This object defines the amount of free memory a router must
have in order to configure RTR. If RTR found out that the
memory is falling below this mark, it will not allow new
probes to be configured.
This value should not be set higher (or very close to) than
the free bytes available on the router.
Parsed from file CISCO-RTTMON-MIB.mib
Module: CISCO-RTTMON-MIB
This object defines the amount of free memory a router must
have in order to configure RTR. If RTR found out that the
memory is falling below this mark, it will not allow new
probes to be configured.
This value should not be set higher (or very close to) than
the free bytes available on the router.
rttMonApplFreeMemLowWaterMark OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the amount of free memory a router must
have in order to configure RTR. If RTR found out that the
memory is falling below this mark, it will not allow new
probes to be configured.
This value should not be set higher (or very close to) than
the free bytes available on the router."
View at oid-info.com
This object defines the amount of free memory a router must
have in order to configure RTR. If RTR found out that the
memory is falling below this mark, it will not allow new
probes to be configured.
This value should not be set higher (or very close to) than
the free bytes available on the router.
Parsed from file cisco-rttmon.mib.txt
Company: None
Module: CISCO-RTTMON-MIB
This object defines the amount of free memory a router must
have in order to configure RTR. If RTR found out that the
memory is falling below this mark, it will not allow new
probes to be configured.
This value should not be set higher (or very close to) than
the free bytes available on the router.
rttMonApplFreeMemLowWaterMark OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the amount of free memory a router must have in order to configure RTR. If RTR found out that the memory is falling below this mark, it will not allow new probes to be configured. This value should not be set higher (or very close to) than the free bytes available on the router." ::= { rttMonAppl 11 }
rttMonApplFreeMemLowWaterMark OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the amount of free memory a router must have in order to configure RTR. If RTR found out that the memory is falling below this mark, it will not allow new probes to be configured. This value should not be set higher (or very close to) than the free bytes available on the router." ::= { rttMonAppl 11 }
Automatically extracted from Cisco "SNMP v2 MIBs".
rttMonApplFreeMemLowWaterMark OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the amount of free memory a router must have in order to configure RTR. If RTR found out that the memory is falling below this mark, it will not allow new probes to be configured. This value should not be set higher (or very close to) than the free bytes available on the router." ::= { rttMonAppl 11 }
rttMonApplFreeMemLowWaterMark OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the amount of free memory a router must have in order to configure RTR. If RTR found out that the memory is falling below this mark, it will not allow new probes to be configured. This value should not be set higher (or very close to) than the free bytes available on the router." ::= { rttMonAppl 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.42.1.1.11.0 | rttMonApplFreeMemLowWaterMark | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.42.1.1.1 | rttMonApplVersion | 1 | 1 | Round Trip Time monitoring application version string. The format will be: 'Version.Release.Patch-Level: Textual-Description' For e… |
| 1.3.6.1.4.1.9.9.42.1.1.2 | rttMonApplMaxPacketDataSize | 1 | 1 | The maximum size of the data portion an echo packet supported by this RTT application. This is the maximum value that can be spe… |
| 1.3.6.1.4.1.9.9.42.1.1.3 | rttMonApplTimeOfLastSet | 1 | 1 | The last time at which a set operation occurred on any of the objects in this MIB. The managing application can inspect this val… |
| 1.3.6.1.4.1.9.9.42.1.1.4 | rttMonApplNumCtrlAdminEntry | 1 | 1 | This object defines the maximum number of entries that can be added to the rttMonCtrlAdminTable. It is calculated at the system i… |
| 1.3.6.1.4.1.9.9.42.1.1.5 | rttMonApplReset | 1 | 1 | When set to 'reset' the entire RTT application goes through a reset sequence, making a best effort to revert to its startup condi… |
| 1.3.6.1.4.1.9.9.42.1.1.6 | rttMonApplPreConfigedReset | 1 | 1 | When set to 'reset' the RTT application will reset the Application Preconfigured MIB section. This will force the RTT application… |
| 1.3.6.1.4.1.9.9.42.1.1.7 | rttMonApplSupportedRttTypesTable | 1 | 3 | A table of which contains the supported Rtt Monitor Types. See the RttMonRttType textual convention for the definition of each typ… |
| 1.3.6.1.4.1.9.9.42.1.1.8 | rttMonApplSupportedProtocolsTable | 1 | 3 | A table of which contains the supported Rtt Monitor Protocols. See the RttMonProtocol textual convention for the definition of eac… |
| 1.3.6.1.4.1.9.9.42.1.1.9 | rttMonApplPreConfigedTable | 1 | 4 | A table of which contains the previously configured Script Names and File IO targets. These Script Names and File IO targets are … |
| 1.3.6.1.4.1.9.9.42.1.1.10 | rttMonApplProbeCapacity | 1 | 1 | rttMonApplProbeCapacity OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object def… |
| 1.3.6.1.4.1.9.9.42.1.1.12 | rttMonApplLatestSetError | 1 | 1 | An error description for the last error message caused by set. Currently, it includes set error caused due to setting rttMonApplFr… |
| 1.3.6.1.4.1.9.9.42.1.1.13 | rttMonApplResponder | 1 | 1 | Enable or disable RTR responder on the router. |
| 1.3.6.1.4.1.9.9.42.1.1.14 | rttMonApplAuthTable | 1 | 9 | A table which contains the definitions for key-strings that will be used in authenticating RTR Control Protocol. |
| 1.3.6.1.4.1.9.9.42.1.1.15 | rttMonApplLpdGrpStatsReset | 1 | 1 | This object is used to reset certain objects within the rttMonLpdGrpStatsTable. When the object is set to value of an active LPD… |