This object indicates the address type, either IPv4 or
IPv6, of cxeCallCtrlLastFailedMgcAddress.
Parsed from file CISCO-XGCP-EXT-MIB.mib
Module: CISCO-XGCP-EXT-MIB
This object indicates the address type, either IPv4 or
IPv6, of cxeCallCtrlLastFailedMgcAddress.
This object indicates the address type, either IPv4 or
IPv6, of cxeCallCtrlLastFailedMgcAddress.
Parsed from file CISCO-XGCP-EXT-MIB.my.txt
Company: None
Module: CISCO-XGCP-EXT-MIB
This object indicates the address type, either IPv4 or
IPv6, of cxeCallCtrlLastFailedMgcAddress.
cxeCallCtrlLastFailedMgcAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the address type, either IPv4 or IPv6, of cxeCallCtrlLastFailedMgcAddress. " ::= { cxeCallCtrlConfigEntry 21 }
cxeCallCtrlLastFailedMgcAddrType OBJECT-TYPE SYNTAX InetAddressType ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the address type, either IPv4 or IPv6, of cxeCallCtrlLastFailedMgcAddress. " ::= { cxeCallCtrlConfigEntry 21 }
Vendor: Cisco Systems
Module: CISCO-XGCP-EXT-MIB (CISCO-XGCP-EXT-MIB-V1SMI.my)
Type: TABULAR
Access: read-only
Syntax: InetAddressType
Automatically extracted from www.mibdepot.com
cxeCallCtrlLastFailedMgcAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the address type, either IPv4 or IPv6, of cxeCallCtrlLastFailedMgcAddress. " ::= { cxeCallCtrlConfigEntry 21 }
cxeCallCtrlLastFailedMgcAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the address type, either IPv4 or IPv6, of cxeCallCtrlLastFailedMgcAddress. " ::= { cxeCallCtrlConfigEntry 21 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.325.1.1.1.1.1 | cxeCallCtrlControlServiceType | 0 | 0 | This object identifies Type Of Service (TOS) field of IP header for the control packet in VoIP application. |
1.3.6.1.4.1.9.9.325.1.1.1.1.2 | cxeCallCtrlBearerServiceType | 0 | 0 | This object identifies Type Of Service (TOS) field of IP header for the voice payload packet in VoIP application. |
1.3.6.1.4.1.9.9.325.1.1.1.1.3 | cxeCallCtrlVoIpDtmfRelayMode | 0 | 0 | This object defines whether the DTMF (Dual Tone, Multi-Frequency) digits need to be transported to the other endpoint via NSE pac… |
1.3.6.1.4.1.9.9.325.1.1.1.1.4 | cxeCallCtrlVoIpDtmfCodec | 0 | 0 | This object identifies DTMF relay codec for VoIP. This object is not applicable if cxeCallCtrlVoIpDtmfRelay is DtmfRelayDisabled. |
1.3.6.1.4.1.9.9.325.1.1.1.1.5 | cxeCallCtrlVoAal2DtmfRelayMode | 0 | 0 | This object defines whether the DTMF (Dual Tone, Multi-Frequency) digits need to be transported to the other endpoint in Voice ov… |
1.3.6.1.4.1.9.9.325.1.1.1.1.6 | cxeCallCtrlVoAal2DtmfCodec | 0 | 0 | This object identifies DTMF relay CODEC for Voice over AAL2. This object is not applicable if cxeCallCtrlVoAal2DtmfRelay is DtmfR… |
1.3.6.1.4.1.9.9.325.1.1.1.1.7 | cxeCallCtrlTsePayload | 0 | 0 | This object identifies TSE (Telephony Signaling Events) payload type. |
1.3.6.1.4.1.9.9.325.1.1.1.1.8 | cxeCallCtrlNetNseTimer | 0 | 0 | This object identifies Network Signaling Event (NSE) timeout value. |
1.3.6.1.4.1.9.9.325.1.1.1.1.9 | cxeCallCtrlRtcpRcvTimer | 0 | 0 | This object identifies the number of times of Real Time Control Transport (RTCP) report interval if the media gateway has not rec… |
1.3.6.1.4.1.9.9.325.1.1.1.1.10 | cxeCallCtrlIgnoreAal2LcoCodec | 0 | 0 | This object defines whether to ignore the AAL2 Local Connection Option (LCO) message from the call agent or not. |
1.3.6.1.4.1.9.9.325.1.1.1.1.11 | cxeCallCtrlDigitMapOrder | 0 | 0 | This object defines the type of digit map order. The MGC can advise and load the gateway with a digit map that correspond to the … |
1.3.6.1.4.1.9.9.325.1.1.1.1.12 | cxeCallCtrlT38Inhibited | 0 | 0 | This object defines whether T.38 is inhibited in the media gateway or not. T.38 is a Fax Relay Protocol defined by ITU for real-ti… |
1.3.6.1.4.1.9.9.325.1.1.1.1.13 | cxeCallCtrlT38NseRspTimer | 0 | 0 | This object defines a timeout value for a timer. This timer is started after sending a NSE 200 while waiting for the NSE 201 ackn… |
1.3.6.1.4.1.9.9.325.1.1.1.1.14 | cxeCallCtrlT38FecEnabled | 0 | 0 | This object is used to enable the Forward Error Correction (FEC) for UDP-based fax transport. This object is not applicable if cx… |
1.3.6.1.4.1.9.9.325.1.1.1.1.15 | cxeCallCtrlT38LsRedundancy | 0 | 0 | This object determines the extent of the Internet Fax Protocol (IFP) packet transmission redundancy for the low-speed control inf… |
1.3.6.1.4.1.9.9.325.1.1.1.1.16 | cxeCallCtrlT38HsRedundancy | 0 | 0 | This object determines the extent of the Internet Fax Protocol (IFP) packet transmission redundancy for the high-speed control an… |
1.3.6.1.4.1.9.9.325.1.1.1.1.17 | cxeCallCtrlT38NsfCountryCode | 0 | 0 | This object specifies the country code for identifying the country where the media gateway with non-standard capabilities was man… |
1.3.6.1.4.1.9.9.325.1.1.1.1.18 | cxeCallCtrlT38NsfVendorCode | 0 | 0 | Per its definition (ITU T.35), the Vendor Code (also called the Terminal Provider Code) in the Non-Standard Facilities (NSF) code… |
1.3.6.1.4.1.9.9.325.1.1.1.1.19 | cxeCallCtrlVselDselFselSupport | 0 | 0 | This object is used to enable or disable VSEL, DSEL and FSEL support. VSEL: Voice codec, packet length and packet times Selection… |
1.3.6.1.4.1.9.9.325.1.1.1.1.20 | cxeCallCtrlDefaultBearTraffic | 0 | 0 | This object specifies the combination of the network type (IP/ATM), virtual circuit type (PVC/SVC) and ATM adaptation layer type … |
1.3.6.1.4.1.9.9.325.1.1.1.1.22 | cxeCallCtrlLastFailedMgcAddress | 0 | 0 | This object indicates the address of MGC (Media Gateway Controller) with which the media gateway had tried to communicate lastly … |