This object represents the port number of the emulated target
by which the synthetic packets would be received. If this object
is not specified, the emulated target port number will by
default be the same as rttMonEchoAdminTargetPort. This object is
applicable to video probes.
Parsed from file cisco-rttmon.mib.txt
Company: None
Module: CISCO-RTTMON-MIB
This object represents the port number of the emulated target
by which the synthetic packets would be received. If this object
is not specified, the emulated target port number will by
default be the same as rttMonEchoAdminTargetPort. This object is
applicable to video probes.
Vendor: Cisco
Module: CISCO-RTTMON-MIB
[Automatically extracted from oidview.com]
rttMonEchoAdminEmulateTargetPort OBJECT-TYPE SYNTAX Integer32 (0..65536) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the port number of the emulated target by which the synthetic packets would be received. If this object is not specified, the emulated target port number will by default be the same as rttMonEchoAdminTargetPort. This object is applicable to video probes." ::= { rttMonEchoAdminEntry 63 }
rttMonEchoAdminEmulateTargetPort OBJECT-TYPE SYNTAX Integer32 (0..65536) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the port number of the emulated target by which the synthetic packets would be received. If this object is not specified, the emulated target port number will by default be the same as rttMonEchoAdminTargetPort. This object is applicable to video probes." ::= { rttMonEchoAdminEntry 63 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.42.1.2.2.1.1 | rttMonEchoAdminProtocol | 0 | 0 | rttMonEchoAdminProtocol OBJECT-TYPE SYNTAX RttMonProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the prot… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.2 | rttMonEchoAdminTargetAddress | 0 | 0 | A string which specifies the address of the target. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.3 | rttMonEchoAdminPktDataRequestSize | 0 | 0 | This object represents the number of octets to be placed into the ARR Data portion of the request message, when using SNA protoco… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.4 | rttMonEchoAdminPktDataResponseSize | 0 | 0 | This object represents the number of octets to be placed into the ARR Data portion of the response message. This value is passed … |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.5 | rttMonEchoAdminTargetPort | 0 | 0 | This object represents the target's port number. This object is applicable to udpEcho, tcpConnect and jitter probes. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.6 | rttMonEchoAdminSourceAddress | 0 | 0 | A string which specifies the IP address of the source. This object is applicable to all probes except dns, dlsw and sna. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.7 | rttMonEchoAdminSourcePort | 0 | 0 | This object represents the source's port number. If this object is not specified, the application will get a port allocated by th… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.8 | rttMonEchoAdminControlEnable | 0 | 0 | If this object is enabled, then the RTR application will send control messages to a responder, residing on the target router to r… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.9 | rttMonEchoAdminTOS | 0 | 0 | This object represents the type of service octet in an IP header. This object is not applicable to dhcp and dns. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.10 | rttMonEchoAdminLSREnable | 0 | 0 | If this object is enabled then it means that the application calculates response time for a specific path, defined in rttMonEchoP… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.11 | rttMonEchoAdminTargetAddressString | 0 | 0 | A string which specifies the address of the target. This string can be in IP address format or a hostname. This object is applica… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.12 | rttMonEchoAdminNameServer | 0 | 0 | A string which specifies the ip address of the name-server. This object is applicable to dns probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.13 | rttMonEchoAdminOperation | 0 | 0 | A code that represents the specific type of RTT operation. This object is applicable to http and ftp probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.14 | rttMonEchoAdminHTTPVersion | 0 | 0 | A string which specifies the version number of the HTTP Server. The syntax for the version string is 1… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.15 | rttMonEchoAdminURL | 0 | 0 | A string which represents the URL to which a HTTP probe should communicate with. This object is applicable to http probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.16 | rttMonEchoAdminCache | 0 | 0 | If this object is false then it means that HTTP request should not download cached pages. This means that the request should be f… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.17 | rttMonEchoAdminInterval | 0 | 0 | This value represents the inter-packet delay between packets and is in milliseconds. This value is currently used for Jitter prob… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.18 | rttMonEchoAdminNumPackets | 0 | 0 | This value represents the number of packets that need to be transmitted. This value is currently used for Jitter probe. This obje… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.19 | rttMonEchoAdminProxy | 0 | 0 | This string represents the proxy server information. This object is applicable to http probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.20 | rttMonEchoAdminString1 | 0 | 0 | rttMonEchoAdminString1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "This string stores t… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.21 | rttMonEchoAdminString2 | 0 | 0 | This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used i… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.22 | rttMonEchoAdminString3 | 0 | 0 | This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used i… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.23 | rttMonEchoAdminString4 | 0 | 0 | This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used i… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.24 | rttMonEchoAdminString5 | 0 | 0 | This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used i… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.25 | rttMonEchoAdminMode | 0 | 0 | A code that represents the specific type of RTT operation. This object is applicable to ftp probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.26 | rttMonEchoAdminVrfName | 0 | 0 | This field is used to specify the VPN name in which the RTT operation will be used. For regular RTT operation this field should n… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.27 | rttMonEchoAdminCodecType | 0 | 0 | Specifies the codec type to be used with jitter probe. This is applicable only for the jitter probe. If codec-type is configured … |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.28 | rttMonEchoAdminCodecInterval | 0 | 0 | This field represents the inter-packet delay between packets and is in milliseconds. This object is applicable only to jitter pro… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.29 | rttMonEchoAdminCodecPayload | 0 | 0 | This object represents the number of octets that needs to be placed into the Data portion of the message. This value is used only… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.30 | rttMonEchoAdminCodecNumPackets | 0 | 0 | This value represents the number of packets that need to be transmitted. This value is used only for jitter probe which uses code… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.31 | rttMonEchoAdminICPIFAdvFactor | 0 | 0 | The advantage factor is dependant on the type of access and how the service is to be used. Conventional Wire-line 0 Mobility w… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.32 | rttMonEchoAdminLSPFECType | 0 | 0 | The type of the target FEC for the RTT 'echo' and 'pathEcho' operations based on 'mplsLspPingAppl' RttMonProtocol. ldpIpv4Prefix … |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.33 | rttMonEchoAdminLSPSelector | 0 | 0 | A string which specifies a valid 127/8 address. This address is of the form 127.x.y.z. This address is not used to route the MPLS… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.34 | rttMonEchoAdminLSPReplyMode | 0 | 0 | This object specifies the reply mode for the LSP Echo requests. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.35 | rttMonEchoAdminLSPTTL | 0 | 0 | This object represents the TTL setting for MPLS echo request packets. For ping operation this represents the TTL value to be set … |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.36 | rttMonEchoAdminLSPExp | 0 | 0 | This object represents the EXP value that needs to be put as precedence bit in the MPLS echo request IP header. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.37 | rttMonEchoAdminPrecision | 0 | 0 | This object specifies the accuracy of statistics that needs to be calculated milliseconds - The accuracy of stats will be of mill… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.38 | rttMonEchoAdminProbePakPriority | 0 | 0 | This object specifies the priority that will be assigned to probe packet. This value can be set only for jitter operation |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.39 | rttMonEchoAdminOWNTPSyncTolAbs | 0 | 0 | This object specifies the total clock synchronization error on source and responder that is considered acceptable for oneway meas… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.40 | rttMonEchoAdminOWNTPSyncTolPct | 0 | 0 | This object specifies the total clock synchronization error on source and responder that is considered acceptable for oneway meas… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.41 | rttMonEchoAdminOWNTPSyncTolType | 0 | 0 | This object specifies whether the value in specified for oneway NTP sync tolerance is absolute value or percent value |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.42 | rttMonEchoAdminCalledNumber | 0 | 0 | This string stores the called number of post dial delay. This object is applicable to voip post dial delay probe only. The number… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.43 | rttMonEchoAdminDetectPoint | 0 | 0 | A code that represents the detect point of post dial delay. This object is applicable to SAA post dial delay probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.44 | rttMonEchoAdminGKRegistration | 0 | 0 | A boolean that represents VoIP GK registration delay. This object is applicable to SAA GK registration delay probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.45 | rttMonEchoAdminSourceVoicePort | 0 | 0 | A string which specifies the voice-port on the source gateway. This object is applicable to RTP probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.46 | rttMonEchoAdminCallDuration | 0 | 0 | Duration of RTP session. This object is applicable to RTP probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.47 | rttMonEchoAdminLSPReplyDscp | 0 | 0 | This object specifies the DSCP value to be set in the IP header of the LSP echo reply packet. The value of this object will be in… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.48 | rttMonEchoAdminLSPNullShim | 0 | 0 | This object specifies if the explicit-null label is to be added to LSP echo requests which are sent while performing RTT operatio… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.49 | rttMonEchoAdminTargetMPID | 0 | 0 | This object specifies the destination maintenance point ID. It is only applicable to ethernetPing and ethernetJitter operation. I… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.50 | rttMonEchoAdminTargetDomainName | 0 | 0 | This object specifies the name of the domain in which the destination maintenance point lies. It is only applicable to ethernetPi… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.51 | rttMonEchoAdminTargetVLAN | 0 | 0 | This object specifies the ID of the VLAN in which the destination maintenance point lies. It is only applicable to ethernetPing a… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.52 | rttMonEchoAdminEthernetCOS | 0 | 0 | This object specifies the class of service in an Ethernet packet header. It is only applicable to ethernetPing and ethernetJitter… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.53 | rttMonEchoAdminLSPVccvID | 0 | 0 | This object specifies MPLS LSP pseudowire VCCV ID values between 1 to 2147483647. Note: This object cannot be set to value of 0. … |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.54 | rttMonEchoAdminTargetEVC | 0 | 0 | This object specifies the Ethernet Virtual Connection in which the destination maintenance point lies. It is only applicable to e… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.55 | rttMonEchoAdminTargetMEPPort | 0 | 0 | This object specifies that Port Level CFM testing towards an Outward/Down MEP will be used. It is only applicable to ethernetPing… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.56 | rttMonEchoAdminVideoTrafficProfile | 0 | 0 | A string which represents the profile name to which a video probe should use. This object is applicable to video probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.57 | rttMonEchoAdminDscp | 0 | 0 | This object represents the Differentiated Service Code Point (DSCP) QoS marking in the generated synthetic packets. Value - DiffS… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.58 | rttMonEchoAdminReserveDsp | 0 | 0 | This object represents the video traffic generation source. be : best effort using DSP but without reservation gs : guaranteed se… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.59 | rttMonEchoAdminInputInterface | 0 | 0 | This object represents the network input interface on the sender router where the synthetic packets are received from the emulate… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.60 | rttMonEchoAdminEmulateSourceAddress | 0 | 0 | This object specifies the IP address of the emulated source from which the synthetic packets would be generated. If this object i… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.61 | rttMonEchoAdminEmulateSourcePort | 0 | 0 | This object represents the port number of the emulated source from which the synthetic packets would be generated. If this object… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.62 | rttMonEchoAdminEmulateTargetAddress | 0 | 0 | This object specifies the IP address of the emulated target by which the synthetic packets would be received. If this object is n… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.64 | rttMonEchoAdminTargetMacAddress | 0 | 0 | This object indicates the MAC address of the target device. This object is only applicable for Y.1731 operations. rttMonEchoAdmin… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.65 | rttMonEchoAdminSourceMacAddress | 0 | 0 | This object indicates the MAC address of the source device. This object is only applicable for Y.1731 operations. rttMonEchoAdmin… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.66 | rttMonEchoAdminSourceMPID | 0 | 0 | This object indicates the source maintenance point ID. It is only applicable to Y.1731 operation. It will be set to zero for ot… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.67 | rttMonEchoAdminEndPointListName | 0 | 0 | This object specifies the name of endpoint list which a probe uses to generate operations. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.68 | rttMonEchoAdminSSM | 0 | 0 | This object specifies if Source Specific Multicast is to be added. This object is applicable to multicast probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.69 | rttMonEchoAdminControlRetry | 0 | 0 | This object specifies the maximum number of retries for control message. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.70 | rttMonEchoAdminControlTimeout | 0 | 0 | This object specifies the wait duration before control message timeout. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.71 | rttMonEchoAdminIgmpTreeInit | 0 | 0 | This object specifies number of packets to be sent for multicast tree setup. This object is applicable to multicast probe only. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.72 | rttMonEchoAdminEnableBurst | 0 | 0 | This object indicates that packets will be sent in burst. |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.73 | rttMonEchoAdminAggBurstCycles | 0 | 0 | This object indicates the number of burst cycles to be sent during the aggregate interval. This value is currently used for Y1731… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.74 | rttMonEchoAdminLossRatioNumFrames | 0 | 0 | This object indicates the number of frames over which to calculate the frame loss ratio. This object is applicable to Y1731 SLM p… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.75 | rttMonEchoAdminAvailNumFrames | 0 | 0 | This object indicates the number of frames over which to calculate the availability. This object is applicable to Y1731 SLM probe… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.76 | rttMonEchoAdminTstampOptimization | 0 | 0 | This object specifies whether timestamp optimization is enabled. When the value is 'true' then timestamp optimization is enabled. … |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.77 | rttMonEchoAdminTargetSwitchId | 0 | 0 | This object represents the destination Switch Id that needed to send one TRILL/FB OAM Loopback request. This object is applicable… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.78 | rttMonEchoAdminProfileId | 0 | 0 | This object represents the destination Profile Id that needed to send one TRILL/FB OAM Loopback request. This object is applicabl… |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.79 | rttMonEchoAdminOutputInterface | 0 | 0 | This object represents the network interface on the sender router where the packets are transmitted from the emulated endpoint so… |