The status of the last IP network discovery command
operation.
success (1) - IP network discovery operation completed
successfully.
none (2) - no IP network discovery operation is
performed.
inProgress (3) - discovery operation is in progress.
noGigEInterfaceIndexSpecified (4)
- 'ifIndex' of the gigabit eithernet interface
is not specified, i.e., the value of
'cIpNetworkGigEInterfaceToDiscover' object
is set to '0'.
noGigEInetAddrSpecified (5)
- InetAddress of the gigabit eithernet
interface is not specified, i.e., the
value of
'cIpNetworkpGigEInetAddrToDiscover' object
is set to '0'.
noGigESwitchWWNSpecified (6)
- The Switch WWN of the gigabit eithernet
interface is not specified, i.e., the value
of 'cIpNetworkGigESwitchWWNToDiscover'
object is set to '0'.
invalidGigEInterfaceIndex (7)
- 'ifIndex' of the gigabit ethernet interface
specified in the
'cIpNetworkGigEInterfaceToDiscover' object
is not valid.
invalidGigEInetAddrType (8)
- 'InetAddrType' of the gigabit ethernet
interface specified in the
'cIpNetworkGigEInetAddrType' object
is not valid.
invalidGigEInetAddr (9)
- 'InetAddr' of the gigabit ethernet
interface specified in the
'cIpNetworkGigEInetAddr' object
is not valid.
generalFailure (10)- General IP network discovery operation
Failure.
Parsed from file CISCO-IP-NW-DISCOVERY-MIB.mib
Module: CISCO-IP-NW-DISCOVERY-MIB
The status of the last IP network discovery command
operation.
success (1) - IP network discovery operation completed
successfully.
none (2) - no IP network discovery operation is
performed.
inProgress (3) - discovery operation is in progress.
noGigEInterfaceIndexSpecified (4)
- 'ifIndex' of the gigabit eithernet interface
is not specified, i.e., the value of
'cIpNetworkGigEInterfaceToDiscover' object
is set to '0'.
noGigEInetAddrSpecified (5)
- InetAddress of the gigabit eithernet
interface is not specified, i.e., the
value of
'cIpNetworkpGigEInetAddrToDiscover' object
is set to '0'.
noGigESwitchWWNSpecified (6)
- The Switch WWN of the gigabit eithernet
interface is not specified, i.e., the value
of 'cIpNetworkGigESwitchWWNToDiscover'
object is set to '0'.
invalidGigEInterfaceIndex (7)
- 'ifIndex' of the gigabit ethernet interface
specified in the
'cIpNetworkGigEInterfaceToDiscover' object
is not valid.
invalidGigEInetAddrType (8)
- 'InetAddrType' of the gigabit ethernet
interface specified in the
'cIpNetworkGigEInetAddrType' object
is not valid.
invalidGigEInetAddr (9)
- 'InetAddr' of the gigabit ethernet
interface specified in the
'cIpNetworkGigEInetAddr' object
is not valid.
generalFailure (10)- General IP network discovery operation
Failure.
The status of the last IP network discovery command
operation.
success (1) - IP network discovery operation completed
successfully.
none (2) - no IP network discovery operation is
performed.
inProgress (3) - discovery operation is in progress.
noGigEInterfaceIndexSpecified (4)
- 'ifIndex' of the gigabit eithernet interface
is not specified, i.e., the value of
'cIpNetworkGigEInterfaceToDiscover' object
is set to '0'.
noGigEInetAddrSpecified (5)
- InetAddress of the gigabit eithernet
interface is not specified, i.e., the
value of
'cIpNetworkpGigEInetAddrToDiscover' object
is set to '0'.
noGigESwitchWWNSpecified (6)
- The Switch WWN of the gigabit eithernet
interface is not specified, i.e., the value
of 'cIpNetworkGigESwitchWWNToDiscover'
object is set to '0'.
invalidGigEInterfaceIndex (7)
- 'ifIndex' of the gigabit ethernet interface
specified in the
'cIpNetworkGigEInterfaceToDiscover' object
is not valid.
invalidGigEInetAddrType (8)
- 'InetAddrType' of the gigabit ethernet
interface specified in the
'cIpNetworkGigEInetAddrType' object
is not valid.
invalidGigEInetAddr (9)
- 'InetAddr' of the gigabit ethernet
interface specified in the
'cIpNetworkGigEInetAddr' object
is not valid.
generalFailure (10)- General IP network discovery operation
Failure.
Parsed from file CISCO-IP-NW-DISCOVERY-MIB.my.txt
Company: None
Module: CISCO-IP-NW-DISCOVERY-MIB
The status of the last IP network discovery command
operation.
success (1) - IP network discovery operation completed
successfully.
none (2) - no IP network discovery operation is
performed.
inProgress (3) - discovery operation is in progress.
noGigEInterfaceIndexSpecified (4)
- 'ifIndex' of the gigabit eithernet interface
is not specified, i.e., the value of
'cIpNetworkGigEInterfaceToDiscover' object
is set to '0'.
noGigEInetAddrSpecified (5)
- InetAddress of the gigabit eithernet
interface is not specified, i.e., the
value of
'cIpNetworkpGigEInetAddrToDiscover' object
is set to '0'.
noGigESwitchWWNSpecified (6)
- The Switch WWN of the gigabit eithernet
interface is not specified, i.e., the value
of 'cIpNetworkGigESwitchWWNToDiscover'
object is set to '0'.
invalidGigEInterfaceIndex (7)
- 'ifIndex' of the gigabit ethernet interface
specified in the
'cIpNetworkGigEInterfaceToDiscover' object
is not valid.
invalidGigEInetAddrType (8)
- 'InetAddrType' of the gigabit ethernet
interface specified in the
'cIpNetworkGigEInetAddrType' object
is not valid.
invalidGigEInetAddr (9)
- 'InetAddr' of the gigabit ethernet
interface specified in the
'cIpNetworkGigEInetAddr' object
is not valid.
generalFailure (10)- General IP network discovery operation
Failure.
cIpNetworkDiscoveryCmdStatus OBJECT-TYPE SYNTAX INTEGER { success(1), none(2), inProgress(3), noGigEInterfaceIndexSpecified(4), noGigEInetAddrSpecified(5), noGigESwitchWWNSpecified(6), invalidGigEInterfaceIndex(7), invalidGigEInetAddrType(8), invalidGigEInetAddr(9), generalFailure(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the last IP network discovery command operation. success (1) - IP network discovery operation completed successfully. none (2) - no IP network discovery operation is performed. inProgress (3) - discovery operation is in progress. noGigEInterfaceIndexSpecified (4) - 'ifIndex' of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkGigEInterfaceToDiscover' object is set to '0'. noGigEInetAddrSpecified (5) - InetAddress of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkpGigEInetAddrToDiscover' object is set to '0'. noGigESwitchWWNSpecified (6) - The Switch WWN of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkGigESwitchWWNToDiscover' object is set to '0'. invalidGigEInterfaceIndex (7) - 'ifIndex' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInterfaceToDiscover' object is not valid. invalidGigEInetAddrType (8) - 'InetAddrType' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInetAddrType' object is not valid. invalidGigEInetAddr (9) - 'InetAddr' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInetAddr' object is not valid. generalFailure (10)- General IP network discovery operation Failure." ::= { cIpNetworkDiscoveryConfig 11 }
cIpNetworkDiscoveryCmdStatus OBJECT-TYPE SYNTAX INTEGER { success(1), none(2), inProgress(3), noGigEInterfaceIndexSpecified(4), noGigEInetAddrSpecified(5), noGigESwitchWWNSpecified(6), invalidGigEInterfaceIndex(7), invalidGigEInetAddrType(8), invalidGigEInetAddr(9), generalFailure(10) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the last IP network discovery command operation. success (1) - IP network discovery operation completed successfully. none (2) - no IP network discovery operation is performed. inProgress (3) - discovery operation is in progress. noGigEInterfaceIndexSpecified (4) - 'ifIndex' of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkGigEInterfaceToDiscover' object is set to '0'. noGigEInetAddrSpecified (5) - InetAddress of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkpGigEInetAddrToDiscover' object is set to '0'. noGigESwitchWWNSpecified (6) - The Switch WWN of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkGigESwitchWWNToDiscover' object is set to '0'. invalidGigEInterfaceIndex (7) - 'ifIndex' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInterfaceToDiscover' object is not valid. invalidGigEInetAddrType (8) - 'InetAddrType' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInetAddrType' object is not valid. invalidGigEInetAddr (9) - 'InetAddr' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInetAddr' object is not valid. generalFailure (10)- General IP network discovery operation Failure." ::= { cIpNetworkDiscoveryConfig 11 }
Vendor: Cisco
Module: CISCO-IP-NW-DISCOVERY-MIB
[Automatically extracted from oidview.com]
cIpNetworkDiscoveryCmdStatus OBJECT-TYPE SYNTAX INTEGER { success(1), none(2), inProgress(3), noGigEInterfaceIndexSpecified(4), noGigEInetAddrSpecified(5), noGigESwitchWWNSpecified(6), invalidGigEInterfaceIndex(7), invalidGigEInetAddrType(8), invalidGigEInetAddr(9), generalFailure(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the last IP network discovery command operation. success (1) - IP network discovery operation completed successfully. none (2) - no IP network discovery operation is performed. inProgress (3) - discovery operation is in progress. noGigEInterfaceIndexSpecified (4) - 'ifIndex' of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkGigEInterfaceToDiscover' object is set to '0'. noGigEInetAddrSpecified (5) - InetAddress of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkpGigEInetAddrToDiscover' object is set to '0'. noGigESwitchWWNSpecified (6) - The Switch WWN of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkGigESwitchWWNToDiscover' object is set to '0'. invalidGigEInterfaceIndex (7) - 'ifIndex' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInterfaceToDiscover' object is not valid. invalidGigEInetAddrType (8) - 'InetAddrType' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInetAddrType' object is not valid. invalidGigEInetAddr (9) - 'InetAddr' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInetAddr' object is not valid. generalFailure (10)- General IP network discovery operation Failure." ::= { cIpNetworkDiscoveryConfig 11 }
cIpNetworkDiscoveryCmdStatus OBJECT-TYPE SYNTAX INTEGER { success(1), none(2), inProgress(3), noGigEInterfaceIndexSpecified(4), noGigEInetAddrSpecified(5), noGigESwitchWWNSpecified(6), invalidGigEInterfaceIndex(7), invalidGigEInetAddrType(8), invalidGigEInetAddr(9), generalFailure(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the last IP network discovery command operation. success (1) - IP network discovery operation completed successfully. none (2) - no IP network discovery operation is performed. inProgress (3) - discovery operation is in progress. noGigEInterfaceIndexSpecified (4) - 'ifIndex' of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkGigEInterfaceToDiscover' object is set to '0'. noGigEInetAddrSpecified (5) - InetAddress of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkpGigEInetAddrToDiscover' object is set to '0'. noGigESwitchWWNSpecified (6) - The Switch WWN of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkGigESwitchWWNToDiscover' object is set to '0'. invalidGigEInterfaceIndex (7) - 'ifIndex' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInterfaceToDiscover' object is not valid. invalidGigEInetAddrType (8) - 'InetAddrType' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInetAddrType' object is not valid. invalidGigEInetAddr (9) - 'InetAddr' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInetAddr' object is not valid. generalFailure (10)- General IP network discovery operation Failure." ::= { cIpNetworkDiscoveryConfig 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.434.1.1.11.0 | cIpNetworkDiscoveryCmdStatus | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.434.1.1.1 | cIpNetworkAutomaticDiscovery, ciscoIsnsIpNetAutomaticDiscovery | 1 | 1 | This object indicates whether the automatic discovery to find the reachability on the IP networks is enabled or not in the system… |
1.3.6.1.4.1.9.9.434.1.1.2 | cIpNetworkDiscoveryDelay, ciscoIsnsIpNetDiscoveryInterval | 1 | 1 | This object indicates the time duration between successive automatic discovery run for the IP networks, from the iSNS server. |
1.3.6.1.4.1.9.9.434.1.1.3 | cIpNetworkDiscoveryTypeSpinLock, ciscoIsnsIpNetTable | 2 | 5 | Represents the list of all the IP networks connected to the gigabit ethernet interfaces in the fabric. |
1.3.6.1.4.1.9.9.434.1.1.4 | cIpNetworkDiscoveryType, ciscoIsnsIpNetInterfaceTable | 2 | 5 | This object indicates type of discovery packets to be sent for carrying out the IP network discovery. |
1.3.6.1.4.1.9.9.434.1.1.5 | cIpNetworkDiscoveryPort | 1 | 1 | This object indicates TCP/UDP port used for of IP network discovery operation, if the cIpNetworkDiscoveryType object is set to 't… |
1.3.6.1.4.1.9.9.434.1.1.6 | cIpNetworkDiscoverySpinLock | 1 | 1 | This object is used to facilitate modification of cIpNetworkGigEIfIndexToDiscover, cIpNetworkInetAddrTypeToDiscover, cIpNetworkGig… |
1.3.6.1.4.1.9.9.434.1.1.7 | cIpNetworkGigEIfIndexToDiscover | 1 | 1 | This object represents the 'ifIndex' of the specified gigabit ethernet interface for which the IP network discovery needs to be d… |
1.3.6.1.4.1.9.9.434.1.1.8 | cIpNetworkInetAddrTypeToDiscover | 1 | 1 | This object represents the 'InetAddressType' of the address of the Gigabit ethernet port on which to perform the discovery. This o… |
1.3.6.1.4.1.9.9.434.1.1.9 | cIpNetworkGigEInetAddrToDiscover | 1 | 1 | This object represents the 'InetAddress' of the specified gigabit ethernet interface specified in the 'cIpNetworkGigEIfIndexToDis… |
1.3.6.1.4.1.9.9.434.1.1.10 | cIpNetworkDiscoveryCommand | 1 | 1 | The IP network discovery command to be executed. Command Remarks all Run IP network discovery for … |