This object is used to facilitate modification of
cIpNetworkGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover
and cIpNetworkDiscoveryCommand objects by multiple
managers.
The procedure for modifying the above four objects are
as follows:
1. For interface specific discovery, determine the new
values for cIpNwGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover objects.
2. Retrieve the value of 'cIpNetworkDiscoverySpinLock'
object.
3. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value, and (in the same PDU)
the value of 'cIpNetworkGigEIfIndexToDiscover' to
the new value. If the set fails for the
'cIpNetworkDiscoverySpinLock' object, go back to
step 2.
4. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by one, and
(in the same PDU) the value of
'cIpNetworkInetAddrTypeToDiscover' object to the
new value.
5. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by two,
and (in the same PDU) the value of
'cIpNetworkGigEInetAddrToDiscover' object to the
new value.
If the set fails for 'cIpNetworkDiscoverySpinLock'
object go back to step 2.
6. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by four, and
(in the same PDU) the value of
'cIpNetworkDiscoveryCommand' object to
'interfaceSpecific'.
If the set fails for 'cIpNetworkDiscoverySpinLock'
object go back to step 2.
Note that if it's possible to include
'cIpNetworkGigEInetAddrToDiscover' and/or
'cIpNetworkDiscoveryCommand' object in the
(Set Request) PDU of an earlier step, then step 4 (or) 5
(or) 6 can be eliminated.
Parsed from file CISCO-IP-NW-DISCOVERY-MIB.mib
Module: CISCO-IP-NW-DISCOVERY-MIB
This object is used to facilitate modification of
cIpNetworkGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover
and cIpNetworkDiscoveryCommand objects by multiple
managers.
The procedure for modifying the above four objects are
as follows:
1. For interface specific discovery, determine the new
values for cIpNwGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover objects.
2. Retrieve the value of 'cIpNetworkDiscoverySpinLock'
object.
3. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value, and (in the same PDU)
the value of 'cIpNetworkGigEIfIndexToDiscover' to
the new value. If the set fails for the
'cIpNetworkDiscoverySpinLock' object, go back to
step 2.
4. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by one, and
(in the same PDU) the value of
'cIpNetworkInetAddrTypeToDiscover' object to the
new value.
5. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by two,
and (in the same PDU) the value of
'cIpNetworkGigEInetAddrToDiscover' object to the
new value.
If the set fails for 'cIpNetworkDiscoverySpinLock'
object go back to step 2.
6. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by four, and
(in the same PDU) the value of
'cIpNetworkDiscoveryCommand' object to
'interfaceSpecific'.
If the set fails for 'cIpNetworkDiscoverySpinLock'
object go back to step 2.
Note that if it's possible to include
'cIpNetworkGigEInetAddrToDiscover' and/or
'cIpNetworkDiscoveryCommand' object in the
(Set Request) PDU of an earlier step, then step 4 (or) 5
(or) 6 can be eliminated.
This object is used to facilitate modification of
cIpNetworkGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover
and cIpNetworkDiscoveryCommand objects by multiple
managers.
The procedure for modifying the above four objects are
as follows:
1. For interface specific discovery, determine the new
values for cIpNwGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover objects.
2. Retrieve the value of 'cIpNetworkDiscoverySpinLock'
object.
3. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value, and (in the same PDU)
the value of 'cIpNetworkGigEIfIndexToDiscover' to
the new value. If the set fails for the
'cIpNetworkDiscoverySpinLock' object, go back to
step 2.
4. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by one, and
(in the same PDU) the value of
'cIpNetworkInetAddrTypeToDiscover' object to the
new value.
5. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by two,
and (in the same PDU) the value of
'cIpNetworkGigEInetAddrToDiscover' object to the
new value.
If the set fails for 'cIpNetworkDiscoverySpinLock'
object go back to step 2.
6. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by four, and
(in the same PDU) the value of
'cIpNetworkDiscoveryCommand' object to
'interfaceSpecific'.
If the set fails for 'cIpNetworkDiscoverySpinLock'
object go back to step 2.
Note that if it's possible to include
'cIpNetworkGigEInetAddrToDiscover' and/or
'cIpNetworkDiscoveryCommand' object in the
(Set Request) PDU of an earlier step, then step 4 (or) 5
(or) 6 can be eliminated.
Parsed from file CISCO-IP-NW-DISCOVERY-MIB.my.txt
Company: None
Module: CISCO-IP-NW-DISCOVERY-MIB
This object is used to facilitate modification of
cIpNetworkGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover
and cIpNetworkDiscoveryCommand objects by multiple
managers.
The procedure for modifying the above four objects are
as follows:
1. For interface specific discovery, determine the new
values for cIpNwGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover objects.
2. Retrieve the value of 'cIpNetworkDiscoverySpinLock'
object.
3. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value, and (in the same PDU)
the value of 'cIpNetworkGigEIfIndexToDiscover' to
the new value. If the set fails for the
'cIpNetworkDiscoverySpinLock' object, go back to
step 2.
4. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by one, and
(in the same PDU) the value of
'cIpNetworkInetAddrTypeToDiscover' object to the
new value.
5. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by two,
and (in the same PDU) the value of
'cIpNetworkGigEInetAddrToDiscover' object to the
new value.
If the set fails for 'cIpNetworkDiscoverySpinLock'
object go back to step 2.
6. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by four, and
(in the same PDU) the value of
'cIpNetworkDiscoveryCommand' object to
'interfaceSpecific'.
If the set fails for 'cIpNetworkDiscoverySpinLock'
object go back to step 2.
Note that if it's possible to include
'cIpNetworkGigEInetAddrToDiscover' and/or
'cIpNetworkDiscoveryCommand' object in the
(Set Request) PDU of an earlier step, then step 4 (or) 5
(or) 6 can be eliminated.
cIpNetworkDiscoverySpinLock OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to facilitate modification of cIpNetworkGigEIfIndexToDiscover, cIpNetworkInetAddrTypeToDiscover, cIpNetworkGigEInetAddrToDiscover and cIpNetworkDiscoveryCommand objects by multiple managers. The procedure for modifying the above four objects are as follows: 1. For interface specific discovery, determine the new values for cIpNwGigEIfIndexToDiscover, cIpNetworkInetAddrTypeToDiscover, cIpNetworkGigEInetAddrToDiscover objects. 2. Retrieve the value of 'cIpNetworkDiscoverySpinLock' object. 3. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value, and (in the same PDU) the value of 'cIpNetworkGigEIfIndexToDiscover' to the new value. If the set fails for the 'cIpNetworkDiscoverySpinLock' object, go back to step 2. 4. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value incremented by one, and (in the same PDU) the value of 'cIpNetworkInetAddrTypeToDiscover' object to the new value. 5. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value incremented by two, and (in the same PDU) the value of 'cIpNetworkGigEInetAddrToDiscover' object to the new value. If the set fails for 'cIpNetworkDiscoverySpinLock' object go back to step 2. 6. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value incremented by four, and (in the same PDU) the value of 'cIpNetworkDiscoveryCommand' object to 'interfaceSpecific'. If the set fails for 'cIpNetworkDiscoverySpinLock' object go back to step 2. Note that if it's possible to include 'cIpNetworkGigEInetAddrToDiscover' and/or 'cIpNetworkDiscoveryCommand' object in the (Set Request) PDU of an earlier step, then step 4 (or) 5 (or) 6 can be eliminated." ::= { cIpNetworkDiscoveryConfig 6 }
cIpNetworkDiscoverySpinLock OBJECT-TYPE SYNTAX TestAndIncr ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to facilitate modification of cIpNetworkGigEIfIndexToDiscover, cIpNetworkInetAddrTypeToDiscover, cIpNetworkGigEInetAddrToDiscover and cIpNetworkDiscoveryCommand objects by multiple managers. The procedure for modifying the above four objects are as follows: 1. For interface specific discovery, determine the new values for cIpNwGigEIfIndexToDiscover, cIpNetworkInetAddrTypeToDiscover, cIpNetworkGigEInetAddrToDiscover objects. 2. Retrieve the value of 'cIpNetworkDiscoverySpinLock' object. 3. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value, and (in the same PDU) the value of 'cIpNetworkGigEIfIndexToDiscover' to the new value. If the set fails for the 'cIpNetworkDiscoverySpinLock' object, go back to step 2. 4. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value incremented by one, and (in the same PDU) the value of 'cIpNetworkInetAddrTypeToDiscover' object to the new value. 5. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value incremented by two, and (in the same PDU) the value of 'cIpNetworkGigEInetAddrToDiscover' object to the new value. If the set fails for 'cIpNetworkDiscoverySpinLock' object go back to step 2. 6. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value incremented by four, and (in the same PDU) the value of 'cIpNetworkDiscoveryCommand' object to 'interfaceSpecific'. If the set fails for 'cIpNetworkDiscoverySpinLock' object go back to step 2. Note that if it's possible to include 'cIpNetworkGigEInetAddrToDiscover' and/or 'cIpNetworkDiscoveryCommand' object in the (Set Request) PDU of an earlier step, then step 4 (or) 5 (or) 6 can be eliminated." ::= { cIpNetworkDiscoveryConfig 6 }
Vendor: Cisco
Module: CISCO-IP-NW-DISCOVERY-MIB
[Automatically extracted from oidview.com]
cIpNetworkDiscoverySpinLock OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to facilitate modification of cIpNetworkGigEIfIndexToDiscover, cIpNetworkInetAddrTypeToDiscover, cIpNetworkGigEInetAddrToDiscover and cIpNetworkDiscoveryCommand objects by multiple managers. The procedure for modifying the above four objects are as follows: 1. For interface specific discovery, determine the new values for cIpNwGigEIfIndexToDiscover, cIpNetworkInetAddrTypeToDiscover, cIpNetworkGigEInetAddrToDiscover objects. 2. Retrieve the value of 'cIpNetworkDiscoverySpinLock' object. 3. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value, and (in the same PDU) the value of 'cIpNetworkGigEIfIndexToDiscover' to the new value. If the set fails for the 'cIpNetworkDiscoverySpinLock' object, go back to step 2. 4. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value incremented by one, and (in the same PDU) the value of 'cIpNetworkInetAddrTypeToDiscover' object to the new value. 5. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value incremented by two, and (in the same PDU) the value of 'cIpNetworkGigEInetAddrToDiscover' object to the new value. If the set fails for 'cIpNetworkDiscoverySpinLock' object go back to step 2. 6. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value incremented by four, and (in the same PDU) the value of 'cIpNetworkDiscoveryCommand' object to 'interfaceSpecific'. If the set fails for 'cIpNetworkDiscoverySpinLock' object go back to step 2. Note that if it's possible to include 'cIpNetworkGigEInetAddrToDiscover' and/or 'cIpNetworkDiscoveryCommand' object in the (Set Request) PDU of an earlier step, then step 4 (or) 5 (or) 6 can be eliminated." ::= { cIpNetworkDiscoveryConfig 6 }
cIpNetworkDiscoverySpinLock OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to facilitate modification of cIpNetworkGigEIfIndexToDiscover, cIpNetworkInetAddrTypeToDiscover, cIpNetworkGigEInetAddrToDiscover and cIpNetworkDiscoveryCommand objects by multiple managers. The procedure for modifying the above four objects are as follows: 1. For interface specific discovery, determine the new values for cIpNwGigEIfIndexToDiscover, cIpNetworkInetAddrTypeToDiscover, cIpNetworkGigEInetAddrToDiscover objects. 2. Retrieve the value of 'cIpNetworkDiscoverySpinLock' object. 3. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value, and (in the same PDU) the value of 'cIpNetworkGigEIfIndexToDiscover' to the new value. If the set fails for the 'cIpNetworkDiscoverySpinLock' object, go back to step 2. 4. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value incremented by one, and (in the same PDU) the value of 'cIpNetworkInetAddrTypeToDiscover' object to the new value. 5. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value incremented by two, and (in the same PDU) the value of 'cIpNetworkGigEInetAddrToDiscover' object to the new value. If the set fails for 'cIpNetworkDiscoverySpinLock' object go back to step 2. 6. Set the value of 'cIpNetworkDiscoverySpinLock' object to the retrieved value incremented by four, and (in the same PDU) the value of 'cIpNetworkDiscoveryCommand' object to 'interfaceSpecific'. If the set fails for 'cIpNetworkDiscoverySpinLock' object go back to step 2. Note that if it's possible to include 'cIpNetworkGigEInetAddrToDiscover' and/or 'cIpNetworkDiscoveryCommand' object in the (Set Request) PDU of an earlier step, then step 4 (or) 5 (or) 6 can be eliminated." ::= { cIpNetworkDiscoveryConfig 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.434.1.1.6.0 | cIpNetworkDiscoverySpinLock | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.434.1.1.1 | cIpNetworkAutomaticDiscovery, ciscoIsnsIpNetAutomaticDiscovery | 1 | 1 | This object indicates whether the automatic discovery to find the reachability on the IP networks is enabled or not in the system… |
1.3.6.1.4.1.9.9.434.1.1.2 | cIpNetworkDiscoveryDelay, ciscoIsnsIpNetDiscoveryInterval | 1 | 1 | This object indicates the time duration between successive automatic discovery run for the IP networks, from the iSNS server. |
1.3.6.1.4.1.9.9.434.1.1.3 | cIpNetworkDiscoveryTypeSpinLock, ciscoIsnsIpNetTable | 2 | 5 | Represents the list of all the IP networks connected to the gigabit ethernet interfaces in the fabric. |
1.3.6.1.4.1.9.9.434.1.1.4 | cIpNetworkDiscoveryType, ciscoIsnsIpNetInterfaceTable | 2 | 5 | This object indicates type of discovery packets to be sent for carrying out the IP network discovery. |
1.3.6.1.4.1.9.9.434.1.1.5 | cIpNetworkDiscoveryPort | 1 | 1 | This object indicates TCP/UDP port used for of IP network discovery operation, if the cIpNetworkDiscoveryType object is set to 't… |
1.3.6.1.4.1.9.9.434.1.1.7 | cIpNetworkGigEIfIndexToDiscover | 1 | 1 | This object represents the 'ifIndex' of the specified gigabit ethernet interface for which the IP network discovery needs to be d… |
1.3.6.1.4.1.9.9.434.1.1.8 | cIpNetworkInetAddrTypeToDiscover | 1 | 1 | This object represents the 'InetAddressType' of the address of the Gigabit ethernet port on which to perform the discovery. This o… |
1.3.6.1.4.1.9.9.434.1.1.9 | cIpNetworkGigEInetAddrToDiscover | 1 | 1 | This object represents the 'InetAddress' of the specified gigabit ethernet interface specified in the 'cIpNetworkGigEIfIndexToDis… |
1.3.6.1.4.1.9.9.434.1.1.10 | cIpNetworkDiscoveryCommand | 1 | 1 | The IP network discovery command to be executed. Command Remarks all Run IP network discovery for … |
1.3.6.1.4.1.9.9.434.1.1.11 | cIpNetworkDiscoveryCmdStatus | 1 | 1 | The status of the last IP network discovery command operation. success (1) - IP network discovery operation completed successfully… |