The call category or type
Parsed from file CISCO-CALL-TRACKER-MIB.mib
Module: CISCO-CALL-TRACKER-MIB
The call category or type
The call category or type
Parsed from file CISCO-CALL-TRACKER-MIB.my.txt
Company: None
Module: CISCO-CALL-TRACKER-MIB
The call category or type
cctActiveCallCategory OBJECT-TYPE SYNTAX CctCallCategory MAX-ACCESS read-only STATUS current DESCRIPTION "The call category or type " ::= { cctActiveEntry 13 }
cctActiveCallCategory OBJECT-TYPE SYNTAX CctCallCategory ACCESS read-only STATUS mandatory DESCRIPTION "The call category or type" ::= { cctActiveEntry 13 }
Vendor: Cisco
Module: CISCO-CALL-TRACKER-MIB
[Automatically extracted from oidview.com]
cctActiveCallCategory OBJECT-TYPE SYNTAX CctCallCategory MAX-ACCESS read-only STATUS current DESCRIPTION "The call category or type " ::= { cctActiveEntry 13 }
cctActiveCallCategory OBJECT-TYPE SYNTAX CctCallCategory MAX-ACCESS read-only STATUS current DESCRIPTION "The call category or type " ::= { cctActiveEntry 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.163.1.2.3.1.1 | cctActiveCallId | 0 | 0 | Represents a Call Identifier. The call identifier is a monotonically increasing unsigned integer which uniquely identifies the ca… |
1.3.6.1.4.1.9.9.163.1.2.3.1.2 | cctActiveSetupTime | 0 | 0 | Value of sysUpTime when the call is first made known to the system. |
1.3.6.1.4.1.9.9.163.1.2.3.1.3 | cctActiveOrigin | 0 | 0 | This object indicates how the call was created. originate(1) - The call was initiated locally with the system sending the setup r… |
1.3.6.1.4.1.9.9.163.1.2.3.1.4 | cctActiveConnectionTime | 0 | 0 | Value of sysUpTime when the system connected the call. |
1.3.6.1.4.1.9.9.163.1.2.3.1.5 | cctActivePhysicalLayerReadyTime | 0 | 0 | Value of sysUpTime when the physical layer for the call achieved a steady state and the call is ready for higher protocol layers … |
1.3.6.1.4.1.9.9.163.1.2.3.1.6 | cctActiveServiceUpTime | 0 | 0 | Value of sysUpTime when the call service type identified in cctActiveServiceType was established. |
1.3.6.1.4.1.9.9.163.1.2.3.1.7 | cctActiveServiceType | 0 | 0 | Service associated with the call. This is the highest level of service known to the system for the call. The service represents t… |
1.3.6.1.4.1.9.9.163.1.2.3.1.8 | cctActiveUserValidationTime | 0 | 0 | Value of sysUpTime when the user identification associated with this call was validated. See cctActiveUserId for description of u… |
1.3.6.1.4.1.9.9.163.1.2.3.1.9 | cctActiveUserId | 0 | 0 | The User login ID or zero length string if unavailable. |
1.3.6.1.4.1.9.9.163.1.2.3.1.10 | cctActiveUserIpAddr | 0 | 0 | The IP address assigned to the cctActiveUserId for this call or 0.0.0.0 if not applicable or unavailable. |
1.3.6.1.4.1.9.9.163.1.2.3.1.11 | cctActiveUserSubnetMask | 0 | 0 | The IP subnet mask assigned to the cctActiveUserId for this call or 0.0.0.0 if not applicable or unavailable. |
1.3.6.1.4.1.9.9.163.1.2.3.1.12 | cctActiveAccountingSessionId | 0 | 0 | Accounting session identification assigned to this call by AAA. The session ID is sent by AAA to RADIUS as the Acct-Session-Id att… |
1.3.6.1.4.1.9.9.163.1.2.3.1.14 | cctActiveInitialRxRate | 0 | 0 | Initial receive data rate for this call. If call is a synchronous digital call such as ISDN sync, this value is the data rate of … |
1.3.6.1.4.1.9.9.163.1.2.3.1.15 | cctActiveInitialTxRate | 0 | 0 | Initial transmit data rate for this call. If call is a synchronous digital call such as ISDN sync, this value is the data rate of… |
1.3.6.1.4.1.9.9.163.1.2.3.1.16 | cctActiveResourceSlot | 0 | 0 | Identification of the processing resource allocated to the call. In the case of a call requiring a modem resource, this is the val… |
1.3.6.1.4.1.9.9.163.1.2.3.1.17 | cctActiveResourcePort | 0 | 0 | Identification of the processing resource allocated to the call. In the case of a call requiring a modem resource, this is the val… |
1.3.6.1.4.1.9.9.163.1.2.3.1.18 | cctActiveEntrySlot | 0 | 0 | The device slot containing the port on which the call exists. |
1.3.6.1.4.1.9.9.163.1.2.3.1.19 | cctActiveEntryPort | 0 | 0 | The physical port within the device slot on which the call exists. |
1.3.6.1.4.1.9.9.163.1.2.3.1.20 | cctActiveEntryDs1 | 0 | 0 | The DS1 link containing the call. This may be a DS1 contained within a larger grouping of multiple DS1s within a single physical … |
1.3.6.1.4.1.9.9.163.1.2.3.1.21 | cctActiveEntryChannel | 0 | 0 | The channel or timeslot within the cctActiveEntryDs1 allocated to the call. |
1.3.6.1.4.1.9.9.163.1.2.3.1.22 | cctActiveCalledPartyId | 0 | 0 | The called telephone number for this call. For calls answered by the system, this corresponds to the Dialed Number Identification… |
1.3.6.1.4.1.9.9.163.1.2.3.1.23 | cctActiveCallingPartyId | 0 | 0 | The calling telephone number for this call. For calls answered by the system, this corresponds to the calling identification (CLI… |
1.3.6.1.4.1.9.9.163.1.2.3.1.24 | cctActiveMpBundleId | 0 | 0 | Multilink PPP bundle identification for call if cctActiveServiceType has the value 'mp'. If the value of cctActiveServiceType for… |
1.3.6.1.4.1.9.9.163.1.2.3.1.25 | cctActiveChargedUnits | 0 | 0 | The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the… |
1.3.6.1.4.1.9.9.163.1.2.3.1.26 | cctActiveReceiveBytes | 0 | 0 | The number of bytes received on the call. All the 'raw' bytes are counted including any protocol headers which may or may not be… |
1.3.6.1.4.1.9.9.163.1.2.3.1.27 | cctActiveTransmitBytes | 0 | 0 | The number of bytes transmitted on the call. All the 'raw' bytes are counted including any protocol headers which may or may not… |
1.3.6.1.4.1.9.9.163.1.2.3.1.28 | cctActiveCallSignalingType | 0 | 0 | Signaling type used to setup the call. |