This object indicates the power committed to the POE devices
connected to the switch.
Parsed from file CISCO-STACKWISE-MIB.mib
Module: CISCO-STACKWISE-MIB
This object indicates the power committed to the POE devices
connected to the switch.
This object indicates the power committed to the POE devices
connected to the switch.
Parsed from file CISCO-STACKWISE-MIB.my.txt
Company: None
Module: CISCO-STACKWISE-MIB
This object indicates the power committed to the POE devices
connected to the switch.
cswSwitchPowerCommited OBJECT-TYPE SYNTAX Unsigned32 UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the power committed to the POE devices connected to the switch." ::= { cswSwitchInfoEntry 10 }
cswSwitchPowerCommited OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the power committed to the POE devices connected to the switch." ::= { cswSwitchInfoEntry 10 }
Vendor: Cisco
Module: CISCO-STACKWISE-MIB
[Automatically extracted from oidview.com]
cswSwitchPowerCommited OBJECT-TYPE SYNTAX Unsigned32 UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the power committed to the POE devices connected to the switch." ::= { cswSwitchInfoEntry 10 }
cswSwitchPowerCommited OBJECT-TYPE SYNTAX Unsigned32 UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the power committed to the POE devices connected to the switch." ::= { cswSwitchInfoEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.500.1.2.1.1.1 | cswSwitchNumCurrent | 0 | 0 | This object contains the current switch identification number. This number should match any logical labeling on the switch. For e… |
| 1.3.6.1.4.1.9.9.500.1.2.1.1.2 | cswSwitchNumNextReload | 0 | 0 | This object contains the cswSwitchNumCurrent to be used at next reload. The maximum value for this object is defined by the cswM… |
| 1.3.6.1.4.1.9.9.500.1.2.1.1.3 | cswSwitchRole | 0 | 0 | This object describes the function of the switch: master - stack master. member - active member of the stack. notMember - no… |
| 1.3.6.1.4.1.9.9.500.1.2.1.1.4 | cswSwitchSwPriority | 0 | 0 | A number containing the priority of a switch. The switch with the highest priority will become the master. The maximum value fo… |
| 1.3.6.1.4.1.9.9.500.1.2.1.1.5 | cswSwitchHwPriority | 0 | 0 | This object contains the hardware priority of a switch. If two or more entries in this table have the same cswSwitchSwPriority v… |
| 1.3.6.1.4.1.9.9.500.1.2.1.1.6 | cswSwitchState | 0 | 0 | The current state of a switch: waiting - Waiting for a limited time on other switches in the stack to come online. progres… |
| 1.3.6.1.4.1.9.9.500.1.2.1.1.7 | cswSwitchMacAddress | 0 | 0 | The MAC address of the switch. Note: This object will contain the value of 0000:0000:0000 if the cswSwitchState value is other th… |
| 1.3.6.1.4.1.9.9.500.1.2.1.1.8 | cswSwitchSoftwareImage | 0 | 0 | The software image type running on the switch. Note: This object will contain an empty string if the cswSwitchState value is othe… |
| 1.3.6.1.4.1.9.9.500.1.2.1.1.9 | cswSwitchPowerBudget | 0 | 0 | This object indicates the power budget of the switch. |
| 1.3.6.1.4.1.9.9.500.1.2.1.1.11 | cswSwitchSystemPowerPriority | 0 | 0 | This specifies the system's power priority. In case of a power failure then the system with the highest system priority will be b… |
| 1.3.6.1.4.1.9.9.500.1.2.1.1.12 | cswSwitchPoeDevicesLowPriority | 0 | 0 | This object specifies the priority of the system's low priority POE devices. |
| 1.3.6.1.4.1.9.9.500.1.2.1.1.13 | cswSwitchPoeDevicesHighPriority | 0 | 0 | This object specifies the priority of the system's high priority POE devices. In order to avoid losing the high priority POE devi… |
| 1.3.6.1.4.1.9.9.500.1.2.1.1.14 | cswSwitchPowerAllocated | 0 | 0 | This object indicates the power committed to the POE devices connected to the switch. |