A row entry representing an IPSLA UDP jitter template.
Parsed from file CISCO-IPSLA-JITTER-MIB.mib
Module: CISCO-IPSLA-JITTER-MIB
A row entry representing an IPSLA UDP jitter template.
A row entry representing an IPSLA UDP jitter template.
Parsed from file CISCO-IPSLA-JITTER-MIB.my.txt
Company: None
Module: CISCO-IPSLA-JITTER-MIB
A row entry representing an IPSLA UDP jitter template.
cipslaUdpJitterTmplEntry OBJECT-TYPE SYNTAX CipslaUdpJitterTmplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row entry representing an IPSLA UDP jitter template." INDEX { cipslaUdpJitterTmplName } ::= { cipslaUdpJitterTmplTable 1 }
cipslaUdpJitterTmplEntry OBJECT-TYPE SYNTAX CipslaUdpJitterTmplEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row entry representing an IPSLA UDP jitter template." INDEX { cipslaUdpJitterTmplName } ::= { cipslaUdpJitterTmplTable 1 }
Vendor: Cisco
Module: CISCO-IPSLA-JITTER-MIB
[Automatically extracted from oidview.com]
cipslaUdpJitterTmplEntry OBJECT-TYPE SYNTAX CipslaUdpJitterTmplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row entry representing an IPSLA UDP jitter template." INDEX { cipslaUdpJitterTmplName } ::= { cipslaUdpJitterTmplTable 1 }
cipslaUdpJitterTmplEntry OBJECT-TYPE SYNTAX CipslaUdpJitterTmplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row entry representing an IPSLA UDP jitter template." INDEX { cipslaUdpJitterTmplName } ::= { cipslaUdpJitterTmplTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.635.1.1.1.1 | cipslaUdpJitterTmplName | 0 | 0 | A string which specifies the UDP Jitter template name. |
| 1.3.6.1.4.1.9.9.635.1.1.1.2 | cipslaUdpJitterTmplDescription | 0 | 0 | A string which provides description of UDP Jitter template. |
| 1.3.6.1.4.1.9.9.635.1.1.1.3 | cipslaUdpJitterTmplControlEnable | 0 | 0 | If this object is enabled, then the IP SLA application will send control messages to a responder, residing on the target router t… |
| 1.3.6.1.4.1.9.9.635.1.1.1.4 | cipslaUdpJitterTmplTimeOut | 0 | 0 | Specifies the duration to wait for a IP SLA operation completion. For connection oriented protocols, this may cause the connection… |
| 1.3.6.1.4.1.9.9.635.1.1.1.5 | cipslaUdpJitterTmplVerifyData | 0 | 0 | When set to true, the resulting data in each IP SLA operation is compared with the expected data. This includes checking header … |
| 1.3.6.1.4.1.9.9.635.1.1.1.6 | cipslaUdpJitterTmplCodecType | 0 | 0 | Specifies the codec type to be used with UDP jitter operation. If codec-type is configured the following parameters cannot be con… |
| 1.3.6.1.4.1.9.9.635.1.1.1.7 | cipslaUdpJitterTmplCodecInterval | 0 | 0 | This field represents the inter-packet delay between packets and is in milliseconds. This object is applicable only to UDP jitter… |
| 1.3.6.1.4.1.9.9.635.1.1.1.8 | cipslaUdpJitterTmplCodecPayload | 0 | 0 | This object represents the number of octets that needs to be placed into the Data portion of the message. This value is used only… |
| 1.3.6.1.4.1.9.9.635.1.1.1.9 | cipslaUdpJitterTmplCodecNumPkts | 0 | 0 | This value represents the number of packets that need to be transmitted. This value is used only for UDP jitter operation which u… |
| 1.3.6.1.4.1.9.9.635.1.1.1.10 | cipslaUdpJitterTmplInterval | 0 | 0 | This value represents the inter-packet delay between packets and is in milliseconds. |
| 1.3.6.1.4.1.9.9.635.1.1.1.11 | cipslaUdpJitterTmplNumPkts | 0 | 0 | This value represents the number of packets that need to be transmitted. |
| 1.3.6.1.4.1.9.9.635.1.1.1.12 | cipslaUdpJitterTmplSrcAddrType | 0 | 0 | An enumerated value which specifies the IP address type of the source. It must be used along with the cipslaUdpJitterTmplSrcAddr … |
| 1.3.6.1.4.1.9.9.635.1.1.1.13 | cipslaUdpJitterTmplSrcAddr | 0 | 0 | This field specifies the IP address of the source. |
| 1.3.6.1.4.1.9.9.635.1.1.1.14 | cipslaUdpJitterTmplSrcPort | 0 | 0 | This object represents the source's port number. If this object is not specified, the application will get a port allocated by th… |
| 1.3.6.1.4.1.9.9.635.1.1.1.15 | cipslaUdpJitterTmplPrecision | 0 | 0 | This object specifies the accuracy of jitter statistics in rttMonJitterStatsTable that needs to be calculated. milliseconds(1) - … |
| 1.3.6.1.4.1.9.9.635.1.1.1.16 | cipslaUdpJitterTmplReqDataSize | 0 | 0 | This object represents the number of octets to be placed into the ARR Data portion of the request message, when using SNA protoco… |
| 1.3.6.1.4.1.9.9.635.1.1.1.17 | cipslaUdpJitterTmplPktPriority | 0 | 0 | This object specifies the priority that will be assigned to operation packet. normal(1) - The packet is of normal priority. high(2… |
| 1.3.6.1.4.1.9.9.635.1.1.1.18 | cipslaUdpJitterTmplTOS | 0 | 0 | This object represents the type of service octet in an IP header. |
| 1.3.6.1.4.1.9.9.635.1.1.1.19 | cipslaUdpJitterTmplVrfName | 0 | 0 | This field is used to specify the VRF name in which the IP SLA operation will be used. For regular IP SLA operation this field sh… |
| 1.3.6.1.4.1.9.9.635.1.1.1.20 | cipslaUdpJitterTmplThreshold | 0 | 0 | This object defines an administrative threshold limit. If the IP SLA operation time exceeds this limit, then one threshold crossi… |
| 1.3.6.1.4.1.9.9.635.1.1.1.21 | cipslaUdpJitterTmplNTPTolAbs | 0 | 0 | This object specifies the total clock synchronization error on source and responder that is considered tolerable for oneway measu… |
| 1.3.6.1.4.1.9.9.635.1.1.1.22 | cipslaUdpJitterTmplNTPTolPct | 0 | 0 | This object specifies the total clock synchronization error on source and responder that is considered tolerable for oneway measu… |
| 1.3.6.1.4.1.9.9.635.1.1.1.23 | cipslaUdpJitterTmplNTPTolType | 0 | 0 | This object specifies whether the value specified for oneway NTP sync tolerance is absolute value or percent value. percent(1) -… |
| 1.3.6.1.4.1.9.9.635.1.1.1.24 | cipslaUdpJitterTmplIcpifFactor | 0 | 0 | The advantage factor is dependant on the type of access and how the service is to be used. Conventional Wire-line 0 Mobility w… |
| 1.3.6.1.4.1.9.9.635.1.1.1.25 | cipslaUdpJitterTmplStatsHours | 0 | 0 | The maximum number of hours for which statistics are maintained. Specifically this is the number of hourly groups to keep before … |
| 1.3.6.1.4.1.9.9.635.1.1.1.26 | cipslaUdpJitterTmplDistBuckets | 0 | 0 | The maximum number of statistical distribution buckets to accumulate. Since this index does not rollover, only the first cipslaUdp… |
| 1.3.6.1.4.1.9.9.635.1.1.1.27 | cipslaUdpJitterTmplDistInterval | 0 | 0 | The statistical distribution buckets interval. Distribution Bucket Example: cipslaUdpJitterTmplDistBuckets = 5 buckets cipslaUdpJi… |
| 1.3.6.1.4.1.9.9.635.1.1.1.28 | cipslaUdpJitterTmplStorageType | 0 | 0 | The storage type of this conceptual row. |
| 1.3.6.1.4.1.9.9.635.1.1.1.30 | cipslaUdpJitterTmplRowStatus | 0 | 0 | The status of the conceptual UDP Jitter template control row. When the status is active, all the read-create objects in that row … |