A list of objects that define specific configuration for
RttMonRttType conceptual Rtt control rows.
Parsed from file CISCO-RTTMON-MIB.mib
Module: CISCO-RTTMON-MIB
A list of objects that define specific configuration for
RttMonRttType conceptual Rtt control rows.
rttMonEchoAdminEntry OBJECT-TYPE
SYNTAX RttMonEchoAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that define specific configuration for
RttMonRttType conceptual Rtt control rows."
INDEX { rttMonCtrlAdminIndex }
View at oid-info.com
A list of objects that define specific configuration for
RttMonRttType conceptual Rtt control rows.
Parsed from file cisco-rttmon.mib.txt
Company: None
Module: CISCO-RTTMON-MIB
A list of objects that define specific configuration for
RttMonRttType conceptual Rtt control rows.
rttMonEchoAdminEntry OBJECT-TYPE SYNTAX RttMonEchoAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of objects that define specific configuration for RttMonRttType conceptual Rtt control rows." INDEX { rttMonCtrlAdminIndex } ::= { rttMonEchoAdminTable 1 }
rttMonEchoAdminEntry OBJECT-TYPE SYNTAX RttMonEchoAdminEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of objects that define specific configuration for RttMonRttType conceptual Rtt control rows." INDEX { rttMonCtrlAdminIndex } ::= { rttMonEchoAdminTable 1 }
Automatically extracted from Cisco "SNMP v2 MIBs".
rttMonEchoAdminEntry OBJECT-TYPE SYNTAX RttMonEchoAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of objects that define specific configuration for RttMonRttType conceptual Rtt control rows." INDEX { rttMonCtrlAdminIndex } ::= { rttMonEchoAdminTable 1 }
rttMonEchoAdminEntry OBJECT-TYPE SYNTAX RttMonEchoAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of objects that define specific configuration for RttMonRttType conceptual Rtt control rows." INDEX { rttMonCtrlAdminIndex } ::= { rttMonEchoAdminTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.42.1.2.2.1.1 | rttMonEchoAdminProtocol | 0 | 0 | rttMonEchoAdminProtocol OBJECT-TYPE SYNTAX RttMonProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the prot… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.2 | rttMonEchoAdminTargetAddress | 0 | 0 | A string which specifies the address of the target. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.3 | rttMonEchoAdminPktDataRequestSize | 0 | 0 | This object represents the number of octets to be placed into the ARR Data portion of the request message, when using SNA protoco… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.4 | rttMonEchoAdminPktDataResponseSize | 0 | 0 | This object represents the number of octets to be placed into the ARR Data portion of the response message. This value is passed … |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.5 | rttMonEchoAdminTargetPort | 0 | 0 | This object represents the target's port number. This object is applicable to udpEcho, tcpConnect and jitter probes. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.6 | rttMonEchoAdminSourceAddress | 0 | 0 | A string which specifies the IP address of the source. This object is applicable to all probes except dns, dlsw and sna. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.7 | rttMonEchoAdminSourcePort | 0 | 0 | This object represents the source's port number. If this object is not specified, the application will get a port allocated by th… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.8 | rttMonEchoAdminControlEnable | 0 | 0 | If this object is enabled, then the RTR application will send control messages to a responder, residing on the target router to r… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.9 | rttMonEchoAdminTOS | 0 | 0 | This object represents the type of service octet in an IP header. This object is not applicable to dhcp and dns. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.10 | rttMonEchoAdminLSREnable | 0 | 0 | If this object is enabled then it means that the application calculates response time for a specific path, defined in rttMonEchoP… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.11 | rttMonEchoAdminTargetAddressString | 0 | 0 | A string which specifies the address of the target. This string can be in IP address format or a hostname. This object is applica… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.12 | rttMonEchoAdminNameServer | 0 | 0 | A string which specifies the ip address of the name-server. This object is applicable to dns probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.13 | rttMonEchoAdminOperation | 0 | 0 | A code that represents the specific type of RTT operation. This object is applicable to http and ftp probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.14 | rttMonEchoAdminHTTPVersion | 0 | 0 | A string which specifies the version number of the HTTP Server. The syntax for the version string is 1… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.15 | rttMonEchoAdminURL | 0 | 0 | A string which represents the URL to which a HTTP probe should communicate with. This object is applicable to http probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.16 | rttMonEchoAdminCache | 0 | 0 | If this object is false then it means that HTTP request should not download cached pages. This means that the request should be f… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.17 | rttMonEchoAdminInterval | 0 | 0 | This value represents the inter-packet delay between packets and is in milliseconds. This value is currently used for Jitter prob… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.18 | rttMonEchoAdminNumPackets | 0 | 0 | This value represents the number of packets that need to be transmitted. This value is currently used for Jitter probe. This obje… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.19 | rttMonEchoAdminProxy | 0 | 0 | This string represents the proxy server information. This object is applicable to http probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.20 | rttMonEchoAdminString1 | 0 | 0 | rttMonEchoAdminString1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "This string stores t… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.21 | rttMonEchoAdminString2 | 0 | 0 | This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used i… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.22 | rttMonEchoAdminString3 | 0 | 0 | This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used i… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.23 | rttMonEchoAdminString4 | 0 | 0 | This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used i… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.24 | rttMonEchoAdminString5 | 0 | 0 | This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used i… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.25 | rttMonEchoAdminMode | 0 | 0 | A code that represents the specific type of RTT operation. This object is applicable to ftp probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.26 | rttMonEchoAdminVrfName | 0 | 0 | This field is used to specify the VPN name in which the RTT operation will be used. For regular RTT operation this field should n… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.27 | rttMonEchoAdminCodecType | 0 | 0 | Specifies the codec type to be used with jitter probe. This is applicable only for the jitter probe. If codec-type is configured … |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.28 | rttMonEchoAdminCodecInterval | 0 | 0 | This field represents the inter-packet delay between packets and is in milliseconds. This object is applicable only to jitter pro… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.29 | rttMonEchoAdminCodecPayload | 0 | 0 | This object represents the number of octets that needs to be placed into the Data portion of the message. This value is used only… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.30 | rttMonEchoAdminCodecNumPackets | 0 | 0 | This value represents the number of packets that need to be transmitted. This value is used only for jitter probe which uses code… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.31 | rttMonEchoAdminICPIFAdvFactor | 0 | 0 | The advantage factor is dependant on the type of access and how the service is to be used. Conventional Wire-line 0 Mobility w… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.32 | rttMonEchoAdminLSPFECType | 0 | 0 | The type of the target FEC for the RTT 'echo' and 'pathEcho' operations based on 'mplsLspPingAppl' RttMonProtocol. ldpIpv4Prefix … |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.33 | rttMonEchoAdminLSPSelector | 0 | 0 | A string which specifies a valid 127/8 address. This address is of the form 127.x.y.z. This address is not used to route the MPLS… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.34 | rttMonEchoAdminLSPReplyMode | 0 | 0 | This object specifies the reply mode for the LSP Echo requests. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.35 | rttMonEchoAdminLSPTTL | 0 | 0 | This object represents the TTL setting for MPLS echo request packets. For ping operation this represents the TTL value to be set … |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.36 | rttMonEchoAdminLSPExp | 0 | 0 | This object represents the EXP value that needs to be put as precedence bit in the MPLS echo request IP header. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.37 | rttMonEchoAdminPrecision | 0 | 0 | This object specifies the accuracy of statistics that needs to be calculated milliseconds - The accuracy of stats will be of mill… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.38 | rttMonEchoAdminProbePakPriority | 0 | 0 | This object specifies the priority that will be assigned to probe packet. This value can be set only for jitter operation |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.39 | rttMonEchoAdminOWNTPSyncTolAbs | 0 | 0 | This object specifies the total clock synchronization error on source and responder that is considered acceptable for oneway meas… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.40 | rttMonEchoAdminOWNTPSyncTolPct | 0 | 0 | This object specifies the total clock synchronization error on source and responder that is considered acceptable for oneway meas… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.41 | rttMonEchoAdminOWNTPSyncTolType | 0 | 0 | This object specifies whether the value in specified for oneway NTP sync tolerance is absolute value or percent value |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.42 | rttMonEchoAdminCalledNumber | 0 | 0 | This string stores the called number of post dial delay. This object is applicable to voip post dial delay probe only. The number… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.43 | rttMonEchoAdminDetectPoint | 0 | 0 | A code that represents the detect point of post dial delay. This object is applicable to SAA post dial delay probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.44 | rttMonEchoAdminGKRegistration | 0 | 0 | A boolean that represents VoIP GK registration delay. This object is applicable to SAA GK registration delay probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.45 | rttMonEchoAdminSourceVoicePort | 0 | 0 | A string which specifies the voice-port on the source gateway. This object is applicable to RTP probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.46 | rttMonEchoAdminCallDuration | 0 | 0 | Duration of RTP session. This object is applicable to RTP probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.47 | rttMonEchoAdminLSPReplyDscp | 0 | 0 | This object specifies the DSCP value to be set in the IP header of the LSP echo reply packet. The value of this object will be in… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.48 | rttMonEchoAdminLSPNullShim | 0 | 0 | This object specifies if the explicit-null label is to be added to LSP echo requests which are sent while performing RTT operatio… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.49 | rttMonEchoAdminTargetMPID | 0 | 0 | This object specifies the destination maintenance point ID. It is only applicable to ethernetPing and ethernetJitter operation. I… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.50 | rttMonEchoAdminTargetDomainName | 0 | 0 | This object specifies the name of the domain in which the destination maintenance point lies. It is only applicable to ethernetPi… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.51 | rttMonEchoAdminTargetVLAN | 0 | 0 | This object specifies the ID of the VLAN in which the destination maintenance point lies. It is only applicable to ethernetPing a… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.52 | rttMonEchoAdminEthernetCOS | 0 | 0 | This object specifies the class of service in an Ethernet packet header. It is only applicable to ethernetPing and ethernetJitter… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.53 | rttMonEchoAdminLSPVccvID | 0 | 0 | This object specifies MPLS LSP pseudowire VCCV ID values between 1 to 2147483647. Note: This object cannot be set to value of 0. … |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.54 | rttMonEchoAdminTargetEVC | 0 | 0 | This object specifies the Ethernet Virtual Connection in which the destination maintenance point lies. It is only applicable to e… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.55 | rttMonEchoAdminTargetMEPPort | 0 | 0 | This object specifies that Port Level CFM testing towards an Outward/Down MEP will be used. It is only applicable to ethernetPing… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.56 | rttMonEchoAdminVideoTrafficProfile | 0 | 0 | A string which represents the profile name to which a video probe should use. This object is applicable to video probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.57 | rttMonEchoAdminDscp | 0 | 0 | This object represents the Differentiated Service Code Point (DSCP) QoS marking in the generated synthetic packets. Value - DiffS… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.58 | rttMonEchoAdminReserveDsp | 0 | 0 | This object represents the video traffic generation source. be : best effort using DSP but without reservation gs : guaranteed se… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.59 | rttMonEchoAdminInputInterface | 0 | 0 | This object represents the network input interface on the sender router where the synthetic packets are received from the emulate… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.60 | rttMonEchoAdminEmulateSourceAddress | 0 | 0 | This object specifies the IP address of the emulated source from which the synthetic packets would be generated. If this object i… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.61 | rttMonEchoAdminEmulateSourcePort | 0 | 0 | This object represents the port number of the emulated source from which the synthetic packets would be generated. If this object… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.62 | rttMonEchoAdminEmulateTargetAddress | 0 | 0 | This object specifies the IP address of the emulated target by which the synthetic packets would be received. If this object is n… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.63 | rttMonEchoAdminEmulateTargetPort | 0 | 0 | This object represents the port number of the emulated target by which the synthetic packets would be received. If this object is… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.64 | rttMonEchoAdminTargetMacAddress | 0 | 0 | This object indicates the MAC address of the target device. This object is only applicable for Y.1731 operations. rttMonEchoAdmin… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.65 | rttMonEchoAdminSourceMacAddress | 0 | 0 | This object indicates the MAC address of the source device. This object is only applicable for Y.1731 operations. rttMonEchoAdmin… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.66 | rttMonEchoAdminSourceMPID | 0 | 0 | This object indicates the source maintenance point ID. It is only applicable to Y.1731 operation. It will be set to zero for ot… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.67 | rttMonEchoAdminEndPointListName | 0 | 0 | This object specifies the name of endpoint list which a probe uses to generate operations. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.68 | rttMonEchoAdminSSM | 0 | 0 | This object specifies if Source Specific Multicast is to be added. This object is applicable to multicast probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.69 | rttMonEchoAdminControlRetry | 0 | 0 | This object specifies the maximum number of retries for control message. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.70 | rttMonEchoAdminControlTimeout | 0 | 0 | This object specifies the wait duration before control message timeout. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.71 | rttMonEchoAdminIgmpTreeInit | 0 | 0 | This object specifies number of packets to be sent for multicast tree setup. This object is applicable to multicast probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.72 | rttMonEchoAdminEnableBurst | 0 | 0 | This object indicates that packets will be sent in burst. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.73 | rttMonEchoAdminAggBurstCycles | 0 | 0 | This object indicates the number of burst cycles to be sent during the aggregate interval. This value is currently used for Y1731… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.74 | rttMonEchoAdminLossRatioNumFrames | 0 | 0 | This object indicates the number of frames over which to calculate the frame loss ratio. This object is applicable to Y1731 SLM p… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.75 | rttMonEchoAdminAvailNumFrames | 0 | 0 | This object indicates the number of frames over which to calculate the availability. This object is applicable to Y1731 SLM probe… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.76 | rttMonEchoAdminTstampOptimization | 0 | 0 | This object specifies whether timestamp optimization is enabled. When the value is 'true' then timestamp optimization is enabled. … |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.77 | rttMonEchoAdminTargetSwitchId | 0 | 0 | This object represents the destination Switch Id that needed to send one TRILL/FB OAM Loopback request. This object is applicable… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.78 | rttMonEchoAdminProfileId | 0 | 0 | This object represents the destination Profile Id that needed to send one TRILL/FB OAM Loopback request. This object is applicabl… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.79 | rttMonEchoAdminOutputInterface | 0 | 0 | This object represents the network interface on the sender router where the packets are transmitted from the emulated endpoint so… |