Total number of Continuity Check messages transmitted.
Total number of Continuity Check messages transmitted.
Parsed from file IEEE8021-CFM-MIB.my.txt
Company: None
Module: IEEE8021-CFM-MIB
Total number of Continuity Check messages transmitted.
cdot1agMepCciSentCcms OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Continuity Check messages transmitted." REFERENCE "802.1ag clauses 12.14.7.1.3:w and 20.10.2" ::= { cdot1agMepEntry 18 }
Vendor: Cisco Systems
Module: IEEE8021-CFM-MIB (CISCO-IEEE-CFM-MIB-V1SMI.my)
Type: TABULAR
Access: read-only
Syntax: Counter
Automatically extracted from www.mibdepot.com
cdot1agMepCciSentCcms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Continuity Check messages transmitted." REFERENCE "802.1ag clauses 12.14.7.1.3:w and 20.10.2" ::= { cdot1agMepEntry 18 }
cdot1agMepCciSentCcms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Continuity Check messages transmitted." REFERENCE "802.1ag clauses 12.14.7.1.3:w and 20.10.2" ::= { cdot1agMepEntry 18 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.604.1.7.1.1.1 | cdot1agMepIdentifier | 0 | 0 | Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance A… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.2 | cdot1agMepIfIndex | 0 | 0 | This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, … |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.3 | cdot1agMepDirection | 0 | 0 | The direction in which the MEP faces on the Bridge port. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.4 | cdot1agMepPrimaryVid | 0 | 0 | An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that ei… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.5 | cdot1agMepActive | 0 | 0 | Administrative state of the MEP A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to funct… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.6 | cdot1agMepFngState | 0 | 0 | Current state of the MEP Fault Notification Generator State Machine. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.7 | cdot1agMepCciEnabled | 0 | 0 | If set to true, the MEP will generate CCM messages. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.8 | cdot1agMepCcmLtmPriority | 0 | 0 | The priority value for CCMs and LTMs transmitted by the MEP. Default Value in the highest priority value allowed to pass through … |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.9 | cdot1agMepMacAddress | 0 | 0 | MAC address of the MEP. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.10 | cdot1agMepLowPrDef | 0 | 0 | An integer value specifying the lowest priority defect that is allowed to generate fault alarm. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.11 | cdot1agMepFngAlarmTime | 0 | 0 | The time that defects must be present before a Fault Alarm is issued (fngAlarmTime. 20.33.3) (default 2.5s). |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.12 | cdot1agMepFngResetTime | 0 | 0 | The time that defects must be absent before re-enabling a Fault Alarm (fngResetTime, 20.33.4) (default 10s). |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.13 | cdot1agMepHighestPrDefect | 0 | 0 | The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_R… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.14 | cdot1agMepDefects | 0 | 0 | A vector of Boolean error conditions from Table 20-1, any of which may be true: DefRDICCM(0) DefMACstatus(1) DefRemoteCCM(2) DefErro… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.15 | cdot1agMepErrorCcmLastFailure | 0 | 0 | The last-received CCM that triggered an DefErrorCCM fault. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.16 | cdot1agMepXconCcmLastFailure | 0 | 0 | The last-received CCM that triggered a DefXconCCM fault. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.17 | cdot1agMepCcmSequenceErrors | 0 | 0 | The total number of out-of-sequence CCMs received from all remote MEPs. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.19 | cdot1agMepNextLbmTransId | 0 | 0 | Next sequence number/transaction identifier to be sent in a Loopback message. This sequence number can be zero because it wraps a… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.20 | cdot1agMepLbrIn | 0 | 0 | Total number of valid, in-order Loopback Replies received. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.21 | cdot1agMepLbrInOutOfOrder | 0 | 0 | The total number of valid, out-of-order Loopback Replies received. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.22 | cdot1agMepLbrBadMsdu | 0 | 0 | (optional) The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corres… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.23 | cdot1agMepLtmNextSeqNumber | 0 | 0 | Next transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps … |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.24 | cdot1agMepUnexpLtrIn | 0 | 0 | The total number of unexpected LTRs received (20.39.1). |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.25 | cdot1agMepLbrOut | 0 | 0 | Total number of Loopback Replies transmitted. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.26 | cdot1agMepTransmitLbmStatus | 0 | 0 | A Boolean flag set to true by the bridge port to indicate that another LBM may be transmitted. Reset to false by the MEP Loopback… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.27 | cdot1agMepTransmitLbmDestMacAddress | 0 | 0 | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the … |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.28 | cdot1agMepTransmitLbmDestMepId | 0 | 0 | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sen… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.29 | cdot1agMepTransmitLbmDestIsMepId | 0 | 0 | True indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC addre… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.30 | cdot1agMepTransmitLbmMessages | 0 | 0 | The number of Loopback messages to be transmitted. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.31 | cdot1agMepTransmitLbmDataTlv | 0 | 0 | An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.32 | cdot1agMepTransmitLbmVlanPriority | 0 | 0 | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is CCM priority. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.33 | cdot1agMepTransmitLbmVlanDropEnable | 0 | 0 | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enabl… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.34 | cdot1agMepTransmitLbmResultOK | 0 | 0 | Indicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback … |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.35 | cdot1agMepTransmitLbmSeqNumber | 0 | 0 | The Loopback Transaction Identifier (cdot1agMepNextLbmTransId) of the first LBM (to be) sent. The value returned is undefined if c… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.36 | cdot1agMepTransmitLtmStatus | 0 | 0 | A Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted. Reset to false by the MEP Linktrac… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.37 | cdot1agMepTransmitLtmFlags | 0 | 0 | The flags field for LTMs transmitted by the MEP. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.38 | cdot1agMepTransmitLtmTargetMacAddress | 0 | 0 | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the … |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.39 | cdot1agMepTransmitLtmTargetMepId | 0 | 0 | An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP i… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.40 | cdot1agMepTransmitLtmTargetIsMepId | 0 | 0 | True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC addr… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.41 | cdot1agMepTransmitLtmTtl | 0 | 0 | The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decr… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.42 | cdot1agMepTransmitLtmResult | 0 | 0 | Indicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Messag… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.43 | cdot1agMepTransmitLtmSeqNumber | 0 | 0 | The LTM Transaction Identifier (cdot1agMepLtmNextSeqNumber) of the LTM sent. The value returned is undefined if cdot1agMepTransmit… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.44 | cdot1agMepTransmitLtmEgressIdentifier | 0 | 0 | Identifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM. The low-orde… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.45 | cdot1agMepRowStatus | 0 | 0 | The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value… |