Enable or disable RTR responder on the router.
Parsed from file CISCO-RTTMON-MIB.mib
Module: CISCO-RTTMON-MIB
Enable or disable RTR responder on the router.
rttMonApplResponder OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RTR responder on the router."
View at oid-info.com
Enable or disable RTR responder on the router.
Parsed from file cisco-rttmon.mib.txt
Company: None
Module: CISCO-RTTMON-MIB
Enable or disable RTR responder on the router.
rttMonApplResponder OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable RTR responder on the router." ::= { rttMonAppl 13 }
rttMonApplResponder OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable RTR responder on the router." ::= { rttMonAppl 13 }
Automatically extracted from Cisco "SNMP v2 MIBs".
rttMonApplResponder OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable RTR responder on the router." ::= { rttMonAppl 13 }
rttMonApplResponder OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable RTR responder on the router." ::= { rttMonAppl 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.42.1.1.13.0 | rttMonApplResponder | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.42.1.1.1 | rttMonApplVersion | 1 | 1 | Round Trip Time monitoring application version string. The format will be: 'Version.Release.Patch-Level: Textual-Description' For e… |
| 1.3.6.1.4.1.9.9.42.1.1.2 | rttMonApplMaxPacketDataSize | 1 | 1 | The maximum size of the data portion an echo packet supported by this RTT application. This is the maximum value that can be spe… |
| 1.3.6.1.4.1.9.9.42.1.1.3 | rttMonApplTimeOfLastSet | 1 | 1 | The last time at which a set operation occurred on any of the objects in this MIB. The managing application can inspect this val… |
| 1.3.6.1.4.1.9.9.42.1.1.4 | rttMonApplNumCtrlAdminEntry | 1 | 1 | This object defines the maximum number of entries that can be added to the rttMonCtrlAdminTable. It is calculated at the system i… |
| 1.3.6.1.4.1.9.9.42.1.1.5 | rttMonApplReset | 1 | 1 | When set to 'reset' the entire RTT application goes through a reset sequence, making a best effort to revert to its startup condi… |
| 1.3.6.1.4.1.9.9.42.1.1.6 | rttMonApplPreConfigedReset | 1 | 1 | When set to 'reset' the RTT application will reset the Application Preconfigured MIB section. This will force the RTT application… |
| 1.3.6.1.4.1.9.9.42.1.1.7 | rttMonApplSupportedRttTypesTable | 1 | 3 | A table of which contains the supported Rtt Monitor Types. See the RttMonRttType textual convention for the definition of each typ… |
| 1.3.6.1.4.1.9.9.42.1.1.8 | rttMonApplSupportedProtocolsTable | 1 | 3 | A table of which contains the supported Rtt Monitor Protocols. See the RttMonProtocol textual convention for the definition of eac… |
| 1.3.6.1.4.1.9.9.42.1.1.9 | rttMonApplPreConfigedTable | 1 | 4 | A table of which contains the previously configured Script Names and File IO targets. These Script Names and File IO targets are … |
| 1.3.6.1.4.1.9.9.42.1.1.10 | rttMonApplProbeCapacity | 1 | 1 | rttMonApplProbeCapacity OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object def… |
| 1.3.6.1.4.1.9.9.42.1.1.11 | rttMonApplFreeMemLowWaterMark | 1 | 1 | This object defines the amount of free memory a router must have in order to configure RTR. If RTR found out that the memory is f… |
| 1.3.6.1.4.1.9.9.42.1.1.12 | rttMonApplLatestSetError | 1 | 1 | An error description for the last error message caused by set. Currently, it includes set error caused due to setting rttMonApplFr… |
| 1.3.6.1.4.1.9.9.42.1.1.14 | rttMonApplAuthTable | 1 | 9 | A table which contains the definitions for key-strings that will be used in authenticating RTR Control Protocol. |
| 1.3.6.1.4.1.9.9.42.1.1.15 | rttMonApplLpdGrpStatsReset | 1 | 1 | This object is used to reset certain objects within the rttMonLpdGrpStatsTable. When the object is set to value of an active LPD… |