Reference record for OID 1.3.6.1.4.1.9.9.284.1.1.9



parent
1.3.6.1.4.1.9.9.284.1.1 (fcRouteConfig)
node code
9
node name
fcRouteVerifyLock
dot oid
1.3.6.1.4.1.9.9.284.1.1.9
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFcRouteMIB(284) ciscoFcRouteMIBObjects(1) fcRouteConfig(1) fcRouteVerifyLock(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFcRouteMIB(284) ciscoFcRouteMIBObjects(1) fcRouteConfig(1) fcRouteVerifyLock(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFcRouteMIB(284) ciscoFcRouteMIBObjects(1) fcRouteConfig(1) fcRouteVerifyLock(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFcRouteMIB(284) ciscoFcRouteMIBObjects(1) fcRouteConfig(1) fcRouteVerifyLock(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFcRouteMIB(284) ciscoFcRouteMIBObjects(1) fcRouteConfig(1) fcRouteVerifyLock(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFcRouteMIB(284) ciscoFcRouteMIBObjects(1) fcRouteConfig(1) fcRouteVerifyLock(9)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFcRouteMIB/ciscoFcRouteMIBObjects/fcRouteConfig/fcRouteVerifyLock
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFcRouteMIB/ciscoFcRouteMIBObjects/fcRouteConfig/fcRouteVerifyLock
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFcRouteMIB/ciscoFcRouteMIBObjects/fcRouteConfig/fcRouteVerifyLock
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFcRouteMIB/ciscoFcRouteMIBObjects/fcRouteConfig/fcRouteVerifyLock
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFcRouteMIB/ciscoFcRouteMIBObjects/fcRouteConfig/fcRouteVerifyLock
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFcRouteMIB/ciscoFcRouteMIBObjects/fcRouteConfig/fcRouteVerifyLock
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/284/1/1/9

    Description by circitor

    This object is used to facilitate the verify action
    performed using 'fcRouteVerifyAction' by multiple
    managers.
    The procedure to perform the action by the NMS is as
    follows:

    1. Retrieve the value of fcRouteVerifyLock.

    2. Set the value of fcRouteVerifyLock to the retrieved
    value, and in the same PDU provide the following
    values:
    fcRouteVerifyAction to 'verify(2)'
    fcRouteVerifyType,fcRouteVerifyVsanID,
    fcRouteVerifyRouteType and fcRouteVerifyModule.
    Note, fcRouteVerifyModule is relevent only if
    fcRouteVerifyType is either 'fibShadow(2)' or
    fibHardware(3).

    3. If the set fails repeat steps 1-2.

    4. Retrieve the value of fcRouteVerifyLock and
    fcRouteVerifyResult in the same pdu.

    5. If 'fcRouteVerifyLock' value is not one greater than
    the retrieved value of 'fcRouteVerifyLock' in step-1
    than repeat steps 1-4.

    Parsed from file CISCO-FC-ROUTE-MIB.mib
    Module: CISCO-FC-ROUTE-MIB

    Description by cisco_v1

    This object is used to facilitate the verify action
    performed using 'fcRouteVerifyAction' by multiple
    managers.
    The procedure to perform the action by the NMS is as
    follows:

    1. Retrieve the value of fcRouteVerifyLock.

    2. Set the value of fcRouteVerifyLock to the retrieved
    value, and in the same PDU provide the following
    values:
    fcRouteVerifyAction to 'verify(2)'
    fcRouteVerifyType,fcRouteVerifyVsanID,
    fcRouteVerifyRouteType and fcRouteVerifyModule.
    Note, fcRouteVerifyModule is relevent only if
    fcRouteVerifyType is either 'fibShadow(2)' or
    fibHardware(3).

    3. If the set fails repeat steps 1-2.

    4. Retrieve the value of fcRouteVerifyLock and
    fcRouteVerifyResult in the same pdu.

    5. If 'fcRouteVerifyLock' value is not one greater than
    the retrieved value of 'fcRouteVerifyLock' in step-1
    than repeat steps 1-4.

    Description by mibdepot

    This object is used to facilitate the verify action
    performed using 'fcRouteVerifyAction' by multiple
    managers.
    The procedure to perform the action by the NMS is as
    follows:

    1. Retrieve the value of fcRouteVerifyLock.

    2. Set the value of fcRouteVerifyLock to the retrieved
    value, and in the same PDU provide the following
    values:
    fcRouteVerifyAction to 'verify(2)'
    fcRouteVerifyType,fcRouteVerifyVsanID,
    fcRouteVerifyRouteType and fcRouteVerifyModule.
    Note, fcRouteVerifyModule is relevent only if
    fcRouteVerifyType is either 'fibShadow(2)' or
    fibHardware(3).

    3. If the set fails repeat steps 1-2.

    4. Retrieve the value of fcRouteVerifyLock and
    fcRouteVerifyResult in the same pdu.

    5. If 'fcRouteVerifyLock' value is not one greater than
    the retrieved value of 'fcRouteVerifyLock' in step-1
    than repeat steps 1-4.

    Parsed from file CISCO-FC-ROUTE-MIB.my.txt
    Company: None
    Module: CISCO-FC-ROUTE-MIB

    Description by cisco

    This object is used to facilitate the verify action
    performed using 'fcRouteVerifyAction' by multiple
    managers.
    The procedure to perform the action by the NMS is as
    follows:

    1. Retrieve the value of fcRouteVerifyLock.

    2. Set the value of fcRouteVerifyLock to the retrieved
    value, and in the same PDU provide the following
    values:
    fcRouteVerifyAction to 'verify(2)'
    fcRouteVerifyType,fcRouteVerifyVsanID,
    fcRouteVerifyRouteType and fcRouteVerifyModule.
    Note, fcRouteVerifyModule is relevent only if
    fcRouteVerifyType is either 'fibShadow(2)' or
    fibHardware(3).

    3. If the set fails repeat steps 1-2.

    4. Retrieve the value of fcRouteVerifyLock and
    fcRouteVerifyResult in the same pdu.

    5. If 'fcRouteVerifyLock' value is not one greater than
    the retrieved value of 'fcRouteVerifyLock' in step-1
    than repeat steps 1-4.

    Information by circitor

    fcRouteVerifyLock OBJECT-TYPE
        SYNTAX      TestAndIncr
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "This object is used to facilitate the verify action 
               performed using 'fcRouteVerifyAction' by multiple 
               managers.
               The procedure to perform the action by the NMS is as
               follows:

               1. Retrieve the value of fcRouteVerifyLock.

               2. Set the value of fcRouteVerifyLock to the retrieved
                  value, and in the same PDU provide the following 
                  values:
                  fcRouteVerifyAction to 'verify(2)'
                  fcRouteVerifyType,fcRouteVerifyVsanID,
                  fcRouteVerifyRouteType and fcRouteVerifyModule.
                  Note, fcRouteVerifyModule is relevent only if
                  fcRouteVerifyType is either 'fibShadow(2)' or
                  fibHardware(3).

               3. If the set fails repeat steps 1-2.

               4. Retrieve the value of fcRouteVerifyLock and 
                  fcRouteVerifyResult in the same pdu.

               5. If 'fcRouteVerifyLock' value is not one greater than
                  the retrieved value of 'fcRouteVerifyLock' in step-1
                  than repeat steps 1-4. "
        ::= { fcRouteConfig 9 }

    Information by cisco_v1

    fcRouteVerifyLock OBJECT-TYPE
    SYNTAX TestAndIncr

    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used to facilitate the verify action 
         performed using 'fcRouteVerifyAction' by multiple 
         managers.
         The procedure to perform the action by the NMS is as
         follows:
        
         1. Retrieve the value of fcRouteVerifyLock.
        
         2. Set the value of fcRouteVerifyLock to the retrieved
            value, and in the same PDU provide the following 
            values:
            fcRouteVerifyAction to 'verify(2)'
            fcRouteVerifyType,fcRouteVerifyVsanID,
            fcRouteVerifyRouteType and fcRouteVerifyModule.
            Note, fcRouteVerifyModule is relevent only if
            fcRouteVerifyType is either 'fibShadow(2)' or
            fibHardware(3).
        
         3. If the set fails repeat steps 1-2.
        
         4. Retrieve the value of fcRouteVerifyLock and 
            fcRouteVerifyResult in the same pdu.
        
         5. If 'fcRouteVerifyLock' value is not one greater than
            the retrieved value of 'fcRouteVerifyLock' in step-1
            than repeat steps 1-4. "
    ::= { fcRouteConfig 9 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-FC-ROUTE-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    fcRouteVerifyLock OBJECT-TYPE
        SYNTAX      TestAndIncr
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "This object is used to facilitate the verify action 
               performed using 'fcRouteVerifyAction' by multiple 
               managers.
               The procedure to perform the action by the NMS is as
               follows:

               1. Retrieve the value of fcRouteVerifyLock.

               2. Set the value of fcRouteVerifyLock to the retrieved
                  value, and in the same PDU provide the following 
                  values:
                  fcRouteVerifyAction to 'verify(2)'
                  fcRouteVerifyType,fcRouteVerifyVsanID,
                  fcRouteVerifyRouteType and fcRouteVerifyModule.
                  Note, fcRouteVerifyModule is relevent only if
                  fcRouteVerifyType is either 'fibShadow(2)' or
                  fibHardware(3).

               3. If the set fails repeat steps 1-2.

               4. Retrieve the value of fcRouteVerifyLock and 
                  fcRouteVerifyResult in the same pdu.

               5. If 'fcRouteVerifyLock' value is not one greater than
                  the retrieved value of 'fcRouteVerifyLock' in step-1
                  than repeat steps 1-4. "
        ::= { fcRouteConfig 9 }

    Information by cisco

    fcRouteVerifyLock OBJECT-TYPE
        SYNTAX      TestAndIncr
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "This object is used to facilitate the verify action 
               performed using 'fcRouteVerifyAction' by multiple 
               managers.
               The procedure to perform the action by the NMS is as
               follows:

               1. Retrieve the value of fcRouteVerifyLock.

               2. Set the value of fcRouteVerifyLock to the retrieved
                  value, and in the same PDU provide the following 
                  values:
                  fcRouteVerifyAction to 'verify(2)'
                  fcRouteVerifyType,fcRouteVerifyVsanID,
                  fcRouteVerifyRouteType and fcRouteVerifyModule.
                  Note, fcRouteVerifyModule is relevent only if
                  fcRouteVerifyType is either 'fibShadow(2)' or
                  fibHardware(3).

               3. If the set fails repeat steps 1-2.

               4. Retrieve the value of fcRouteVerifyLock and 
                  fcRouteVerifyResult in the same pdu.

               5. If 'fcRouteVerifyLock' value is not one greater than
                  the retrieved value of 'fcRouteVerifyLock' in step-1
                  than repeat steps 1-4. "
        ::= { fcRouteConfig 9 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.284.1.1.9.0 fcRouteVerifyLock 0 0 None

    Brothers (9)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.284.1.1.1 fcRouteLastChangeTime 1 1 The value of sysUpTime at the most recent time when a
    conceptual row was created, modified, or deleted in
    fcRouteTable.
    If no chan…
    1.3.6.1.4.1.9.9.284.1.1.2 fcRoutePreference 1 1 The value of route preference.Route preference is the
    value used to select one route over other when more than
    one route to the s…
    1.3.6.1.4.1.9.9.284.1.1.3 fcRouteVerifyAction 1 1 The action to perform a consistency check of
    fcRouteTable.
    none (1) - no action
    verify (2) - perform verify action
    Writing verify…
    1.3.6.1.4.1.9.9.284.1.1.4 fcRouteVerifyType 1 1 The value used by fcRouteVerifyAction to perform the
    consistency check of fcRouteTable with:
    - route table in persistent database…
    1.3.6.1.4.1.9.9.284.1.1.5 fcRouteVerifyModule 1 1 This value identifies a particular line card module
    according to that module's value of entPhysicalIndex in
    the entPhysicalTable …
    1.3.6.1.4.1.9.9.284.1.1.6 fcRouteVerifyVsanID 1 1 The value specifies the VSAN id. The fcRouteTable
    entries and the entries in the table specified by
    fcRouteVerifyType is checked …
    1.3.6.1.4.1.9.9.284.1.1.7 fcRouteVerifyRouteType 1 1 The value used by fcRouteVerifyAction to perform the
    consistency check of fcRouteTable. If the value is
    unicast(1) then only unic…
    1.3.6.1.4.1.9.9.284.1.1.8 fcRouteVerifyResult 1 1 The object displays the details of the first
    inconsistency that occured from the check. If the check
    passes successfully then thi…
    1.3.6.1.4.1.9.9.284.1.1.10 fcRouteTable 1 10 The local system's Fibre Channel Routing table.
    This table lists all the routes that is configured/
    calculated at the local syste…