An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
cdot1agMepTransmitLtmTargetIsMepId is 'true'.
An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
cdot1agMepTransmitLtmTargetIsMepId is 'true'.
Parsed from file IEEE8021-CFM-MIB.my.txt
Company: None
Module: IEEE8021-CFM-MIB
An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
cdot1agMepTransmitLtmTargetIsMepId is 'true'.
cdot1agMepTransmitLtmTargetMepId OBJECT-TYPE SYNTAX Cdot1agMepIdOrZero ACCESS read-write STATUS mandatory DESCRIPTION "An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column cdot1agMepTransmitLtmTargetIsMepId is 'true'." REFERENCE "802.1ag clause 12.14.7.4.2:c" ::= { cdot1agMepEntry 39 }
Vendor: Cisco Systems
Module: IEEE8021-CFM-MIB (CISCO-IEEE-CFM-MIB-V1SMI.my)
Type: TABULAR
Access: read-write
Syntax: Cdot1agMepIdOrZero
Automatically extracted from www.mibdepot.com
cdot1agMepTransmitLtmTargetMepId OBJECT-TYPE SYNTAX Cdot1agMepIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column cdot1agMepTransmitLtmTargetIsMepId is 'true'. " REFERENCE "802.1ag clause 12.14.7.4.2:c" ::= { cdot1agMepEntry 39 }
cdot1agMepTransmitLtmTargetMepId OBJECT-TYPE SYNTAX Cdot1agMepIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column cdot1agMepTransmitLtmTargetIsMepId is 'true'. " REFERENCE "802.1ag clause 12.14.7.4.2:c" ::= { cdot1agMepEntry 39 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.604.1.7.1.1.1 | cdot1agMepIdentifier | 0 | 0 | Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance A… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.2 | cdot1agMepIfIndex | 0 | 0 | This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, … |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.3 | cdot1agMepDirection | 0 | 0 | The direction in which the MEP faces on the Bridge port. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.4 | cdot1agMepPrimaryVid | 0 | 0 | An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that ei… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.5 | cdot1agMepActive | 0 | 0 | Administrative state of the MEP A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to funct… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.6 | cdot1agMepFngState | 0 | 0 | Current state of the MEP Fault Notification Generator State Machine. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.7 | cdot1agMepCciEnabled | 0 | 0 | If set to true, the MEP will generate CCM messages. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.8 | cdot1agMepCcmLtmPriority | 0 | 0 | The priority value for CCMs and LTMs transmitted by the MEP. Default Value in the highest priority value allowed to pass through … |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.9 | cdot1agMepMacAddress | 0 | 0 | MAC address of the MEP. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.10 | cdot1agMepLowPrDef | 0 | 0 | An integer value specifying the lowest priority defect that is allowed to generate fault alarm. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.11 | cdot1agMepFngAlarmTime | 0 | 0 | The time that defects must be present before a Fault Alarm is issued (fngAlarmTime. 20.33.3) (default 2.5s). |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.12 | cdot1agMepFngResetTime | 0 | 0 | The time that defects must be absent before re-enabling a Fault Alarm (fngResetTime, 20.33.4) (default 10s). |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.13 | cdot1agMepHighestPrDefect | 0 | 0 | The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_R… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.14 | cdot1agMepDefects | 0 | 0 | A vector of Boolean error conditions from Table 20-1, any of which may be true: DefRDICCM(0) DefMACstatus(1) DefRemoteCCM(2) DefErro… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.15 | cdot1agMepErrorCcmLastFailure | 0 | 0 | The last-received CCM that triggered an DefErrorCCM fault. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.16 | cdot1agMepXconCcmLastFailure | 0 | 0 | The last-received CCM that triggered a DefXconCCM fault. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.17 | cdot1agMepCcmSequenceErrors | 0 | 0 | The total number of out-of-sequence CCMs received from all remote MEPs. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.18 | cdot1agMepCciSentCcms | 0 | 0 | Total number of Continuity Check messages transmitted. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.19 | cdot1agMepNextLbmTransId | 0 | 0 | Next sequence number/transaction identifier to be sent in a Loopback message. This sequence number can be zero because it wraps a… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.20 | cdot1agMepLbrIn | 0 | 0 | Total number of valid, in-order Loopback Replies received. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.21 | cdot1agMepLbrInOutOfOrder | 0 | 0 | The total number of valid, out-of-order Loopback Replies received. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.22 | cdot1agMepLbrBadMsdu | 0 | 0 | (optional) The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corres… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.23 | cdot1agMepLtmNextSeqNumber | 0 | 0 | Next transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps … |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.24 | cdot1agMepUnexpLtrIn | 0 | 0 | The total number of unexpected LTRs received (20.39.1). |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.25 | cdot1agMepLbrOut | 0 | 0 | Total number of Loopback Replies transmitted. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.26 | cdot1agMepTransmitLbmStatus | 0 | 0 | A Boolean flag set to true by the bridge port to indicate that another LBM may be transmitted. Reset to false by the MEP Loopback… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.27 | cdot1agMepTransmitLbmDestMacAddress | 0 | 0 | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the … |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.28 | cdot1agMepTransmitLbmDestMepId | 0 | 0 | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sen… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.29 | cdot1agMepTransmitLbmDestIsMepId | 0 | 0 | True indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC addre… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.30 | cdot1agMepTransmitLbmMessages | 0 | 0 | The number of Loopback messages to be transmitted. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.31 | cdot1agMepTransmitLbmDataTlv | 0 | 0 | An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.32 | cdot1agMepTransmitLbmVlanPriority | 0 | 0 | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is CCM priority. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.33 | cdot1agMepTransmitLbmVlanDropEnable | 0 | 0 | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enabl… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.34 | cdot1agMepTransmitLbmResultOK | 0 | 0 | Indicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback … |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.35 | cdot1agMepTransmitLbmSeqNumber | 0 | 0 | The Loopback Transaction Identifier (cdot1agMepNextLbmTransId) of the first LBM (to be) sent. The value returned is undefined if c… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.36 | cdot1agMepTransmitLtmStatus | 0 | 0 | A Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted. Reset to false by the MEP Linktrac… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.37 | cdot1agMepTransmitLtmFlags | 0 | 0 | The flags field for LTMs transmitted by the MEP. |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.38 | cdot1agMepTransmitLtmTargetMacAddress | 0 | 0 | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the … |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.40 | cdot1agMepTransmitLtmTargetIsMepId | 0 | 0 | True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC addr… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.41 | cdot1agMepTransmitLtmTtl | 0 | 0 | The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decr… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.42 | cdot1agMepTransmitLtmResult | 0 | 0 | Indicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Messag… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.43 | cdot1agMepTransmitLtmSeqNumber | 0 | 0 | The LTM Transaction Identifier (cdot1agMepLtmNextSeqNumber) of the LTM sent. The value returned is undefined if cdot1agMepTransmit… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.44 | cdot1agMepTransmitLtmEgressIdentifier | 0 | 0 | Identifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM. The low-orde… |
| 1.3.6.1.4.1.9.9.604.1.7.1.1.45 | cdot1agMepRowStatus | 0 | 0 | The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value… |