The action to perform a consistency check of
fcRouteTable.
none (1) - no action
verify (2) - perform verify action
Writing verify(2) does a consistency check
of the fcRouteTable with either one of the following:
- with routeTable in the persistent database if the
fcRouteVerifyType value is pss(1)
- with forwarding information base software tables on
the module specified by fcRouteVerifyModule, if the
fcRouteVerifyType value is fibShadow(2).
- with forwarding information base hardware tables on
the module specified by fcRouteVerifyModule if the
fcRouteVerifyType value is fibHardware(3).
This verify action is performed on the fcRouteTable for
the VSAN specified by fcRouteVerifyVsanID and for the
route entries of the type specified by
fcRouteVerifyRouteType.
The result is shown by fcRouteVerifyResult.
If a verify, due to a previous action performed, is in
progress in the agent, then setting the
fcRouteVerifyAction to verify(2) again will fail.
No verification is performed if the value is set to
none(1).
When read, this object always has the value 'none(1)'.
Parsed from file CISCO-FC-ROUTE-MIB.mib
Module: CISCO-FC-ROUTE-MIB
The action to perform a consistency check of
fcRouteTable.
none (1) - no action
verify (2) - perform verify action
Writing verify(2) does a consistency check
of the fcRouteTable with either one of the following:
- with routeTable in the persistent database if the
fcRouteVerifyType value is pss(1)
- with forwarding information base software tables on
the module specified by fcRouteVerifyModule, if the
fcRouteVerifyType value is fibShadow(2).
- with forwarding information base hardware tables on
the module specified by fcRouteVerifyModule if the
fcRouteVerifyType value is fibHardware(3).
This verify action is performed on the fcRouteTable for
the VSAN specified by fcRouteVerifyVsanID and for the
route entries of the type specified by
fcRouteVerifyRouteType.
The result is shown by fcRouteVerifyResult.
If a verify, due to a previous action performed, is in
progress in the agent, then setting the
fcRouteVerifyAction to verify(2) again will fail.
No verification is performed if the value is set to
none(1).
When read, this object always has the value 'none(1)'.
The action to perform a consistency check of
fcRouteTable.
none (1) - no action
verify (2) - perform verify action
Writing verify(2) does a consistency check
of the fcRouteTable with either one of the following:
- with routeTable in the persistent database if the
fcRouteVerifyType value is pss(1)
- with forwarding information base software tables on
the module specified by fcRouteVerifyModule, if the
fcRouteVerifyType value is fibShadow(2).
- with forwarding information base hardware tables on
the module specified by fcRouteVerifyModule if the
fcRouteVerifyType value is fibHardware(3).
This verify action is performed on the fcRouteTable for
the VSAN specified by fcRouteVerifyVsanID and for the
route entries of the type specified by
fcRouteVerifyRouteType.
The result is shown by fcRouteVerifyResult.
If a verify, due to a previous action performed, is in
progress in the agent, then setting the
fcRouteVerifyAction to verify(2) again will fail.
No verification is performed if the value is set to
none(1).
When read, this object always has the value 'none(1)'.
Parsed from file CISCO-FC-ROUTE-MIB.my.txt
Company: None
Module: CISCO-FC-ROUTE-MIB
The action to perform a consistency check of
fcRouteTable.
none (1) - no action
verify (2) - perform verify action
Writing verify(2) does a consistency check
of the fcRouteTable with either one of the following:
- with routeTable in the persistent database if the
fcRouteVerifyType value is pss(1)
- with forwarding information base software tables on
the module specified by fcRouteVerifyModule, if the
fcRouteVerifyType value is fibShadow(2).
- with forwarding information base hardware tables on
the module specified by fcRouteVerifyModule if the
fcRouteVerifyType value is fibHardware(3).
This verify action is performed on the fcRouteTable for
the VSAN specified by fcRouteVerifyVsanID and for the
route entries of the type specified by
fcRouteVerifyRouteType.
The result is shown by fcRouteVerifyResult.
If a verify, due to a previous action performed, is in
progress in the agent, then setting the
fcRouteVerifyAction to verify(2) again will fail.
No verification is performed if the value is set to
none(1).
When read, this object always has the value 'none(1)'.
fcRouteVerifyAction OBJECT-TYPE SYNTAX INTEGER { none(1), verify(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action to perform a consistency check of fcRouteTable. none (1) - no action verify (2) - perform verify action Writing verify(2) does a consistency check of the fcRouteTable with either one of the following: - with routeTable in the persistent database if the fcRouteVerifyType value is pss(1) - with forwarding information base software tables on the module specified by fcRouteVerifyModule, if the fcRouteVerifyType value is fibShadow(2). - with forwarding information base hardware tables on the module specified by fcRouteVerifyModule if the fcRouteVerifyType value is fibHardware(3). This verify action is performed on the fcRouteTable for the VSAN specified by fcRouteVerifyVsanID and for the route entries of the type specified by fcRouteVerifyRouteType. The result is shown by fcRouteVerifyResult. If a verify, due to a previous action performed, is in progress in the agent, then setting the fcRouteVerifyAction to verify(2) again will fail. No verification is performed if the value is set to none(1). When read, this object always has the value 'none(1)'. " DEFVAL { none } ::= { fcRouteConfig 3 }
fcRouteVerifyAction OBJECT-TYPE SYNTAX INTEGER { none(1), verify(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The action to perform a consistency check of fcRouteTable. none (1) - no action verify (2) - perform verify action Writing verify(2) does a consistency check of the fcRouteTable with either one of the following: - with routeTable in the persistent database if the fcRouteVerifyType value is pss(1) - with forwarding information base software tables on the module specified by fcRouteVerifyModule, if the fcRouteVerifyType value is fibShadow(2). - with forwarding information base hardware tables on the module specified by fcRouteVerifyModule if the fcRouteVerifyType value is fibHardware(3). This verify action is performed on the fcRouteTable for the VSAN specified by fcRouteVerifyVsanID and for the route entries of the type specified by fcRouteVerifyRouteType. The result is shown by fcRouteVerifyResult. If a verify, due to a previous action performed, is in progress in the agent, then setting the fcRouteVerifyAction to verify(2) again will fail. No verification is performed if the value is set to none(1). When read, this object always has the value 'none(1)'. " DEFVAL { none } ::= { fcRouteConfig 3 }
Vendor: Cisco
Module: CISCO-FC-ROUTE-MIB
[Automatically extracted from oidview.com]
fcRouteVerifyAction OBJECT-TYPE SYNTAX INTEGER { none(1), verify(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action to perform a consistency check of fcRouteTable. none (1) - no action verify (2) - perform verify action Writing verify(2) does a consistency check of the fcRouteTable with either one of the following: - with routeTable in the persistent database if the fcRouteVerifyType value is pss(1) - with forwarding information base software tables on the module specified by fcRouteVerifyModule, if the fcRouteVerifyType value is fibShadow(2). - with forwarding information base hardware tables on the module specified by fcRouteVerifyModule if the fcRouteVerifyType value is fibHardware(3). This verify action is performed on the fcRouteTable for the VSAN specified by fcRouteVerifyVsanID and for the route entries of the type specified by fcRouteVerifyRouteType. The result is shown by fcRouteVerifyResult. If a verify, due to a previous action performed, is in progress in the agent, then setting the fcRouteVerifyAction to verify(2) again will fail. No verification is performed if the value is set to none(1). When read, this object always has the value 'none(1)'. " DEFVAL { none } ::= { fcRouteConfig 3 }
fcRouteVerifyAction OBJECT-TYPE SYNTAX INTEGER { none(1), verify(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action to perform a consistency check of fcRouteTable. none (1) - no action verify (2) - perform verify action Writing verify(2) does a consistency check of the fcRouteTable with either one of the following: - with routeTable in the persistent database if the fcRouteVerifyType value is pss(1) - with forwarding information base software tables on the module specified by fcRouteVerifyModule, if the fcRouteVerifyType value is fibShadow(2). - with forwarding information base hardware tables on the module specified by fcRouteVerifyModule if the fcRouteVerifyType value is fibHardware(3). This verify action is performed on the fcRouteTable for the VSAN specified by fcRouteVerifyVsanID and for the route entries of the type specified by fcRouteVerifyRouteType. The result is shown by fcRouteVerifyResult. If a verify, due to a previous action performed, is in progress in the agent, then setting the fcRouteVerifyAction to verify(2) again will fail. No verification is performed if the value is set to none(1). When read, this object always has the value 'none(1)'. " DEFVAL { none } ::= { fcRouteConfig 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.284.1.1.3.0 | fcRouteVerifyAction | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.284.1.1.1 | fcRouteLastChangeTime | 1 | 1 | The value of sysUpTime at the most recent time when a conceptual row was created, modified, or deleted in fcRouteTable. If no chan… |
1.3.6.1.4.1.9.9.284.1.1.2 | fcRoutePreference | 1 | 1 | The value of route preference.Route preference is the value used to select one route over other when more than one route to the s… |
1.3.6.1.4.1.9.9.284.1.1.4 | fcRouteVerifyType | 1 | 1 | The value used by fcRouteVerifyAction to perform the consistency check of fcRouteTable with: - route table in persistent database… |
1.3.6.1.4.1.9.9.284.1.1.5 | fcRouteVerifyModule | 1 | 1 | This value identifies a particular line card module according to that module's value of entPhysicalIndex in the entPhysicalTable … |
1.3.6.1.4.1.9.9.284.1.1.6 | fcRouteVerifyVsanID | 1 | 1 | The value specifies the VSAN id. The fcRouteTable entries and the entries in the table specified by fcRouteVerifyType is checked … |
1.3.6.1.4.1.9.9.284.1.1.7 | fcRouteVerifyRouteType | 1 | 1 | The value used by fcRouteVerifyAction to perform the consistency check of fcRouteTable. If the value is unicast(1) then only unic… |
1.3.6.1.4.1.9.9.284.1.1.8 | fcRouteVerifyResult | 1 | 1 | The object displays the details of the first inconsistency that occured from the check. If the check passes successfully then thi… |
1.3.6.1.4.1.9.9.284.1.1.9 | fcRouteVerifyLock | 1 | 1 | This object is used to facilitate the verify action performed using 'fcRouteVerifyAction' by multiple managers. The procedure to p… |
1.3.6.1.4.1.9.9.284.1.1.10 | fcRouteTable | 1 | 10 | The local system's Fibre Channel Routing table. This table lists all the routes that is configured/ calculated at the local syste… |