This object defines the type of digit map order.
The MGC can advise and load the gateway with a digit map
that correspond to the dial plan to collect the access
codes, credit card numbers and other numbers requested
by call control services.
Parsed from file CISCO-XGCP-EXT-MIB.mib
Module: CISCO-XGCP-EXT-MIB
This object defines the type of digit map order.
The MGC can advise and load the gateway with a digit map
that correspond to the dial plan to collect the access
codes, credit card numbers and other numbers requested
by call control services.
This object defines the type of digit map order.
The MGC can advise and load the gateway with a digit map
that correspond to the dial plan to collect the access
codes, credit card numbers and other numbers requested
by call control services.
Parsed from file CISCO-XGCP-EXT-MIB.my.txt
Company: None
Module: CISCO-XGCP-EXT-MIB
This object defines the type of digit map order.
The MGC can advise and load the gateway with a digit map
that correspond to the dial plan to collect the access
codes, credit card numbers and other numbers requested
by call control services.
cxeCallCtrlDigitMapOrder OBJECT-TYPE SYNTAX INTEGER { dmOrderShortest (1), dmOrderOrdered (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the type of digit map order. The MGC can advise and load the gateway with a digit map that correspond to the dial plan to collect the access codes, credit card numbers and other numbers requested by call control services." REFERENCE "RFC2705, 2.1.5 Digit Maps" DEFVAL { dmOrderShortest } ::= { cxeCallCtrlConfigEntry 11 }
cxeCallCtrlDigitMapOrder OBJECT-TYPE SYNTAX INTEGER { dmOrderShortest(1), dmOrderOrdered(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the type of digit map order. The MGC can advise and load the gateway with a digit map that correspond to the dial plan to collect the access codes, credit card numbers and other numbers requested by call control services." REFERENCE "RFC2705, 2.1.5 Digit Maps" DEFVAL { dmOrderShortest } ::= { cxeCallCtrlConfigEntry 11 }
Vendor: Cisco Systems
Module: CISCO-XGCP-EXT-MIB (CISCO-XGCP-EXT-MIB-V1SMI.my)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
cxeCallCtrlDigitMapOrder OBJECT-TYPE SYNTAX INTEGER { dmOrderShortest (1), dmOrderOrdered (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the type of digit map order. The MGC can advise and load the gateway with a digit map that correspond to the dial plan to collect the access codes, credit card numbers and other numbers requested by call control services." REFERENCE "RFC2705, 2.1.5 Digit Maps" DEFVAL { dmOrderShortest } ::= { cxeCallCtrlConfigEntry 11 }
cxeCallCtrlDigitMapOrder OBJECT-TYPE SYNTAX INTEGER { dmOrderShortest (1), dmOrderOrdered (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the type of digit map order. The MGC can advise and load the gateway with a digit map that correspond to the dial plan to collect the access codes, credit card numbers and other numbers requested by call control services." REFERENCE "RFC2705, 2.1.5 Digit Maps" DEFVAL { dmOrderShortest } ::= { cxeCallCtrlConfigEntry 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.325.1.1.1.1.1 | cxeCallCtrlControlServiceType | 0 | 0 | This object identifies Type Of Service (TOS) field of IP header for the control packet in VoIP application. |
1.3.6.1.4.1.9.9.325.1.1.1.1.2 | cxeCallCtrlBearerServiceType | 0 | 0 | This object identifies Type Of Service (TOS) field of IP header for the voice payload packet in VoIP application. |
1.3.6.1.4.1.9.9.325.1.1.1.1.3 | cxeCallCtrlVoIpDtmfRelayMode | 0 | 0 | This object defines whether the DTMF (Dual Tone, Multi-Frequency) digits need to be transported to the other endpoint via NSE pac… |
1.3.6.1.4.1.9.9.325.1.1.1.1.4 | cxeCallCtrlVoIpDtmfCodec | 0 | 0 | This object identifies DTMF relay codec for VoIP. This object is not applicable if cxeCallCtrlVoIpDtmfRelay is DtmfRelayDisabled. |
1.3.6.1.4.1.9.9.325.1.1.1.1.5 | cxeCallCtrlVoAal2DtmfRelayMode | 0 | 0 | This object defines whether the DTMF (Dual Tone, Multi-Frequency) digits need to be transported to the other endpoint in Voice ov… |
1.3.6.1.4.1.9.9.325.1.1.1.1.6 | cxeCallCtrlVoAal2DtmfCodec | 0 | 0 | This object identifies DTMF relay CODEC for Voice over AAL2. This object is not applicable if cxeCallCtrlVoAal2DtmfRelay is DtmfR… |
1.3.6.1.4.1.9.9.325.1.1.1.1.7 | cxeCallCtrlTsePayload | 0 | 0 | This object identifies TSE (Telephony Signaling Events) payload type. |
1.3.6.1.4.1.9.9.325.1.1.1.1.8 | cxeCallCtrlNetNseTimer | 0 | 0 | This object identifies Network Signaling Event (NSE) timeout value. |
1.3.6.1.4.1.9.9.325.1.1.1.1.9 | cxeCallCtrlRtcpRcvTimer | 0 | 0 | This object identifies the number of times of Real Time Control Transport (RTCP) report interval if the media gateway has not rec… |
1.3.6.1.4.1.9.9.325.1.1.1.1.10 | cxeCallCtrlIgnoreAal2LcoCodec | 0 | 0 | This object defines whether to ignore the AAL2 Local Connection Option (LCO) message from the call agent or not. |
1.3.6.1.4.1.9.9.325.1.1.1.1.12 | cxeCallCtrlT38Inhibited | 0 | 0 | This object defines whether T.38 is inhibited in the media gateway or not. T.38 is a Fax Relay Protocol defined by ITU for real-ti… |
1.3.6.1.4.1.9.9.325.1.1.1.1.13 | cxeCallCtrlT38NseRspTimer | 0 | 0 | This object defines a timeout value for a timer. This timer is started after sending a NSE 200 while waiting for the NSE 201 ackn… |
1.3.6.1.4.1.9.9.325.1.1.1.1.14 | cxeCallCtrlT38FecEnabled | 0 | 0 | This object is used to enable the Forward Error Correction (FEC) for UDP-based fax transport. This object is not applicable if cx… |
1.3.6.1.4.1.9.9.325.1.1.1.1.15 | cxeCallCtrlT38LsRedundancy | 0 | 0 | This object determines the extent of the Internet Fax Protocol (IFP) packet transmission redundancy for the low-speed control inf… |
1.3.6.1.4.1.9.9.325.1.1.1.1.16 | cxeCallCtrlT38HsRedundancy | 0 | 0 | This object determines the extent of the Internet Fax Protocol (IFP) packet transmission redundancy for the high-speed control an… |
1.3.6.1.4.1.9.9.325.1.1.1.1.17 | cxeCallCtrlT38NsfCountryCode | 0 | 0 | This object specifies the country code for identifying the country where the media gateway with non-standard capabilities was man… |
1.3.6.1.4.1.9.9.325.1.1.1.1.18 | cxeCallCtrlT38NsfVendorCode | 0 | 0 | Per its definition (ITU T.35), the Vendor Code (also called the Terminal Provider Code) in the Non-Standard Facilities (NSF) code… |
1.3.6.1.4.1.9.9.325.1.1.1.1.19 | cxeCallCtrlVselDselFselSupport | 0 | 0 | This object is used to enable or disable VSEL, DSEL and FSEL support. VSEL: Voice codec, packet length and packet times Selection… |
1.3.6.1.4.1.9.9.325.1.1.1.1.20 | cxeCallCtrlDefaultBearTraffic | 0 | 0 | This object specifies the combination of the network type (IP/ATM), virtual circuit type (PVC/SVC) and ATM adaptation layer type … |
1.3.6.1.4.1.9.9.325.1.1.1.1.21 | cxeCallCtrlLastFailedMgcAddrType | 0 | 0 | This object indicates the address type, either IPv4 or IPv6, of cxeCallCtrlLastFailedMgcAddress. |
1.3.6.1.4.1.9.9.325.1.1.1.1.22 | cxeCallCtrlLastFailedMgcAddress | 0 | 0 | This object indicates the address of MGC (Media Gateway Controller) with which the media gateway had tried to communicate lastly … |