The maximum number of statistical distribution
buckets to accumulate.
Since this index does not rollover, only the first
cipslaUdpJitterTmplDistBuckets will be kept.
The last bucket will contain all entries from its
distribution interval start point to infinity.
Parsed from file CISCO-IPSLA-JITTER-MIB.mib
Module: CISCO-IPSLA-JITTER-MIB
The maximum number of statistical distribution
buckets to accumulate.
Since this index does not rollover, only the first
cipslaUdpJitterTmplDistBuckets will be kept.
The last bucket will contain all entries from its
distribution interval start point to infinity.
The maximum number of statistical distribution
buckets to accumulate.
Since this index does not rollover, only the first
cipslaUdpJitterTmplDistBuckets will be kept.
The last bucket will contain all entries from its
distribution interval start point to infinity.
Parsed from file CISCO-IPSLA-JITTER-MIB.my.txt
Company: None
Module: CISCO-IPSLA-JITTER-MIB
The maximum number of statistical distribution
buckets to accumulate.
Since this index does not rollover, only the first
cipslaUdpJitterTmplDistBuckets will be kept.
The last bucket will contain all entries from its
distribution interval start point to infinity.
cipslaUdpJitterTmplDistBuckets OBJECT-TYPE SYNTAX Unsigned32 (1..20 ) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of statistical distribution buckets to accumulate. Since this index does not rollover, only the first cipslaUdpJitterTmplDistBuckets will be kept. The last bucket will contain all entries from its distribution interval start point to infinity." DEFVAL { 1 } ::= { cipslaUdpJitterTmplEntry 26 }
cipslaUdpJitterTmplDistBuckets OBJECT-TYPE SYNTAX Gauge(1..20) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of statistical distribution buckets to accumulate. Since this index does not rollover, only the first cipslaUdpJitterTmplDistBuckets will be kept. The last bucket will contain all entries from its distribution interval start point to infinity." DEFVAL { 1 } ::= { cipslaUdpJitterTmplEntry 26 }
Vendor: Cisco
Module: CISCO-IPSLA-JITTER-MIB
[Automatically extracted from oidview.com]
cipslaUdpJitterTmplDistBuckets OBJECT-TYPE SYNTAX Unsigned32 (1..20 ) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of statistical distribution buckets to accumulate. Since this index does not rollover, only the first cipslaUdpJitterTmplDistBuckets will be kept. The last bucket will contain all entries from its distribution interval start point to infinity." DEFVAL { 1 } ::= { cipslaUdpJitterTmplEntry 26 }
cipslaUdpJitterTmplDistBuckets OBJECT-TYPE SYNTAX Unsigned32 (1..20 ) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of statistical distribution buckets to accumulate. Since this index does not rollover, only the first cipslaUdpJitterTmplDistBuckets will be kept. The last bucket will contain all entries from its distribution interval start point to infinity." DEFVAL { 1 } ::= { cipslaUdpJitterTmplEntry 26 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.635.1.1.1.1 | cipslaUdpJitterTmplName | 0 | 0 | A string which specifies the UDP Jitter template name. |
1.3.6.1.4.1.9.9.635.1.1.1.2 | cipslaUdpJitterTmplDescription | 0 | 0 | A string which provides description of UDP Jitter template. |
1.3.6.1.4.1.9.9.635.1.1.1.3 | cipslaUdpJitterTmplControlEnable | 0 | 0 | If this object is enabled, then the IP SLA application will send control messages to a responder, residing on the target router t… |
1.3.6.1.4.1.9.9.635.1.1.1.4 | cipslaUdpJitterTmplTimeOut | 0 | 0 | Specifies the duration to wait for a IP SLA operation completion. For connection oriented protocols, this may cause the connection… |
1.3.6.1.4.1.9.9.635.1.1.1.5 | cipslaUdpJitterTmplVerifyData | 0 | 0 | When set to true, the resulting data in each IP SLA operation is compared with the expected data. This includes checking header … |
1.3.6.1.4.1.9.9.635.1.1.1.6 | cipslaUdpJitterTmplCodecType | 0 | 0 | Specifies the codec type to be used with UDP jitter operation. If codec-type is configured the following parameters cannot be con… |
1.3.6.1.4.1.9.9.635.1.1.1.7 | cipslaUdpJitterTmplCodecInterval | 0 | 0 | This field represents the inter-packet delay between packets and is in milliseconds. This object is applicable only to UDP jitter… |
1.3.6.1.4.1.9.9.635.1.1.1.8 | cipslaUdpJitterTmplCodecPayload | 0 | 0 | This object represents the number of octets that needs to be placed into the Data portion of the message. This value is used only… |
1.3.6.1.4.1.9.9.635.1.1.1.9 | cipslaUdpJitterTmplCodecNumPkts | 0 | 0 | This value represents the number of packets that need to be transmitted. This value is used only for UDP jitter operation which u… |
1.3.6.1.4.1.9.9.635.1.1.1.10 | cipslaUdpJitterTmplInterval | 0 | 0 | This value represents the inter-packet delay between packets and is in milliseconds. |
1.3.6.1.4.1.9.9.635.1.1.1.11 | cipslaUdpJitterTmplNumPkts | 0 | 0 | This value represents the number of packets that need to be transmitted. |
1.3.6.1.4.1.9.9.635.1.1.1.12 | cipslaUdpJitterTmplSrcAddrType | 0 | 0 | An enumerated value which specifies the IP address type of the source. It must be used along with the cipslaUdpJitterTmplSrcAddr … |
1.3.6.1.4.1.9.9.635.1.1.1.13 | cipslaUdpJitterTmplSrcAddr | 0 | 0 | This field specifies the IP address of the source. |
1.3.6.1.4.1.9.9.635.1.1.1.14 | cipslaUdpJitterTmplSrcPort | 0 | 0 | This object represents the source's port number. If this object is not specified, the application will get a port allocated by th… |
1.3.6.1.4.1.9.9.635.1.1.1.15 | cipslaUdpJitterTmplPrecision | 0 | 0 | This object specifies the accuracy of jitter statistics in rttMonJitterStatsTable that needs to be calculated. milliseconds(1) - … |
1.3.6.1.4.1.9.9.635.1.1.1.16 | cipslaUdpJitterTmplReqDataSize | 0 | 0 | This object represents the number of octets to be placed into the ARR Data portion of the request message, when using SNA protoco… |
1.3.6.1.4.1.9.9.635.1.1.1.17 | cipslaUdpJitterTmplPktPriority | 0 | 0 | This object specifies the priority that will be assigned to operation packet. normal(1) - The packet is of normal priority. high(2… |
1.3.6.1.4.1.9.9.635.1.1.1.18 | cipslaUdpJitterTmplTOS | 0 | 0 | This object represents the type of service octet in an IP header. |
1.3.6.1.4.1.9.9.635.1.1.1.19 | cipslaUdpJitterTmplVrfName | 0 | 0 | This field is used to specify the VRF name in which the IP SLA operation will be used. For regular IP SLA operation this field sh… |
1.3.6.1.4.1.9.9.635.1.1.1.20 | cipslaUdpJitterTmplThreshold | 0 | 0 | This object defines an administrative threshold limit. If the IP SLA operation time exceeds this limit, then one threshold crossi… |
1.3.6.1.4.1.9.9.635.1.1.1.21 | cipslaUdpJitterTmplNTPTolAbs | 0 | 0 | This object specifies the total clock synchronization error on source and responder that is considered tolerable for oneway measu… |
1.3.6.1.4.1.9.9.635.1.1.1.22 | cipslaUdpJitterTmplNTPTolPct | 0 | 0 | This object specifies the total clock synchronization error on source and responder that is considered tolerable for oneway measu… |
1.3.6.1.4.1.9.9.635.1.1.1.23 | cipslaUdpJitterTmplNTPTolType | 0 | 0 | This object specifies whether the value specified for oneway NTP sync tolerance is absolute value or percent value. percent(1) -… |
1.3.6.1.4.1.9.9.635.1.1.1.24 | cipslaUdpJitterTmplIcpifFactor | 0 | 0 | The advantage factor is dependant on the type of access and how the service is to be used. Conventional Wire-line 0 Mobility w… |
1.3.6.1.4.1.9.9.635.1.1.1.25 | cipslaUdpJitterTmplStatsHours | 0 | 0 | The maximum number of hours for which statistics are maintained. Specifically this is the number of hourly groups to keep before … |
1.3.6.1.4.1.9.9.635.1.1.1.27 | cipslaUdpJitterTmplDistInterval | 0 | 0 | The statistical distribution buckets interval. Distribution Bucket Example: cipslaUdpJitterTmplDistBuckets = 5 buckets cipslaUdpJi… |
1.3.6.1.4.1.9.9.635.1.1.1.28 | cipslaUdpJitterTmplStorageType | 0 | 0 | The storage type of this conceptual row. |
1.3.6.1.4.1.9.9.635.1.1.1.30 | cipslaUdpJitterTmplRowStatus | 0 | 0 | The status of the conceptual UDP Jitter template control row. When the status is active, all the read-create objects in that row … |