This object specifies the type of APN.
'virtual' - Specifies an APN type that is not
associated with any specific physical target network
on the GGSN. When this object is set to 'virtual',
all other APN parameters are ignored.
'real' - Specifies an APN type that corresponds to a
physical interface to an external network on the GGSN.
'virtualPreAuth' - Specifies an APN type that is not
associated with any specific physical target network
on the GGSN. It applies a pre-authentication phase
for any create PDP request that includes a virtual
APN. During pre-authentication, an Access-Request
message is sent to an AAA server and the AAA server
then returns a target APN encoded in a Radius
attribute in the Access-Accept message.
Parsed from file CISCO-GPRS-ACC-PT-MIB.mib
Module: CISCO-GPRS-ACC-PT-MIB
This object specifies the type of APN.
'virtual' - Specifies an APN type that is not
associated with any specific physical target network
on the Gateway. When this object is set to 'virtual',
all other APN parameters are ignored.
'real' - Specifies an APN type that corresponds to a
physical interface to an external network on the Gateway.
'virtualPreAuth' - Specifies an APN type that is not
associated with any specific physical target network
on the Gateway. It applies a pre-authentication phase
for any create PDP or Bearer request that includes a virtual
APN. During pre-authentication, an Access-Request
message is sent to an AAA server and the AAA server
then returns a target APN encoded in a Radius
attribute in the Access-Accept message.
This object specifies the type of APN.
'virtual' - Specifies an APN type that is not
associated with any specific physical target network
on the Gateway. When this object is set to 'virtual',
all other APN parameters are ignored.
'real' - Specifies an APN type that corresponds to a
physical interface to an external network on the Gateway.
'virtualPreAuth' - Specifies an APN type that is not
associated with any specific physical target network
on the Gateway. It applies a pre-authentication phase
for any create PDP or Bearer request that includes a virtual
APN. During pre-authentication, an Access-Request
message is sent to an AAA server and the AAA server
then returns a target APN encoded in a Radius
attribute in the Access-Accept message.
Parsed from file CISCO-GPRS-ACC-PT-MIB.my.txt
Company: None
Module: CISCO-GPRS-ACC-PT-MIB
This object specifies the type of APN.
'virtual' - Specifies an APN type that is not
associated with any specific physical target network
on the Gateway. When this object is set to 'virtual',
all other APN parameters are ignored.
'real' - Specifies an APN type that corresponds to a
physical interface to an external network on the Gateway.
'virtualPreAuth' - Specifies an APN type that is not
associated with any specific physical target network
on the Gateway. It applies a pre-authentication phase
for any create PDP or Bearer request that includes a virtual
APN. During pre-authentication, an Access-Request
message is sent to an AAA server and the AAA server
then returns a target APN encoded in a Radius
attribute in the Access-Accept message.
cgprsAccPtType OBJECT-TYPE SYNTAX INTEGER { real(1), virtual(2), virtualPreAuth(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the type of APN. 'virtual' - Specifies an APN type that is not associated with any specific physical target network on the GGSN. When this object is set to 'virtual', all other APN parameters are ignored. 'real' - Specifies an APN type that corresponds to a physical interface to an external network on the GGSN. 'virtualPreAuth' - Specifies an APN type that is not associated with any specific physical target network on the GGSN. It applies a pre-authentication phase for any create PDP request that includes a virtual APN. During pre-authentication, an Access-Request message is sent to an AAA server and the AAA server then returns a target APN encoded in a Radius attribute in the Access-Accept message." DEFVAL { real } ::= { cgprsAccPtEntry 29 }
cgprsAccPtType OBJECT-TYPE SYNTAX INTEGER { real(1), virtual(2), virtualPreAuth(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the type of APN. 'virtual' - Specifies an APN type that is not associated with any specific physical target network on the Gateway. When this object is set to 'virtual', all other APN parameters are ignored. 'real' - Specifies an APN type that corresponds to a physical interface to an external network on the Gateway. 'virtualPreAuth' - Specifies an APN type that is not associated with any specific physical target network on the Gateway. It applies a pre-authentication phase for any create PDP or Bearer request that includes a virtual APN. During pre-authentication, an Access-Request message is sent to an AAA server and the AAA server then returns a target APN encoded in a Radius attribute in the Access-Accept message." DEFVAL { real } ::= { cgprsAccPtEntry 29 }
Vendor: Cisco
Module: CISCO-GPRS-ACC-PT-MIB
[Automatically extracted from oidview.com]
cgprsAccPtType OBJECT-TYPE SYNTAX INTEGER { real(1), virtual(2), virtualPreAuth(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the type of APN. 'virtual' - Specifies an APN type that is not associated with any specific physical target network on the Gateway. When this object is set to 'virtual', all other APN parameters are ignored. 'real' - Specifies an APN type that corresponds to a physical interface to an external network on the Gateway. 'virtualPreAuth' - Specifies an APN type that is not associated with any specific physical target network on the Gateway. It applies a pre-authentication phase for any create PDP or Bearer request that includes a virtual APN. During pre-authentication, an Access-Request message is sent to an AAA server and the AAA server then returns a target APN encoded in a Radius attribute in the Access-Accept message." DEFVAL { real } ::= { cgprsAccPtEntry 29 }
cgprsAccPtType OBJECT-TYPE SYNTAX INTEGER { real(1), virtual(2), virtualPreAuth(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the type of APN. 'virtual' - Specifies an APN type that is not associated with any specific physical target network on the Gateway. When this object is set to 'virtual', all other APN parameters are ignored. 'real' - Specifies an APN type that corresponds to a physical interface to an external network on the Gateway. 'virtualPreAuth' - Specifies an APN type that is not associated with any specific physical target network on the Gateway. It applies a pre-authentication phase for any create PDP or Bearer request that includes a virtual APN. During pre-authentication, an Access-Request message is sent to an AAA server and the AAA server then returns a target APN encoded in a Radius attribute in the Access-Accept message." DEFVAL { real } ::= { cgprsAccPtEntry 29 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.183.1.1.1.1.1 | cgprsAccPtIndex | 0 | 0 | A locally unique identifier for this access point on this GGSN. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.2 | cgprsAccPtRowStatus | 0 | 0 | This object is used to create or delete conceptual row in this table. To create a row, set this object to 'createAndGo'. There are… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.3 | cgprsAccPtName | 0 | 0 | The Access Point Name. It is composed of two parts: - The APN Network Identifier is mandatory and is a fully qualified domain nam… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.4 | cgprsAccPtMode | 0 | 0 | Specifies the type of access allowed to the PDN through this access point. - 'transparent', indicates that users can access withou… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.5 | cgprsAccPtIpAddressPool | 0 | 0 | Specifies a dynamic address allocation method for this access point. - 'global', which indicates that no method is defined specifi… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.6 | cgprsAccPtDHCPServerPri | 0 | 0 | This object specifies the IP address of the primary DHCP server from which a mobile subscriber can request an IP address assignme… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.7 | cgprsAccPtDHCPServerSec | 0 | 0 | The IP address of the secondary DHCP server. The secondary DHCP server is used if the primary DHCP server is not available. This … |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.8 | cgprsAccPtDHCPGwAddr | 0 | 0 | This object specifies the DHCP gateway address that is used in the 'giaddr' field of the DHCP request. It is used by DHCP to dete… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.9 | cgprsAccPtRadiusServerPri | 0 | 0 | This object specifies the IP address of the primary RADIUS server used by this access point to authenticate and/or authorize mobi… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.10 | cgprsAccPtRadiusServerSec | 0 | 0 | Specifies a secondary RADIUS server. The secondary RADIUS server will be used if the primary RADIUS server is not available. Obsol… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.11 | cgprsAccPtIPAccListGroupIn | 0 | 0 | This object specifies the ACL against which to compare packets received at this Access Point from the PDN for forwarding towards … |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.12 | cgprsAccPtIPAccListGroupOut | 0 | 0 | This object specifies the ACL against which to compare packets originated by an MS and received by at this Access Point for forwa… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.13 | cgprsAccPtIfIndex | 0 | 0 | Specifies an interface to be used by GGSN on Gi interface. The value zero indicates that no interface is specified. The cgprsAccPtI… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.14 | cgprsAccPtIfNextHop | 0 | 0 | Specifies the IP address of the next hop for the Gi interface, specified by cgprsAccPtIfIndex. This value is mandatory if the val… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.15 | cgprsAccPtAccessViolation | 0 | 0 | Specifies how access violation should be treated. An access violation occurs if the IP packets violates any rules in ACL as speci… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.16 | cgprsAccPtSubrRequired | 0 | 0 | This object indicates if a user needs to subscribe to this access point before accessing it. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.17 | cgprsAccPtNetworkInitiated | 0 | 0 | This object indicates whether network (PDN) initiated PDP sessions are allowed for this access point. The more common case, is fa… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.18 | cgprsAccPtIpAddrAllocations | 0 | 0 | Indicates the number of IP addresses allocated to MS's. Trigger Condition: This gauge is incremented/decremented by successful com… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.19 | cgprsAccPtUsers | 0 | 0 | The number of mobile subscribers currently accessing this APN. Obsoleted by cgprsAccPtActivePdps. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.20 | cgprsAccPtIdlePdpPurgeTimer | 0 | 0 | This object indicates maximum idle connection time allowed to the PDP context before termination of the GTP session. A value of … |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.21 | cgprsAccPtBlockMsRoaming | 0 | 0 | This object indicates whether access to a roaming MS needs to be blocked for this APN. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.22 | cgprsAccPtAnonymousUserName | 0 | 0 | This object specifies the anonymous user name, which is used when a MS tries to access a non-transparent APN without supplying us… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.23 | cgprsAccPtAnonymousUserPassword | 0 | 0 | This object specifies the password corresponding to cgprsAccPtAnonymousUserName. For security reasons, retrieving this object re… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.24 | cgprsAccPtMsIsdnSuppressed | 0 | 0 | This object specifies whether the ISDN ID used by the MS, when authenticating with a radius server, needs to be suppressed or not… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.25 | cgprsAccPtMsIsdnSuppressedValue | 0 | 0 | This object specifies the value that will be transmitted to the radius server in place of mobile stations ISDN ID. This object c… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.26 | cgprsAccPtAaaAuthServerGroup | 0 | 0 | This object specifies the AAA radius server group that is used for authentication by this APN. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.27 | cgprsAccPtAaaAccountServerGroup | 0 | 0 | This object specifies the AAA radius server group that is used for accounting by this APN. If no group is specified for accounti… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.28 | cgprsAccPtAaaAccountingEnable | 0 | 0 | This object is used to enable accounting when the APN is in 'transparent' mode. When the object is set to 'true', cgprsAccPtAaaA… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.30 | cgprsAccPtVrfName | 0 | 0 | This object specifies the name of the VRF with which this APN is associated. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.31 | cgprsAccPtDhcpAddrSpace | 0 | 0 | This object specifies the address space used by the dhcp server. This object can only be set if cgprsAccPtDHCPServerPri is set. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.32 | cgprsAccPtPppRegenEnable | 0 | 0 | This object is used to enable GGSN to regenerate a PPP session for each IP PDP context on this APN. |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.33 | cgprsAccPtPppRegenMaxSessions | 0 | 0 | This object specifies the maximum number of regenerated PPP sessions allowed for this access-point. This object can only be set i… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.34 | cgprsAccPtPppRegenSetupTime | 0 | 0 | This object specifies the maximum tolerance time within which a regenerated PPP session has to fully come up. This object can onl… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.35 | cgprsAccPtAutoAggregation | 0 | 0 | This object is used to enable auto aggregation on this APN. When a user tries to configure entries in cgprsAccPtAggregTable, thi… |
| 1.3.6.1.4.1.9.9.183.1.1.1.1.36 | cgprsAccPtPcscfServerGroupName | 0 | 0 | This object represents the Proxy-CSCF server group that will be used by this APN. The Proxy-CSCF server group contains a list of… |