Service associated with the call.
This is the highest level of service known to the system
for the call. The service represents the encapsulation
protocol layer active for the call.
In the case of multiple services on a given call, the last
service activated will be reported.
Parsed from file CISCO-CALL-TRACKER-MIB.mib
Module: CISCO-CALL-TRACKER-MIB
Service associated with the call.
This is the highest level of service known to the system
for the call. The service represents the encapsulation
protocol layer active for the call.
In the case of multiple services on a given call, the last
service activated will be reported.
Service associated with the call.
This is the highest level of service known to the system
for the call. The service represents the encapsulation
protocol layer active for the call.
In the case of multiple services on a given call, the last
service activated will be reported.
Parsed from file CISCO-CALL-TRACKER-MIB.my.txt
Company: None
Module: CISCO-CALL-TRACKER-MIB
Service associated with the call.
This is the highest level of service known to the system
for the call. The service represents the encapsulation
protocol layer active for the call.
In the case of multiple services on a given call, the last
service activated will be reported.
cctActiveServiceType OBJECT-TYPE SYNTAX CctServiceType MAX-ACCESS read-only STATUS current DESCRIPTION "Service associated with the call. This is the highest level of service known to the system for the call. The service represents the encapsulation protocol layer active for the call. In the case of multiple services on a given call, the last service activated will be reported. " ::= { cctActiveEntry 7 }
cctActiveServiceType OBJECT-TYPE SYNTAX CctServiceType ACCESS read-only STATUS mandatory DESCRIPTION "Service associated with the call. This is the highest level of service known to the system for the call. The service represents the encapsulation protocol layer active for the call. In the case of multiple services on a given call, the last service activated will be reported." ::= { cctActiveEntry 7 }
Vendor: Cisco
Module: CISCO-CALL-TRACKER-MIB
[Automatically extracted from oidview.com]
cctActiveServiceType OBJECT-TYPE SYNTAX CctServiceType MAX-ACCESS read-only STATUS current DESCRIPTION "Service associated with the call. This is the highest level of service known to the system for the call. The service represents the encapsulation protocol layer active for the call. In the case of multiple services on a given call, the last service activated will be reported. " ::= { cctActiveEntry 7 }
cctActiveServiceType OBJECT-TYPE SYNTAX CctServiceType MAX-ACCESS read-only STATUS current DESCRIPTION "Service associated with the call. This is the highest level of service known to the system for the call. The service represents the encapsulation protocol layer active for the call. In the case of multiple services on a given call, the last service activated will be reported. " ::= { cctActiveEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.163.1.2.3.1.1 | cctActiveCallId | 0 | 0 | Represents a Call Identifier. The call identifier is a monotonically increasing unsigned integer which uniquely identifies the ca… |
1.3.6.1.4.1.9.9.163.1.2.3.1.2 | cctActiveSetupTime | 0 | 0 | Value of sysUpTime when the call is first made known to the system. |
1.3.6.1.4.1.9.9.163.1.2.3.1.3 | cctActiveOrigin | 0 | 0 | This object indicates how the call was created. originate(1) - The call was initiated locally with the system sending the setup r… |
1.3.6.1.4.1.9.9.163.1.2.3.1.4 | cctActiveConnectionTime | 0 | 0 | Value of sysUpTime when the system connected the call. |
1.3.6.1.4.1.9.9.163.1.2.3.1.5 | cctActivePhysicalLayerReadyTime | 0 | 0 | Value of sysUpTime when the physical layer for the call achieved a steady state and the call is ready for higher protocol layers … |
1.3.6.1.4.1.9.9.163.1.2.3.1.6 | cctActiveServiceUpTime | 0 | 0 | Value of sysUpTime when the call service type identified in cctActiveServiceType was established. |
1.3.6.1.4.1.9.9.163.1.2.3.1.8 | cctActiveUserValidationTime | 0 | 0 | Value of sysUpTime when the user identification associated with this call was validated. See cctActiveUserId for description of u… |
1.3.6.1.4.1.9.9.163.1.2.3.1.9 | cctActiveUserId | 0 | 0 | The User login ID or zero length string if unavailable. |
1.3.6.1.4.1.9.9.163.1.2.3.1.10 | cctActiveUserIpAddr | 0 | 0 | The IP address assigned to the cctActiveUserId for this call or 0.0.0.0 if not applicable or unavailable. |
1.3.6.1.4.1.9.9.163.1.2.3.1.11 | cctActiveUserSubnetMask | 0 | 0 | The IP subnet mask assigned to the cctActiveUserId for this call or 0.0.0.0 if not applicable or unavailable. |
1.3.6.1.4.1.9.9.163.1.2.3.1.12 | cctActiveAccountingSessionId | 0 | 0 | Accounting session identification assigned to this call by AAA. The session ID is sent by AAA to RADIUS as the Acct-Session-Id att… |
1.3.6.1.4.1.9.9.163.1.2.3.1.13 | cctActiveCallCategory | 0 | 0 | The call category or type |
1.3.6.1.4.1.9.9.163.1.2.3.1.14 | cctActiveInitialRxRate | 0 | 0 | Initial receive data rate for this call. If call is a synchronous digital call such as ISDN sync, this value is the data rate of … |
1.3.6.1.4.1.9.9.163.1.2.3.1.15 | cctActiveInitialTxRate | 0 | 0 | Initial transmit data rate for this call. If call is a synchronous digital call such as ISDN sync, this value is the data rate of… |
1.3.6.1.4.1.9.9.163.1.2.3.1.16 | cctActiveResourceSlot | 0 | 0 | Identification of the processing resource allocated to the call. In the case of a call requiring a modem resource, this is the val… |
1.3.6.1.4.1.9.9.163.1.2.3.1.17 | cctActiveResourcePort | 0 | 0 | Identification of the processing resource allocated to the call. In the case of a call requiring a modem resource, this is the val… |
1.3.6.1.4.1.9.9.163.1.2.3.1.18 | cctActiveEntrySlot | 0 | 0 | The device slot containing the port on which the call exists. |
1.3.6.1.4.1.9.9.163.1.2.3.1.19 | cctActiveEntryPort | 0 | 0 | The physical port within the device slot on which the call exists. |
1.3.6.1.4.1.9.9.163.1.2.3.1.20 | cctActiveEntryDs1 | 0 | 0 | The DS1 link containing the call. This may be a DS1 contained within a larger grouping of multiple DS1s within a single physical … |
1.3.6.1.4.1.9.9.163.1.2.3.1.21 | cctActiveEntryChannel | 0 | 0 | The channel or timeslot within the cctActiveEntryDs1 allocated to the call. |
1.3.6.1.4.1.9.9.163.1.2.3.1.22 | cctActiveCalledPartyId | 0 | 0 | The called telephone number for this call. For calls answered by the system, this corresponds to the Dialed Number Identification… |
1.3.6.1.4.1.9.9.163.1.2.3.1.23 | cctActiveCallingPartyId | 0 | 0 | The calling telephone number for this call. For calls answered by the system, this corresponds to the calling identification (CLI… |
1.3.6.1.4.1.9.9.163.1.2.3.1.24 | cctActiveMpBundleId | 0 | 0 | Multilink PPP bundle identification for call if cctActiveServiceType has the value 'mp'. If the value of cctActiveServiceType for… |
1.3.6.1.4.1.9.9.163.1.2.3.1.25 | cctActiveChargedUnits | 0 | 0 | The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the… |
1.3.6.1.4.1.9.9.163.1.2.3.1.26 | cctActiveReceiveBytes | 0 | 0 | The number of bytes received on the call. All the 'raw' bytes are counted including any protocol headers which may or may not be… |
1.3.6.1.4.1.9.9.163.1.2.3.1.27 | cctActiveTransmitBytes | 0 | 0 | The number of bytes transmitted on the call. All the 'raw' bytes are counted including any protocol headers which may or may not… |
1.3.6.1.4.1.9.9.163.1.2.3.1.28 | cctActiveCallSignalingType | 0 | 0 | Signaling type used to setup the call. |