This MIB module is for layer 2 tunneling related configurations
on a device.
Tunneling allows separate local networks to be considered as
a single VLAN. These separate networks are connected via an
ISP, which will tunnel the packets from one network to another,
making it appear as if the two networks are actually just one.
Parsed from file CISCO-L2-TUNNEL-CONFIG-MIB.mib
Module: CISCO-L2-TUNNEL-CONFIG-MIB
This MIB module is for layer 2 tunneling related configurations
on a device.
Tunneling allows separate local networks to be considered as
a single VLAN. These separate networks are connected via an
ISP, which will tunnel the packets from one network to another,
making it appear as if the two networks are actually just one.
Parsed from file CISCO-L2-TUNNEL-CONFIG-MIB.my.txt
Company: None
Module: CISCO-L2-TUNNEL-CONFIG-MIB
This MIB module is for layer 2 tunneling related configurations
on a device.
Tunneling allows separate local networks to be considered as
a single VLAN. These separate networks are connected via an
ISP, which will tunnel the packets from one network to another,
making it appear as if the two networks are actually just one.
ciscoL2TunnelConfigMIB MODULE-IDENTITY LAST-UPDATED "200702150000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: [email protected]" DESCRIPTION "This MIB module is for layer 2 tunneling related configurations on a device. Tunneling allows separate local networks to be considered as a single VLAN. These separate networks are connected via an ISP, which will tunnel the packets from one network to another, making it appear as if the two networks are actually just one." REVISION "200702150000Z" DESCRIPTION "Modify the descriptions of cltcTunneledProtocolType and cltcTunnelShutdownThreshold. Add 'lldp(4)' to cltcTunneledProtocolType, 'lldp(6)' to cltcTunnelThresholdProtocolIndex and 'lldp(6)' to cltcTunneledProtocolIndex. Add new groups cltcTunnelTotalDropGroup, cltcTunnelSysDropNotifEnableGroup, cltcTunnelSysDropGroup, cltcTunnelSysDropNotifGroup." REVISION "200607250000Z" DESCRIPTION "Modify the descriptions of cltcTunneledProtocolType and cltcTunnelShutdownThreshold." REVISION "200506270000Z" DESCRIPTION "Add 'eoam(3)' to cltcTunneledProtocolType, 'eoam(5)' to cltcTunnelThresholdProtocolIndex and 'eoam(5)' to cltcTunneledProtocolIndex." REVISION "200406090000Z" DESCRIPTION "Change the description for cltcTunnelThresholdProtocolIndex. Add the new groups cltcTunnelThresholdNotifsGroup and cltcNotifsEnableGroup." REVISION "200309030000Z" DESCRIPTION "Add a new object cltcTunnelDropStats. Remove the restriction for enabling cltcDot1qTunnelMode from the description." REVISION "200205311000Z" DESCRIPTION "Add SNMP support for 802.1q All Tagged (dot1q-all-tagged) Per Port feature. Dot1q-all-tagged feature is an enhancement to tag the packets on the native vlan to avoid any confusion in the ISP network, and to avoid vlan hopping when the native vlan for the trunk is as same as the vlan assigned for a customer. Before this enhancement, this feature can be enabled/disabled globally through the vlanTrunkPortsDot1qTag object in CISCO-VTP-MIB. With this enhacement, vlanTrunkPortsDot1qTag object in CISCO-VTP-MIB is deprecated and replaced by the dot1qAllTaggedEnabled object in this MIB. Additionally, dot1q-all-tag will be able to configure per port basis." REVISION "200202140000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 246 }
ciscoL2TunnelConfigMIB OBJECT IDENTIFIER ::= { ciscoMgmt 246 }
Vendor: Cisco
Module: CISCO-L2-TUNNEL-CONFIG-MIB
[Automatically extracted from oidview.com]
ciscoL2TunnelConfigMIB MODULE-IDENTITY LAST-UPDATED "200702150000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: [email protected]" DESCRIPTION "This MIB module is for layer 2 tunneling related configurations on a device. Tunneling allows separate local networks to be considered as a single VLAN. These separate networks are connected via an ISP, which will tunnel the packets from one network to another, making it appear as if the two networks are actually just one." REVISION "200702150000Z" DESCRIPTION "Modify the descriptions of cltcTunneledProtocolType and cltcTunnelShutdownThreshold. Add 'lldp(4)' to cltcTunneledProtocolType, 'lldp(6)' to cltcTunnelThresholdProtocolIndex and 'lldp(6)' to cltcTunneledProtocolIndex. Add new groups cltcTunnelTotalDropGroup, cltcTunnelSysDropNotifEnableGroup, cltcTunnelSysDropGroup, cltcTunnelSysDropNotifGroup." REVISION "200607250000Z" DESCRIPTION "Modify the descriptions of cltcTunneledProtocolType and cltcTunnelShutdownThreshold." REVISION "200506270000Z" DESCRIPTION "Add 'eoam(3)' to cltcTunneledProtocolType, 'eoam(5)' to cltcTunnelThresholdProtocolIndex and 'eoam(5)' to cltcTunneledProtocolIndex." REVISION "200406090000Z" DESCRIPTION "Change the description for cltcTunnelThresholdProtocolIndex. Add the new groups cltcTunnelThresholdNotifsGroup and cltcNotifsEnableGroup." REVISION "200309030000Z" DESCRIPTION "Add a new object cltcTunnelDropStats. Remove the restriction for enabling cltcDot1qTunnelMode from the description." REVISION "200205311000Z" DESCRIPTION "Add SNMP support for 802.1q All Tagged (dot1q-all-tagged) Per Port feature. Dot1q-all-tagged feature is an enhancement to tag the packets on the native vlan to avoid any confusion in the ISP network, and to avoid vlan hopping when the native vlan for the trunk is as same as the vlan assigned for a customer. Before this enhancement, this feature can be enabled/disabled globally through the vlanTrunkPortsDot1qTag object in CISCO-VTP-MIB. With this enhacement, vlanTrunkPortsDot1qTag object in CISCO-VTP-MIB is deprecated and replaced by the dot1qAllTaggedEnabled object in this MIB. Additionally, dot1q-all-tag will be able to configure per port basis." REVISION "200202140000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 246 }
ciscoL2TunnelConfigMIB MODULE-IDENTITY LAST-UPDATED "200702150000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: [email protected]" DESCRIPTION "This MIB module is for layer 2 tunneling related configurations on a device. Tunneling allows separate local networks to be considered as a single VLAN. These separate networks are connected via an ISP, which will tunnel the packets from one network to another, making it appear as if the two networks are actually just one." REVISION "200702150000Z" DESCRIPTION "Modify the descriptions of cltcTunneledProtocolType and cltcTunnelShutdownThreshold. Add 'lldp(4)' to cltcTunneledProtocolType, 'lldp(6)' to cltcTunnelThresholdProtocolIndex and 'lldp(6)' to cltcTunneledProtocolIndex. Add new groups cltcTunnelTotalDropGroup, cltcTunnelSysDropNotifEnableGroup, cltcTunnelSysDropGroup, cltcTunnelSysDropNotifGroup." REVISION "200607250000Z" DESCRIPTION "Modify the descriptions of cltcTunneledProtocolType and cltcTunnelShutdownThreshold." REVISION "200506270000Z" DESCRIPTION "Add 'eoam(3)' to cltcTunneledProtocolType, 'eoam(5)' to cltcTunnelThresholdProtocolIndex and 'eoam(5)' to cltcTunneledProtocolIndex." REVISION "200406090000Z" DESCRIPTION "Change the description for cltcTunnelThresholdProtocolIndex. Add the new groups cltcTunnelThresholdNotifsGroup and cltcNotifsEnableGroup." REVISION "200309030000Z" DESCRIPTION "Add a new object cltcTunnelDropStats. Remove the restriction for enabling cltcDot1qTunnelMode from the description." REVISION "200205311000Z" DESCRIPTION "Add SNMP support for 802.1q All Tagged (dot1q-all-tagged) Per Port feature. Dot1q-all-tagged feature is an enhancement to tag the packets on the native vlan to avoid any confusion in the ISP network, and to avoid vlan hopping when the native vlan for the trunk is as same as the vlan assigned for a customer. Before this enhancement, this feature can be enabled/disabled globally through the vlanTrunkPortsDot1qTag object in CISCO-VTP-MIB. With this enhacement, vlanTrunkPortsDot1qTag object in CISCO-VTP-MIB is deprecated and replaced by the dot1qAllTaggedEnabled object in this MIB. Additionally, dot1q-all-tag will be able to configure per port basis." REVISION "200202140000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 246 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.246.1 | cltcMIBObjects | 6 | 39 | None |
1.3.6.1.4.1.9.9.246.2 | cltcMIBNotifications | 1 | 4 | None |
1.3.6.1.4.1.9.9.246.3 | cltcMIBConformance | 2 | 19 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.9.9.197 | ciscoDistDirMIB | 3 | 123 | Cisco Distributed Director MIB. The Cisco Distributed Director provides global Internet scalability and increased performance as … |
1.3.6.1.4.1.9.9.198 | ciscoRfSupMIB | 3 | 58 | This MIB was designed to complement the CISCO-RF-MIB by providing additional optional status and configuration control for redund… |
1.3.6.1.4.1.9.9.199 | ciscoSmFileDownloadMIB | 3 | 23 | The MIB module for downloading files to the Service Modules specifically designed for an architecture containing a controller car… |
1.3.6.1.4.1.9.9.201 | ciscoSwitchUsageMIB | 3 | 15 | This MIB defines objects related to statistics for the usage of switch fabric. The switch fabric is used by the incoming packets … |
1.3.6.1.4.1.9.9.202 | ciscoOscpMIB | 3 | 52 | The MIB module for managing the Cisco Optical Supervisory Channel Protocol (OSCP). The OSCP is used to determine and maintain wav… |
1.3.6.1.4.1.9.9.204 | ciscoXdslLineMIB | 2 | 32 | The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to different t… |
1.3.6.1.4.1.9.9.215 | ciscoMacNotificationMIB | 3 | 72 | This MIB module is for configuration of the MAC notification feature. MAC notification is a mechanism to inform monitoring device… |
1.3.6.1.4.1.9.9.216 | ciscoContentNetworkMIB | 3 | 34 | This MIB module defines objects for Content Network devices. A Content Network is a collection of devices that optimizes the deli… |
1.3.6.1.4.1.9.9.217 | ciscoCat6kCrossbarMIB | 3 | 210 | The Catalyst 6000 Crossbar MIB provides instrumentation for configuration and operation of the crossbar switching fabric module, … |
1.3.6.1.4.1.9.9.218 | ciscoIfThresholdMIB | 3 | 65 | ciscoIfthresholdMIB |
1.3.6.1.4.1.9.9.219 | ciscoVoiceDnisMIB | 3 | 24 | The MIB module provides management support for Dialer Number Information Service (DNIS) mapping. A DNIS entry is associated with… |
1.3.6.1.4.1.9.9.220 | ciscoPaeMIB | 3 | 231 | Cisco Port Access Entity (PAE) module for managing IEEE Std 802.1x. This MIB provides Port Access Entity information that are eith… |
1.3.6.1.4.1.9.9.221 | ciscoEnhancedMemPoolMIB | 3 | 87 | New MIB module for monitoring the memory pools of all physical entities on a managed system. |
1.3.6.1.4.1.9.9.222 | ciscoEnhancedWredMIB | 3 | 70 | Cisco WRED MIB - Overview Cisco Weighted Random Early Detection/Drop (WRED) is a method which avoids traffic congestion on an outp… |
1.3.6.1.4.1.9.9.223 | ciscoWanNcdpMIB | 3 | 58 | This MIB module is intended for the management of network clock distribution and the Network Clock Distribution Protocol (NCDP) i… |
1.3.6.1.4.1.9.9.224 | ciscoDevExcepReportMIB | 3 | 29 | This mib defines the SNMP objects to report exceptions to north-bound NMS. The devices implementing this MIB monitor the status of… |
1.3.6.1.4.1.9.9.225 | ciscoLagMIB | 3 | 56 | Cisco Link Aggregation module for managing IEEE Std 802.3ad. This MIB provides Link Aggregation information that are either exclud… |
1.3.6.1.4.1.9.9.226 | ciscoNDEMIB | 4 | 17 | The Netflow Data Export (NDE) MIB provides instrumentation for configuration and operation of the Netflow Data Export feature. A … |
1.3.6.1.4.1.9.9.227 | ciscoItpAclMIB | 3 | 45 | The MIB for managing access lists that control messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Trans… |
1.3.6.1.4.1.9.9.228 | ciscoItpRtMIB | 3 | 47 | This MIB is for managing information required to route messages transported over Signalling System No. 7 (SS7) Network via Cisco … |
1.3.6.1.4.1.9.9.229 | ciscoDs1ExtMIB | 2 | 129 | The MIB module to describe DS1/E1 interface objects. This is an extension to the standard DS1/E1 MIB (RFC 2495). Unless mentioned… |
1.3.6.1.4.1.9.9.230 | ciscoItpActMIB | 3 | 29 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. This… |
1.3.6.1.4.1.9.9.231 | ciscoItpTextualConventions | 0 | 0 | The defines textual conventions used by to manage devices related to the SS7 network. The relevant ITU documents describing this… |
1.3.6.1.4.1.9.9.232 | ciscoItpSpMIB | 3 | 384 | The MIB for managing Signalling Points and its associated messages transported over Signalling System No. 7 (SS7) Network via Ci… |
1.3.6.1.4.1.9.9.233 | ciscoItpSccpMIB | 3 | 194 | The MIB for Signaling Connection Control Part(SCCP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP … |
1.3.6.1.4.1.9.9.234 | ciscoWanTopologyMIB | 3 | 83 | A management station can use this MIB module for the maintenance of persistent topology information of the PNNI network. Previous… |
1.3.6.1.4.1.9.9.235 | ciscoImaMIB | 2 | 60 | The MIB module describes Cisco IMA objects. This is an extension to the standard of ATM Forum IMA version 1.1, AF-PHY-0086.001 Spe… |
1.3.6.1.4.1.9.9.236 | ciscoWanSctMgmtMIB | 2 | 18 | MIB module to manage SCT files in a node. SCTs (Service Class Templates) are nodal configuration files, which define the traffic … |
1.3.6.1.4.1.9.9.237 | ciscoNmsApplHealthMIB | 3 | 21 | This MIB defines Cisco NMS Application (cna) Health Status Notifications and the related objects. These notifications will be sen… |
1.3.6.1.4.1.9.9.238 | ciscoIGMPFilterMIB | 2 | 45 | IGMP Filter configuration MIB. This MIB provides a mechanism for users to configure the system to intercept IGMP joins for IP Mul… |
1.3.6.1.4.1.9.9.240 | cGgsnMIB | 3 | 389 | This MIB module manages the Gateway GPRS Support Node (GGSN) devices. A GGSN device provides interworking with external packet-dat… |
1.3.6.1.4.1.9.9.241 | cggsnQosMIB | 2 | 89 | This MIB module manages the Quality of Service parameters of GGSN in a GPRS system. GGSN is the Gateway GPRS Support Node in the … |
1.3.6.1.4.1.9.9.242 | ciscoCableAvailabilityMIB | 3 | 60 | This is the MIB module for management of Hot Standby Connection to Connection Protocol (HCCP) features. HCCP is a Cisco proprieta… |
1.3.6.1.4.1.9.9.243 | ciscoHealthMonitorMIB | 3 | 22 | Health Monitor MIB module. The Health Monitor uses a model based on events of varying severity and frequency, and predefined rule… |
1.3.6.1.4.1.9.9.244 | ciscoNbarProtocolDiscoveryMIB | 3 | 84 | Cisco NBAR Protocol Discovery MIB NBAR - Network Based Application Recognition is an intelligent classification engine that reco… |
1.3.6.1.4.1.9.9.245 | ciscoGtpDirectorMIB | 3 | 35 | This MIB module defines objects that are used to manage GTP Director Module. In the GPRS network, the APN is the identifier that s… |
1.3.6.1.4.1.9.9.248 | ciscoItpSp2MIB | 3 | 30 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signaling System No. 7(SS7) Network. This … |
1.3.6.1.4.1.9.9.249 | ciscoEnhancedImageMIB | 2 | 44 | Initial version of the MIB. This MIB has Image table containing the following information related to the running IOS image 1. Enti… |
1.3.6.1.4.1.9.9.252 | cTapMIB | 3 | 80 | This module manages Cisco's intercept feature. |
1.3.6.1.4.1.9.9.253 | ciscoItpXuaMIB | 3 | 250 | The MIB for MTP3 User Adaptation (M3UA) and SCCP User Adaptation (SUA) for Cisco's IP Transfer Point (ITP) implementation. The Cis… |
1.3.6.1.4.1.9.9.254 | ciscoSlbExtMIB | 3 | 425 | The extended MIB for managing Server Load Balancing Manager(s). This MIB extends the SLB management functionality in the CISCO-SL… |
1.3.6.1.4.1.9.9.255 | ciscoFabricMcastMIB | 3 | 30 | Fabric Multicast Resource MIB module. This MIB module is used for managing/tracking the fabric multicast resource related informa… |
1.3.6.1.4.1.9.9.256 | ciscoFabricMcastApplMIB | 3 | 16 | Fabric multicast resource MIB module. This MIB module is used for managing/tracking the fabric multicast resource application rel… |
1.3.6.1.4.1.9.9.257 | ciscoFabricHfrMIB | 3 | 90 | Cisco Enhanced Benes fabric MIB module. This MIB module is used for managing/tracking the Ehanced Benes Fabric entities and/or fa… |
1.3.6.1.4.1.9.9.259 | ciscoPsaMicrocodeMIB | 3 | 24 | Cisco PSA Microcode MIB - Overview The PSA is the Packet Switching ASIC used in module like engine 2(E2) line cards in GSR for IP … |
1.3.6.1.4.1.9.9.260 | ciscoSsgMIB | 3 | 218 | The MIB Module manages Service Selection Gateway(SSG) devices. Service Selection Gateway(SSG) is a switching solution for service… |
1.3.6.1.4.1.9.9.261 | ciscoPtopoExtnMIB | 2 | 18 | This MIB module contains extensions to the PTOPO-MIB that provide support to distinguish between bidirectional and unidirectional… |
1.3.6.1.4.1.9.9.262 | ciscoVoaMIB | 2 | 14 | This MIB module defines objects to configure and manage the Variable Optical Attenuator (VOA) modules. VOA modules are typically … |
1.3.6.1.4.1.9.9.263 | ciscoIgmpSnoopingMIB | 3 | 286 | The MIB module for IGMP Snooping feature. Internet Group Management Protocol (IGMP) is the protocol used by IPv4 end hosts to ind… |
1.3.6.1.4.1.9.9.264 | ciscoOpticalMonitorMIB | 3 | 72 | This MIB module defines objects to monitor optical characteristics and set corresponding thresholds on the optical interfaces in … |
1.3.6.1.4.1.9.9.265 | ciscoEntityPfeMib | 3 | 58 | The Packet Forwarding Engine technology are Cisco developed Network Processors, which accelerates certain features in order to pr… |
1.3.6.1.4.1.9.9.268 | ciscoWlanVlanMIB | 3 | 41 | This MIB module provides network management support for device VLAN configuration on IEEE 802.11 wireless LAN. ACRONYMS AES Advanced… |
1.3.6.1.4.1.9.9.269 | ciscoTBridgeDevIfMIB | 2 | 20 | This MIB module provides network management support for configuration and status information of devices supporting transparent br… |
1.3.6.1.4.1.9.9.270 | ciscoSyslogEventExtMIB | 2 | 21 | This MIB module extends the Cisco Syslog MIB and provides network management support to handle and process Syslog messages as devi… |
1.3.6.1.4.1.9.9.271 | ciscoL2DevMonMIB | 3 | 24 | This MIB module is for monitoring of active layer 2 devices by hot standby layer 2 devices and the configuration of hot standby s… |
1.3.6.1.4.1.9.9.272 | ciscoDot11IfMIB | 3 | 212 | This MIB module provides network management support for Cisco IEEE 802.11 Wireless LAN type device (Access Point) radio interface… |
1.3.6.1.4.1.9.9.273 | ciscoDot11AssociationMIB | 2 | 91 | This MIB module provides network management information on IEEE 802.11 wireless device association management and data packet for… |
1.3.6.1.4.1.9.9.275 | ciscoBcpMIB | 2 | 25 | This MIB module describes the Managed Objects for of Bridge Control Protocol (RFC2878). This MIB is influenced by RFC1474. |
1.3.6.1.4.1.9.9.276 | ciscoIfExtensionMIB | 3 | 143 | A MIB module for extending the IF-MIB (RFC2863) to add objects which provide additional information about interfaces not availabl… |
1.3.6.1.4.1.9.9.277 | ciscoDdpIappMIB | 3 | 22 | This MIB module describes the management support for the Inter-Access Point Protocol (IAPP). IAPP is a Cisco propriety Data Deli… |
1.3.6.1.4.1.9.9.278 | ciscoIpProtocolMIB | 3 | 63 | The MIB module is for management of information to support packet filtering on IP protocols. The cippfIpProfileTable allows users… |
1.3.6.1.4.1.9.9.279 | ciscoAtmQosMIB | 3 | 67 | The MIB is created to provide ATM QoS information in these areas: 1. Traffic shaping on a per-VC basis 2. Traffic shaping on a pe… |
1.3.6.1.4.1.9.9.280 | ciscoOutageMIB | 3 | 75 | This MIB module describes, stores, and reports outage related information generated by individual hardware and software component… |
1.3.6.1.4.1.9.9.281 | ciscoFabricC12kMIB | 3 | 135 | Cisco Fabric MIB module for c12000 series of routers. This MIB module is used for managing/tracking the c12000 fabric entities an… |
1.3.6.1.4.1.9.9.282 | ciscoVsanMIB | 2 | 104 | The MIB module for the management of the Virtual Storage Networks (VSANs) within the frame work of Cisco's VSAN Architecture. T… |
1.3.6.1.4.1.9.9.284 | ciscoFcRouteMIB | 2 | 55 | The MIB module for configuring and displaying FC (Fibre Channel) Route Information. |
1.3.6.1.4.1.9.9.285 | ciscoPortChannelMIB | 2 | 40 | The MIB module for management of Port Channel ports. In addition to this MIB, CISCO-FC-FE-MIB and interface mib (rfc2863) will al… |
1.3.6.1.4.1.9.9.286 | ciscoWwnmgrMIB | 2 | 38 | The World Wide Name (WWN) in the fibre channel networking technology is equivalent to the MAC address in Ethernet. There are six … |
1.3.6.1.4.1.9.9.287 | ciscoFspfMIB | 4 | 95 | Fabric Shortest Path First (FSPF) MIB. |
1.3.6.1.4.1.9.9.288 | ciscoRadiusMIB | 3 | 91 | MIB module for monitoring and configuring authentication and logging services using RADIUS (Remote Authentication Dial In User Se… |
1.3.6.1.4.1.9.9.289 | ciscoFcFeMIB | 2 | 315 | This is the Cisco fibre element management MIB module. It covers: - Cisco extension to the interface MIB ( IF-MIB ) - Contains all… |
1.3.6.1.4.1.9.9.290 | ciscoVirtualNwIfMIB | 2 | 22 | The MIB module for management of virtual network interfaces to VSAN and VLAN. |
1.3.6.1.4.1.9.9.292 | ciscoRscnMIB | 2 | 67 | The MIB module for the management of the Fibre Channel's Registered State Change Notification (RSCN) functionality, which is spec… |
1.3.6.1.4.1.9.9.293 | ciscoNsMIB | 2 | 67 | The MIB module for the management of the Cisco Name Server which realizes the FC-GS3 requirements for Name Server (NS). |
1.3.6.1.4.1.9.9.294 | ciscoZsMIB | 2 | 254 | The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the … |
1.3.6.1.4.1.9.9.295 | ciscoFcPingMIB | 2 | 37 | The MIB module for the management of the Fibre Channel Ping functionality. |
1.3.6.1.4.1.9.9.296 | ciscoFcTraceRouteMIB | 2 | 31 | The MIB module for the management of the Fibre Channel Trace Route functionality. |
... |