Reference record for OID 1.3.6.1.4.1.9.9.246.1.3.1.1.1

parent

1.3.6.1.4.1.9.9.246.1.3.1.1 (cltcTunneledProtocolEntry)

node code

1

node name

cltcTunneledProtocolType

dot oid

1.3.6.1.4.1.9.9.246.1.3.1.1.1

type

OBJECT-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoL2TunnelConfigMIB(246) cltcMIBObjects(1) cltcTunneledProtocol(3) cltcTunneledProtocolTable(1) cltcTunneledProtocolEntry(1) cltcTunneledProtocolType(1)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoL2TunnelConfigMIB(246) cltcMIBObjects(1) cltcTunneledProtocol(3) cltcTunneledProtocolTable(1) cltcTunneledProtocolEntry(1) cltcTunneledProtocolType(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoL2TunnelConfigMIB(246) cltcMIBObjects(1) cltcTunneledProtocol(3) cltcTunneledProtocolTable(1) cltcTunneledProtocolEntry(1) cltcTunneledProtocolType(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoL2TunnelConfigMIB(246) cltcMIBObjects(1) cltcTunneledProtocol(3) cltcTunneledProtocolTable(1) cltcTunneledProtocolEntry(1) cltcTunneledProtocolType(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoL2TunnelConfigMIB(246) cltcMIBObjects(1) cltcTunneledProtocol(3) cltcTunneledProtocolTable(1) cltcTunneledProtocolEntry(1) cltcTunneledProtocolType(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoL2TunnelConfigMIB(246) cltcMIBObjects(1) cltcTunneledProtocol(3) cltcTunneledProtocolTable(1) cltcTunneledProtocolEntry(1) cltcTunneledProtocolType(1)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoL2TunnelConfigMIB/cltcMIBObjects/cltcTunneledProtocol/cltcTunneledProtocolTable/cltcTunneledProtocolEntry/cltcTunneledProtocolType

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoL2TunnelConfigMIB/cltcMIBObjects/cltcTunneledProtocol/cltcTunneledProtocolTable/cltcTunneledProtocolEntry/cltcTunneledProtocolType

/iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoL2TunnelConfigMIB/cltcMIBObjects/cltcTunneledProtocol/cltcTunneledProtocolTable/cltcTunneledProtocolEntry/cltcTunneledProtocolType

/iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoL2TunnelConfigMIB/cltcMIBObjects/cltcTunneledProtocol/cltcTunneledProtocolTable/cltcTunneledProtocolEntry/cltcTunneledProtocolType

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoL2TunnelConfigMIB/cltcMIBObjects/cltcTunneledProtocol/cltcTunneledProtocolTable/cltcTunneledProtocolEntry/cltcTunneledProtocolType

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoL2TunnelConfigMIB/cltcMIBObjects/cltcTunneledProtocol/cltcTunneledProtocolTable/cltcTunneledProtocolEntry/cltcTunneledProtocolType

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/9/9/246/1/3/1/1/1

Description by circitor

Indicates tunneled protocol of the interface.

If a BIT is set, then the value of the corresponding
protocol is tunneled. Specifically, if the 'cdp(0)'
BIT is set, then the Cisco Discovery Protocol PDU is
tunneled; if the 'vtp(1)' BIT is set, then the VLAN
Trunking Protocol PDU is tunneled; if the 'stp(2)' BIT
is set, then the Spanning Tree Protocol PDU is tunneled;
if the 'eoam(3)' BIT is set, then the ethernet Operation,
Administration and Maintenance PDU is tunneled; if the
'lldp(4)' BIT is set, then the Link Layer Discovery
Protocol is tunneled.

If the bit for a given protocol is set for an interface, then
the statistics for that interface and protocol will start to be
monitored.

Parsed from file CISCO-L2-TUNNEL-CONFIG-MIB.mib
Module: CISCO-L2-TUNNEL-CONFIG-MIB

Description by cisco_v1

Indicates tunneled protocol of the interface.

If a BIT is set, then the value of the corresponding
protocol is tunneled. Specifically, if the 'cdp(0)'
BIT is set, then the Cisco Discovery Protocol PDU is
tunneled; if the 'vtp(1)' BIT is set, then the VLAN
Trunking Protocol PDU is tunneled; if the 'stp(2)' BIT
is set, then the Spanning Tree Protocol PDU is tunneled;
if the 'eoam(3)' BIT is set, then the ethernet Operation,
Administration and Maintenance PDU is tunneled; if the
'lldp(4)' BIT is set, then the Link Layer Discovery
Protocol is tunneled.

If the bit for a given protocol is set for an interface, then
the statistics for that interface and protocol will start to be
monitored.

Description by mibdepot

Indicates tunneled protocol of the interface.

If a BIT is set, then the value of the corresponding
protocol is tunneled. Specifically, if the 'cdp(0)'
BIT is set, then the Cisco Discovery Protocol PDU is
tunneled; if the 'vtp(1)' BIT is set, then the VLAN
Trunking Protocol PDU is tunneled; if the 'stp(2)' BIT
is set, then the Spanning Tree Protocol PDU is tunneled;
if the 'eoam(3)' BIT is set, then the ethernet Operation,
Administration and Maintenance PDU is tunneled; if the
'lldp(4)' BIT is set, then the Link Layer Discovery
Protocol is tunneled.

If the bit for a given protocol is set for an interface, then
the statistics for that interface and protocol will start to be
monitored.

Parsed from file CISCO-L2-TUNNEL-CONFIG-MIB.my.txt
Company: None
Module: CISCO-L2-TUNNEL-CONFIG-MIB

Description by cisco

Indicates tunneled protocol of the interface.

If a BIT is set, then the value of the corresponding
protocol is tunneled. Specifically, if the 'cdp(0)'
BIT is set, then the Cisco Discovery Protocol PDU is
tunneled; if the 'vtp(1)' BIT is set, then the VLAN
Trunking Protocol PDU is tunneled; if the 'stp(2)' BIT
is set, then the Spanning Tree Protocol PDU is tunneled;
if the 'eoam(3)' BIT is set, then the ethernet Operation,
Administration and Maintenance PDU is tunneled; if the
'lldp(4)' BIT is set, then the Link Layer Discovery
Protocol is tunneled.

If the bit for a given protocol is set for an interface, then
the statistics for that interface and protocol will start to be
monitored.

Information by circitor

cltcTunneledProtocolType OBJECT-TYPE
    SYNTAX          BITS {
                        cdp(0),
                        vtp(1),
                        stp(2),
                        eoam(3),
                        lldp(4)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Indicates tunneled protocol of the interface.

        If a BIT is set, then the value of the corresponding
        protocol is tunneled. Specifically, if the 'cdp(0)'
        BIT is set, then the Cisco Discovery Protocol PDU is
        tunneled; if the 'vtp(1)' BIT is set, then the VLAN
        Trunking Protocol PDU is tunneled; if the 'stp(2)' BIT
        is set, then the Spanning Tree Protocol PDU is tunneled;
        if the 'eoam(3)' BIT is set, then the ethernet Operation,
        Administration and Maintenance PDU is tunneled; if the
        'lldp(4)' BIT is set, then the Link Layer Discovery
        Protocol is tunneled.

        If the bit for a given protocol is set for an interface, then
        the statistics for that interface and protocol will start to be
        monitored." 
    ::= { cltcTunneledProtocolEntry 1 }

Information by cisco_v1

cltcTunneledProtocolType OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(1..2))
        
        
        
        
        
        
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates tunneled protocol of the interface.
        
        If a BIT is set, then the value of the corresponding
        protocol is tunneled. Specifically, if the 'cdp(0)'
        BIT is set, then the Cisco Discovery Protocol PDU is
        tunneled; if the 'vtp(1)' BIT is set, then the VLAN
        Trunking Protocol PDU is tunneled; if the 'stp(2)' BIT
        is set, then the Spanning Tree Protocol PDU is tunneled;
        if the 'eoam(3)' BIT is set, then the ethernet Operation,
        Administration and Maintenance PDU is tunneled; if the
        'lldp(4)' BIT is set, then the Link Layer Discovery
        Protocol is tunneled.
        
        If the bit for a given protocol is set for an interface, then
        the statistics for that interface and protocol will start to be
        monitored."
    ::= { cltcTunneledProtocolEntry 1 }

Information by oid_info

Vendor: Cisco
Module: CISCO-L2-TUNNEL-CONFIG-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

cltcTunneledProtocolType OBJECT-TYPE
    SYNTAX          BITS {
                        cdp(0),
                        vtp(1),
                        stp(2),
                        eoam(3),
                        lldp(4)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Indicates tunneled protocol of the interface.

        If a BIT is set, then the value of the corresponding
        protocol is tunneled. Specifically, if the 'cdp(0)'
        BIT is set, then the Cisco Discovery Protocol PDU is
        tunneled; if the 'vtp(1)' BIT is set, then the VLAN
        Trunking Protocol PDU is tunneled; if the 'stp(2)' BIT
        is set, then the Spanning Tree Protocol PDU is tunneled;
        if the 'eoam(3)' BIT is set, then the ethernet Operation,
        Administration and Maintenance PDU is tunneled; if the
        'lldp(4)' BIT is set, then the Link Layer Discovery
        Protocol is tunneled.

        If the bit for a given protocol is set for an interface, then
        the statistics for that interface and protocol will start to be
        monitored." 
    ::= { cltcTunneledProtocolEntry 1 }

Information by cisco

cltcTunneledProtocolType OBJECT-TYPE
    SYNTAX          BITS {
                        cdp(0),
                        vtp(1),
                        stp(2),
                        eoam(3),
                        lldp(4)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Indicates tunneled protocol of the interface.

        If a BIT is set, then the value of the corresponding
        protocol is tunneled. Specifically, if the 'cdp(0)'
        BIT is set, then the Cisco Discovery Protocol PDU is
        tunneled; if the 'vtp(1)' BIT is set, then the VLAN
        Trunking Protocol PDU is tunneled; if the 'stp(2)' BIT
        is set, then the Spanning Tree Protocol PDU is tunneled;
        if the 'eoam(3)' BIT is set, then the ethernet Operation,
        Administration and Maintenance PDU is tunneled; if the
        'lldp(4)' BIT is set, then the Link Layer Discovery
        Protocol is tunneled.

        If the bit for a given protocol is set for an interface, then
        the statistics for that interface and protocol will start to be
        monitored." 
    ::= { cltcTunneledProtocolEntry 1 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.