscOpEntry(1) ciscoFlashMiscOpStatus(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFlashMIB(10) ciscoFlashMIBObjects(1) ciscoFlashOps(2) ciscoFlashMiscOpTable(3) ciscoFlashMiscOpEntry(1) ciscoFlashMiscOpStatus(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFlashMIB(10) ciscoFlashMIBObjects(1) ciscoFlashOps(2) ciscoFlashMiscOpTable(3) ciscoFlashMiscOpEntry(1) ciscoFlashMiscOpStatus(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFlashMIB(10) ciscoFlashMIBObjects(1) ciscoFlashOps(2) ciscoFlashMiscOpTable(3) ciscoFlashMiscOpEntry(1) ciscoFlashMiscOpStatus(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFlashMIB(10) ciscoFlashMIBObjects(1) ciscoFlashOps(2) ciscoFlashMiscOpTable(3) ciscoFlashMiscOpEntry(1) ciscoFlashMiscOpStatus(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFlashMIB(10) ciscoFlashMIBObjects(1) ciscoFlashOps(2) ciscoFlashMiscOpTable(3) ciscoFlashMiscOpEntry(1) ciscoFlashMiscOpStatus(4)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFlashMIB/ciscoFlashMIBObjects/ciscoFlashOps/ciscoFlashMiscOpTable/ciscoFlashMiscOpEntry/ciscoFlashMiscOpStatus
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFlashMIB/ciscoFlashMIBObjects/ciscoFlashOps/ciscoFlashMiscOpTable/ciscoFlashMiscOpEntry/ciscoFlashMiscOpStatus
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFlashMIB/ciscoFlashMIBObjects/ciscoFlashOps/ciscoFlashMiscOpTable/ciscoFlashMiscOpEntry/ciscoFlashMiscOpStatus
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFlashMIB/ciscoFlashMIBObjects/ciscoFlashOps/ciscoFlashMiscOpTable/ciscoFlashMiscOpEntry/ciscoFlashMiscOpStatus
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFlashMIB/ciscoFlashMIBObjects/ciscoFlashOps/ciscoFlashMiscOpTable/ciscoFlashMiscOpEntry/ciscoFlashMiscOpStatus
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFlashMIB/ciscoFlashMIBObjects/ciscoFlashOps/ciscoFlashMiscOpTable/ciscoFlashMiscOpEntry/ciscoFlashMiscOpStatus
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/10/1/2/3/1/4

    Description by circitor

    The status of the specified operation.
    miscOpInProgress :
    specified operation is active

    miscOpOperationSuccess :
    specified operation is supported and completed
    successfully

    miscOpInvalidOperation :
    command invalid or command-protocol-device
    combination unsupported

    miscOpInvalidDestName :
    invalid target name (file or partition or
    device name) specified

    miscOpDeviceBusy :
    specified device is in use and locked by another
    process

    miscOpDeviceOpenError :
    invalid device name

    miscOpDeviceError :
    device read, write or erase error

    miscOpDeviceNotProgrammable :
    device is read-only but a write or erase
    operation was specified

    miscOpFileOpenError :
    invalid file name; file not found in partition

    miscOpFileDeleteFailure :
    file could not be deleted; delete count exceeded

    miscOpFileUndeleteFailure :
    file could not be undeleted; undelete count
    exceeded

    miscOpFileChecksumError :
    file has a bad checksum

    miscOpNoMemory :
    system running low on memory

    miscOpUnknownFailure :
    failure unknown

    miscOpSqueezeFailure :
    the squeeze operation failed

    miscOpNoSuchFile :
    a valid but nonexistent file name was specified

    miscOpFormatFailure :
    the format operation failed

    Parsed from file CISCO-FLASH-MIB.mib
    Module: CISCO-FLASH-MIB

    Description by cisco_v1

    The status of the specified operation.
    miscOpInProgress :
    specified operation is active

    miscOpOperationSuccess :
    specified operation is supported and completed
    successfully

    miscOpInvalidOperation :
    command invalid or command-protocol-device
    combination unsupported

    miscOpInvalidDestName :
    invalid target name (file or partition or
    device name) specified

    miscOpDeviceBusy :
    specified device is in use and locked by another
    process

    miscOpDeviceOpenError :
    invalid device name

    miscOpDeviceError :
    device read, write or erase error

    miscOpDeviceNotProgrammable :
    device is read-only but a write or erase
    operation was specified

    miscOpFileOpenError :
    invalid file name; file not found in partition

    miscOpFileDeleteFailure :
    file could not be deleted; delete count exceeded

    miscOpFileUndeleteFailure :
    file could not be undeleted; undelete count
    exceeded

    miscOpFileChecksumError :
    file has a bad checksum

    miscOpNoMemory :
    system running low on memory

    miscOpUnknownFailure :
    failure unknown

    miscOpSqueezeFailure :
    the squeeze operation failed

    miscOpNoSuchFile :
    a valid but nonexistent file name was specified

    miscOpFormatFailure :
    the format operation failed

    Description by oid_info

    ciscoFlashMiscOpStatus OBJECT-TYPE
    SYNTAX INTEGER
    {
    miscOpInProgress(1),
    miscOpOperationSuccess (2),
    miscOpInvalidOperation (3),
    miscOpInvalidDestName (4),
    miscOpDeviceBusy (5),
    miscOpDeviceOpenError (6),
    miscOpDeviceError (7),
    miscOpDeviceNotProgrammable (8),
    miscOpFileOpenError (9),
    miscOpFileDeleteFailure(10),
    miscOpFileUndeleteFailure(11),
    miscOpFileChecksumError(12),
    miscOpNoMemory (13),
    miscOpUnknownFailure(14),
    miscOpSqueezeFailure(18),
    miscOpNoSuchFile(19),
    miscOpFormatFailure(20)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The status of the specified operation.
    miscOpInProgress :
    specified operation is active
    miscOpOperationSuccess :
    specified operation is supported and completed
    successfully
    miscOpInvalidOperation :
    command invalid or command-protocol-device
    combination unsupported
    miscOpInvalidDestName :
    invalid target name (file or partition or
    device name) specified
    miscOpDeviceBusy :
    specified device is in use and locked by another
    process
    miscOpDeviceOpenError :
    invalid device name
    miscOpDeviceError :
    device read, write or erase error
    miscOpDeviceNotProgrammable :
    device is read-only but a write or erase
    operation was specified
    miscOpFileOpenError :
    invalid file name; file not found in partition
    miscOpFileDeleteFailure :
    file could not be deleted; delete count exceeded
    miscOpFileUndeleteFailure :
    file could not be undeleted; undelete count
    exceeded
    miscOpFileChecksumError :
    file has a bad checksum
    miscOpNoMemory :
    system running low on memory
    miscOpUnknownFailure :
    failure unknown
    miscOpSqueezeFailure :
    the squeeze operation failed
    miscOpNoSuchFile :
    a valid but nonexistent file name was specified
    miscOpFormatFailure :
    the format operation failed
    "
    View at oid-info.com

    Description by mibdepot

    The status of the specified operation.
    miscOpInProgress :
    specified operation is active

    miscOpOperationSuccess :
    specified operation is supported and completed
    successfully

    miscOpInvalidOperation :
    command invalid or command-protocol-device
    combination unsupported

    miscOpInvalidDestName :
    invalid target name (file or partition or
    device name) specified

    miscOpDeviceBusy :
    specified device is in use and locked by another
    process

    miscOpDeviceOpenError :
    invalid device name

    miscOpDeviceError :
    device read, write or erase error

    miscOpDeviceNotProgrammable :
    device is read-only but a write or erase
    operation was specified

    miscOpFileOpenError :
    invalid file name; file not found in partition

    miscOpFileDeleteFailure :
    file could not be deleted; delete count exceeded

    miscOpFileUndeleteFailure :
    file could not be undeleted; undelete count
    exceeded

    miscOpFileChecksumError :
    file has a bad checksum

    miscOpNoMemory :
    system running low on memory

    miscOpUnknownFailure :
    failure unknown

    miscOpSqueezeFailure :
    the squeeze operation failed

    miscOpNoSuchFile :
    a valid but nonexistent file name was specified

    miscOpFormatFailure :
    the format operation failed

    Parsed from file cisco-flash.mib.txt
    Company: None
    Module: CISCO-FLASH-MIB

    Description by cisco

    The status of the specified operation.
    miscOpInProgress :
    specified operation is active

    miscOpOperationSuccess :
    specified operation is supported and completed
    successfully

    miscOpInvalidOperation :
    command invalid or command-protocol-device
    combination unsupported

    miscOpInvalidDestName :
    invalid target name (file or partition or
    device name) specified

    miscOpDeviceBusy :
    specified device is in use and locked by another
    process

    miscOpDeviceOpenError :
    invalid device name

    miscOpDeviceError :
    device read, write or erase error

    miscOpDeviceNotProgrammable :
    device is read-only but a write or erase
    operation was specified

    miscOpFileOpenError :
    invalid file name; file not found in partition

    miscOpFileDeleteFailure :
    file could not be deleted; delete count exceeded

    miscOpFileUndeleteFailure :
    file could not be undeleted; undelete count
    exceeded

    miscOpFileChecksumError :
    file has a bad checksum

    miscOpNoMemory :
    system running low on memory

    miscOpUnknownFailure :
    failure unknown

    miscOpSqueezeFailure :
    the squeeze operation failed

    miscOpNoSuchFile :
    a valid but nonexistent file name was specified

    miscOpFormatFailure :
    the format operation failed

    Information by circitor

    ciscoFlashMiscOpStatus OBJECT-TYPE
    SYNTAX          INTEGER  {
                        miscOpInProgress(1),
                        miscOpOperationSuccess(2),
                        miscOpInvalidOperation(3),
                        miscOpInvalidDestName(4),
                        miscOpDeviceBusy(5),
                        miscOpDeviceOpenError(6),
                        miscOpDeviceError(7),
                        miscOpDeviceNotProgrammable(8),
                        miscOpFileOpenError(9),
                        miscOpFileDeleteFailure(10),
                        miscOpFileUndeleteFailure(11),
                        miscOpFileChecksumError(12),
                        miscOpNoMemory(13),
                        miscOpUnknownFailure(14),
                        miscOpSqueezeFailure(18),
                        miscOpNoSuchFile(19),
                        miscOpFormatFailure(20)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The status of the specified operation.
        miscOpInProgress :
                specified operation is active

        miscOpOperationSuccess :
                specified operation is supported and completed
                successfully

        miscOpInvalidOperation :
                command invalid or command-protocol-device
                combination unsupported

        miscOpInvalidDestName :
                invalid target name (file or partition or
                device name) specified

        miscOpDeviceBusy :
                specified device is in use and locked by another
                process

        miscOpDeviceOpenError :
                invalid device name

        miscOpDeviceError :
                device read, write or erase error

        miscOpDeviceNotProgrammable :
                device is read-only but a write or erase
                operation was specified

        miscOpFileOpenError :
                invalid file name; file not found in partition

        miscOpFileDeleteFailure :
                file could not be deleted; delete count exceeded

        miscOpFileUndeleteFailure :
                file could not be undeleted; undelete count
                exceeded

        miscOpFileChecksumError :
                file has a bad checksum

        miscOpNoMemory :
                system running low on memory

        miscOpUnknownFailure :
                failure unknown

        miscOpSqueezeFailure :
                the squeeze operation failed

        miscOpNoSuchFile :
                a valid but nonexistent file name was specified

        miscOpFormatFailure :
                the format operation failed"
    ::= { ciscoFlashMiscOpEntry 4 }

    Information by cisco_v1

    ciscoFlashMiscOpStatus OBJECT-TYPE
    SYNTAX INTEGER {
        miscOpInProgress(1),
        miscOpOperationSuccess(2),
        miscOpInvalidOperation(3),
        miscOpInvalidDestName(4),
        miscOpDeviceBusy(5),
        miscOpDeviceOpenError(6),
        miscOpDeviceError(7),
        miscOpDeviceNotProgrammable(8),
        miscOpFileOpenError(9),
        miscOpFileDeleteFailure(10),
        miscOpFileUndeleteFailure(11),
        miscOpFileChecksumError(12),
        miscOpNoMemory(13),
        miscOpUnknownFailure(14),
        miscOpSqueezeFailure(18),
        miscOpNoSuchFile(19),
        miscOpFormatFailure(20)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The status of the specified operation.
        miscOpInProgress :
                specified operation is active
        
        miscOpOperationSuccess :
                specified operation is supported and completed
                successfully
        
        miscOpInvalidOperation :
                command invalid or command-protocol-device
                combination unsupported
        
        miscOpInvalidDestName :
                invalid target name (file or partition or
                device name) specified
        
        miscOpDeviceBusy :
                specified device is in use and locked by another
                process
        
        miscOpDeviceOpenError :
                invalid device name
        
        miscOpDeviceError :
                device read, write or erase error
        
        miscOpDeviceNotProgrammable :
                device is read-only but a write or erase
                operation was specified
        
        miscOpFileOpenError :
                invalid file name; file not found in partition
        
        miscOpFileDeleteFailure :
                file could not be deleted; delete count exceeded
        
        miscOpFileUndeleteFailure :
                file could not be undeleted; undelete count
                exceeded
        
        miscOpFileChecksumError :
                file has a bad checksum
        
        miscOpNoMemory :
                system running low on memory
        
        miscOpUnknownFailure :
                failure unknown
        
        miscOpSqueezeFailure :
                the squeeze operation failed
        
        miscOpNoSuchFile :
                a valid but nonexistent file name was specified
        
        miscOpFormatFailure :
                the format operation failed"
    ::= { ciscoFlashMiscOpEntry 4 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    ciscoFlashMiscOpStatus OBJECT-TYPE
        SYNTAX  INTEGER
                {  
                miscOpInProgress(1),
                miscOpOperationSuccess (2),
                miscOpInvalidOperation (3),
                miscOpInvalidDestName (4),
                miscOpDeviceBusy (5),
                miscOpDeviceOpenError (6),
                miscOpDeviceError (7),
                miscOpDeviceNotProgrammable (8),
                miscOpFileOpenError (9),
                miscOpFileDeleteFailure(10),
                miscOpFileUndeleteFailure(11),
                miscOpFileChecksumError(12),
                miscOpNoMemory (13),
                miscOpUnknownFailure(14),
                miscOpSqueezeFailure(18),
                miscOpNoSuchFile(19),
                miscOpFormatFailure(20)
                }
        MAX-ACCESS      read-only
        STATUS  current
        DESCRIPTION
                "The status of the specified operation.
                miscOpInProgress :
                        specified operation is active

                miscOpOperationSuccess :
                        specified operation is supported and completed 
                        successfully

                miscOpInvalidOperation :
                        command invalid or command-protocol-device 
                        combination unsupported

                miscOpInvalidDestName :
                        invalid target name (file or partition or 
                        device name) specified

                miscOpDeviceBusy :
                        specified device is in use and locked by another 
                        process

                miscOpDeviceOpenError :
                        invalid device name

                miscOpDeviceError :
                        device read, write or erase error

                miscOpDeviceNotProgrammable :
                        device is read-only but a write or erase 
                        operation was specified

                miscOpFileOpenError :
                        invalid file name; file not found in partition

                miscOpFileDeleteFailure :
                        file could not be deleted; delete count exceeded

                miscOpFileUndeleteFailure :
                        file could not be undeleted; undelete count 
                        exceeded

                miscOpFileChecksumError :
                        file has a bad checksum

                miscOpNoMemory :
                        system running low on memory

                miscOpUnknownFailure :
                        failure unknown

                miscOpSqueezeFailure :
                        the squeeze operation failed

                miscOpNoSuchFile :
                        a valid but nonexistent file name was specified

                miscOpFormatFailure :
                        the format operation failed
                "
        ::= { ciscoFlashMiscOpEntry 4 }

    Information by cisco

    ciscoFlashMiscOpStatus OBJECT-TYPE
    SYNTAX          INTEGER  {
                        miscOpInProgress(1),
                        miscOpOperationSuccess(2),
                        miscOpInvalidOperation(3),
                        miscOpInvalidDestName(4),
                        miscOpDeviceBusy(5),
                        miscOpDeviceOpenError(6),
                        miscOpDeviceError(7),
                        miscOpDeviceNotProgrammable(8),
                        miscOpFileOpenError(9),
                        miscOpFileDeleteFailure(10),
                        miscOpFileUndeleteFailure(11),
                        miscOpFileChecksumError(12),
                        miscOpNoMemory(13),
                        miscOpUnknownFailure(14),
                        miscOpSqueezeFailure(18),
                        miscOpNoSuchFile(19),
                        miscOpFormatFailure(20)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The status of the specified operation.
        miscOpInProgress :
                specified operation is active

        miscOpOperationSuccess :
                specified operation is supported and completed
                successfully

        miscOpInvalidOperation :
                command invalid or command-protocol-device
                combination unsupported

        miscOpInvalidDestName :
                invalid target name (file or partition or
                device name) specified

        miscOpDeviceBusy :
                specified device is in use and locked by another
                process

        miscOpDeviceOpenError :
                invalid device name

        miscOpDeviceError :
                device read, write or erase error

        miscOpDeviceNotProgrammable :
                device is read-only but a write or erase
                operation was specified

        miscOpFileOpenError :
                invalid file name; file not found in partition

        miscOpFileDeleteFailure :
                file could not be deleted; delete count exceeded

        miscOpFileUndeleteFailure :
                file could not be undeleted; undelete count
                exceeded

        miscOpFileChecksumError :
                file has a bad checksum

        miscOpNoMemory :
                system running low on memory

        miscOpUnknownFailure :
                failure unknown

        miscOpSqueezeFailure :
                the squeeze operation failed

        miscOpNoSuchFile :
                a valid but nonexistent file name was specified

        miscOpFormatFailure :
                the format operation failed" 
    ::= { ciscoFlashMiscOpEntry 4 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (6)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.10.1.2.3.1.1 ciscoFlashMiscOpSerialNumber 0 0 Object which specifies a unique entry in the
    table. A management station wishing to initiate a
    flash operation should use a pseud…
    1.3.6.1.4.1.9.9.10.1.2.3.1.2 ciscoFlashMiscOpCommand 0 0 The command to be executed. Mandatory.
    Note that it is possible for a system to support
    multiple file systems (different file sys…
    1.3.6.1.4.1.9.9.10.1.2.3.1.3 ciscoFlashMiscOpDestinationName 0 0 Destination file, or partition name.
    File name must be of the form
    [device>:][:]
    where is a value obtained from FlashDeviceName,
    …
    1.3.6.1.4.1.9.9.10.1.2.3.1.5 ciscoFlashMiscOpNotifyOnCompletion 0 0 Specifies whether or not a notification should be
    generated on the completion of an operation.
    If specified, ciscoFlashMiscOpComp…
    1.3.6.1.4.1.9.9.10.1.2.3.1.6 ciscoFlashMiscOpTime 0 0 Time taken for the operation. This object will
    be like a stopwatch, starting when the operation
    starts, stopping when the operati…
    1.3.6.1.4.1.9.9.10.1.2.3.1.7 ciscoFlashMiscOpEntryStatus 0 0 The status of this table entry.