This object is used to enable accounting when the
APN is in 'transparent' mode. When the object is set to
'true', cgprsAccPtAaaAccountServerGroup is used for
accounting. If cgprsAccPtAaaAccountServerGroup is not
specified, cgprsAccPtAaaAuthServerGroup will be used.
When the APN is in 'non-transparent' mode, the
accounting will always be enabled i.e., this object
will be 'true' by default.
Parsed from file CISCO-GPRS-ACC-PT-MIB.mib
Module: CISCO-GPRS-ACC-PT-MIB
This object is used to enable accounting when the
APN is in 'transparent' mode. When the object is set to
'true', cgprsAccPtAaaAccountServerGroup is used for
accounting. If cgprsAccPtAaaAccountServerGroup is not
specified, cgprsAccPtAaaAuthServerGroup will be used.
When the APN is in 'non-transparent' mode, the
accounting will always be enabled i.e., this object
will be 'true' by default.
This object is used to enable accounting when the
APN is in 'transparent' mode. When the object is set to
'true', cgprsAccPtAaaAccountServerGroup is used for
accounting. If cgprsAccPtAaaAccountServerGroup is not
specified, cgprsAccPtAaaAuthServerGroup will be used.
When the APN is in 'non-transparent' mode, the
accounting will always be enabled i.e., this object
will be 'true' by default.
Parsed from file CISCO-GPRS-ACC-PT-MIB.my.txt
Company: None
Module: CISCO-GPRS-ACC-PT-MIB
This object is used to enable accounting when the
APN is in 'transparent' mode. When the object is set to
'true', cgprsAccPtAaaAccountServerGroup is used for
accounting. If cgprsAccPtAaaAccountServerGroup is not
specified, cgprsAccPtAaaAuthServerGroup will be used.
When the APN is in 'non-transparent' mode, the
accounting will always be enabled i.e., this object
will be 'true' by default.
cgprsAccPtAaaAccountingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable accounting when the APN is in 'transparent' mode. When the object is set to 'true', cgprsAccPtAaaAccountServerGroup is used for accounting. If cgprsAccPtAaaAccountServerGroup is not specified, cgprsAccPtAaaAuthServerGroup will be used. When the APN is in 'non-transparent' mode, the accounting will always be enabled i.e., this object will be 'true' by default." ::= { cgprsAccPtEntry 28 }
cgprsAccPtAaaAccountingEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable accounting when the APN is in 'transparent' mode. When the object is set to 'true', cgprsAccPtAaaAccountServerGroup is used for accounting. If cgprsAccPtAaaAccountServerGroup is not specified, cgprsAccPtAaaAuthServerGroup will be used. When the APN is in 'non-transparent' mode, the accounting will always be enabled i.e., this object will be 'true' by default." ::= { cgprsAccPtEntry 28 }
Vendor: Cisco
Module: CISCO-GPRS-ACC-PT-MIB
[Automatically extracted from oidview.com]
cgprsAccPtAaaAccountingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable accounting when the APN is in 'transparent' mode. When the object is set to 'true', cgprsAccPtAaaAccountServerGroup is used for accounting. If cgprsAccPtAaaAccountServerGroup is not specified, cgprsAccPtAaaAuthServerGroup will be used. When the APN is in 'non-transparent' mode, the accounting will always be enabled i.e., this object will be 'true' by default." ::= { cgprsAccPtEntry 28 }
cgprsAccPtAaaAccountingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable accounting when the APN is in 'transparent' mode. When the object is set to 'true', cgprsAccPtAaaAccountServerGroup is used for accounting. If cgprsAccPtAaaAccountServerGroup is not specified, cgprsAccPtAaaAuthServerGroup will be used. When the APN is in 'non-transparent' mode, the accounting will always be enabled i.e., this object will be 'true' by default." ::= { cgprsAccPtEntry 28 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.183.1.1.1.1.1 | cgprsAccPtIndex | 0 | 0 | A locally unique identifier for this access point on this GGSN. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.2 | cgprsAccPtRowStatus | 0 | 0 | This object is used to create or delete conceptual row in this table. To create a row, set this object to 'createAndGo'. There are… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.3 | cgprsAccPtName | 0 | 0 | The Access Point Name. It is composed of two parts: - The APN Network Identifier is mandatory and is a fully qualified domain nam… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.4 | cgprsAccPtMode | 0 | 0 | Specifies the type of access allowed to the PDN through this access point. - 'transparent', indicates that users can access withou… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.5 | cgprsAccPtIpAddressPool | 0 | 0 | Specifies a dynamic address allocation method for this access point. - 'global', which indicates that no method is defined specifi… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.6 | cgprsAccPtDHCPServerPri | 0 | 0 | This object specifies the IP address of the primary DHCP server from which a mobile subscriber can request an IP address assignme… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.7 | cgprsAccPtDHCPServerSec | 0 | 0 | The IP address of the secondary DHCP server. The secondary DHCP server is used if the primary DHCP server is not available. This … |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.8 | cgprsAccPtDHCPGwAddr | 0 | 0 | This object specifies the DHCP gateway address that is used in the 'giaddr' field of the DHCP request. It is used by DHCP to dete… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.9 | cgprsAccPtRadiusServerPri | 0 | 0 | This object specifies the IP address of the primary RADIUS server used by this access point to authenticate and/or authorize mobi… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.10 | cgprsAccPtRadiusServerSec | 0 | 0 | Specifies a secondary RADIUS server. The secondary RADIUS server will be used if the primary RADIUS server is not available. Obsol… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.11 | cgprsAccPtIPAccListGroupIn | 0 | 0 | This object specifies the ACL against which to compare packets received at this Access Point from the PDN for forwarding towards … |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.12 | cgprsAccPtIPAccListGroupOut | 0 | 0 | This object specifies the ACL against which to compare packets originated by an MS and received by at this Access Point for forwa… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.13 | cgprsAccPtIfIndex | 0 | 0 | Specifies an interface to be used by GGSN on Gi interface. The value zero indicates that no interface is specified. The cgprsAccPtI… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.14 | cgprsAccPtIfNextHop | 0 | 0 | Specifies the IP address of the next hop for the Gi interface, specified by cgprsAccPtIfIndex. This value is mandatory if the val… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.15 | cgprsAccPtAccessViolation | 0 | 0 | Specifies how access violation should be treated. An access violation occurs if the IP packets violates any rules in ACL as speci… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.16 | cgprsAccPtSubrRequired | 0 | 0 | This object indicates if a user needs to subscribe to this access point before accessing it. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.17 | cgprsAccPtNetworkInitiated | 0 | 0 | This object indicates whether network (PDN) initiated PDP sessions are allowed for this access point. The more common case, is fa… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.18 | cgprsAccPtIpAddrAllocations | 0 | 0 | Indicates the number of IP addresses allocated to MS's. Trigger Condition: This gauge is incremented/decremented by successful com… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.19 | cgprsAccPtUsers | 0 | 0 | The number of mobile subscribers currently accessing this APN. Obsoleted by cgprsAccPtActivePdps. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.20 | cgprsAccPtIdlePdpPurgeTimer | 0 | 0 | This object indicates maximum idle connection time allowed to the PDP context before termination of the GTP session. A value of … |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.21 | cgprsAccPtBlockMsRoaming | 0 | 0 | This object indicates whether access to a roaming MS needs to be blocked for this APN. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.22 | cgprsAccPtAnonymousUserName | 0 | 0 | This object specifies the anonymous user name, which is used when a MS tries to access a non-transparent APN without supplying us… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.23 | cgprsAccPtAnonymousUserPassword | 0 | 0 | This object specifies the password corresponding to cgprsAccPtAnonymousUserName. For security reasons, retrieving this object re… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.24 | cgprsAccPtMsIsdnSuppressed | 0 | 0 | This object specifies whether the ISDN ID used by the MS, when authenticating with a radius server, needs to be suppressed or not… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.25 | cgprsAccPtMsIsdnSuppressedValue | 0 | 0 | This object specifies the value that will be transmitted to the radius server in place of mobile stations ISDN ID. This object c… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.26 | cgprsAccPtAaaAuthServerGroup | 0 | 0 | This object specifies the AAA radius server group that is used for authentication by this APN. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.27 | cgprsAccPtAaaAccountServerGroup | 0 | 0 | This object specifies the AAA radius server group that is used for accounting by this APN. If no group is specified for accounti… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.29 | cgprsAccPtType | 0 | 0 | This object specifies the type of APN. 'virtual' - Specifies an APN type that is not associated with any specific physical target… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.30 | cgprsAccPtVrfName | 0 | 0 | This object specifies the name of the VRF with which this APN is associated. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.31 | cgprsAccPtDhcpAddrSpace | 0 | 0 | This object specifies the address space used by the dhcp server. This object can only be set if cgprsAccPtDHCPServerPri is set. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.32 | cgprsAccPtPppRegenEnable | 0 | 0 | This object is used to enable GGSN to regenerate a PPP session for each IP PDP context on this APN. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.33 | cgprsAccPtPppRegenMaxSessions | 0 | 0 | This object specifies the maximum number of regenerated PPP sessions allowed for this access-point. This object can only be set i… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.34 | cgprsAccPtPppRegenSetupTime | 0 | 0 | This object specifies the maximum tolerance time within which a regenerated PPP session has to fully come up. This object can onl… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.35 | cgprsAccPtAutoAggregation | 0 | 0 | This object is used to enable auto aggregation on this APN. When a user tries to configure entries in cgprsAccPtAggregTable, thi… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.36 | cgprsAccPtPcscfServerGroupName | 0 | 0 | This object represents the Proxy-CSCF server group that will be used by this APN. The Proxy-CSCF server group contains a list of… |