This variable indicates if circuit prioritization will be used
for peer-on-demand peers. True indicates that circuit
prioritization specified by the dlswCircuitPriority object
in the DLSW-MIB (RFC 2024) will be used, false indicates that
there will be no circuit prioritization.
Parsed from file CISCO-DLSW-EXT-MIB.mib
Module: CISCO-DLSW-EXT-MIB
This variable indicates if circuit prioritization will be used
for peer-on-demand peers. True indicates that circuit
prioritization specified by the dlswCircuitPriority object
in the DLSW-MIB (RFC 2024) will be used, false indicates that
there will be no circuit prioritization.
cdeNodePeerOnDemandDefaultsPriority OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates if circuit prioritization will be used
for peer-on-demand peers. True indicates that circuit
prioritization specified by the dlswCircuitPriority object
in the DLSW-MIB (RFC 2024) will be used, false indicates that
there will be no circuit prioritization."
DEFVAL { false }
View at oid-info.com
This variable indicates if circuit prioritization will be used
for peer-on-demand peers. True indicates that circuit
prioritization specified by the dlswCircuitPriority object
in the DLSW-MIB (RFC 2024) will be used, false indicates that
there will be no circuit prioritization.
Parsed from file CISCO-DLSW-EXT-MIB.my.txt
Company: None
Module: CISCO-DLSW-EXT-MIB
This variable indicates if circuit prioritization will be used
for peer-on-demand peers. True indicates that circuit
prioritization specified by the dlswCircuitPriority object
in the DLSW-MIB (RFC 2024) will be used, false indicates that
there will be no circuit prioritization.
cdeNodePeerOnDemandDefaultsPriority OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates if circuit prioritization will be used for peer-on-demand peers. True indicates that circuit prioritization specified by the dlswCircuitPriority object in the DLSW-MIB (RFC 2024) will be used, false indicates that there will be no circuit prioritization." DEFVAL { false } ::= { cdeNode 21 }
cdeNodePeerOnDemandDefaultsPriority OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if circuit prioritization will be used for peer-on-demand peers. True indicates that circuit prioritization specified by the dlswCircuitPriority object in the DLSW-MIB (RFC 2024) will be used, false indicates that there will be no circuit prioritization." DEFVAL { false } ::= { cdeNode 21 }
Automatically extracted from Cisco "SNMP v2 MIBs".
cdeNodePeerOnDemandDefaultsPriority OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates if circuit prioritization will be used for peer-on-demand peers. True indicates that circuit prioritization specified by the dlswCircuitPriority object in the DLSW-MIB (RFC 2024) will be used, false indicates that there will be no circuit prioritization." DEFVAL { false } ::= { cdeNode 21 }
cdeNodePeerOnDemandDefaultsPriority OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates if circuit prioritization will be used for peer-on-demand peers. True indicates that circuit prioritization specified by the dlswCircuitPriority object in the DLSW-MIB (RFC 2024) will be used, false indicates that there will be no circuit prioritization." DEFVAL { false } ::= { cdeNode 21 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.74.1.2.21.0 | cdeNodePeerOnDemandDefaultsPriority | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.74.1.2.1 | cdeNodeTAddr | 1 | 1 | The local peer IP address; required for Fast-Sequenced Transport (FST) and TCP. If no local peer IP address is configured then t… |
| 1.3.6.1.4.1.9.9.74.1.2.2 | cdeNodeGroup | 1 | 1 | Peer group number for this router. Peer groups are arbitrary groups of routers with one or more designated border peers. Border … |
| 1.3.6.1.4.1.9.9.74.1.2.3 | cdeNodeBorder | 1 | 1 | This variable indicates if this DLSw is capable of operating as a border peer. True indicates that it is capable, false indicate… |
| 1.3.6.1.4.1.9.9.74.1.2.4 | cdeNodeCost | 1 | 1 | Peer cost advertised to remote peers in the capabilities exchange. If an end station can be reached through more than one peer, … |
| 1.3.6.1.4.1.9.9.74.1.2.5 | cdeNodeKeepaliveInterval | 1 | 1 | Default remote peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alives t… |
| 1.3.6.1.4.1.9.9.74.1.2.6 | cdeNodePassiveConnect | 1 | 1 | This variable indicates if DLSw will not initiate remote peer connections to configured peers. True indicates that it will not i… |
| 1.3.6.1.4.1.9.9.74.1.2.7 | cdeNodeBiuSegment | 1 | 1 | This variable indicates if DLSw will spoof the maximum receivable Basic Information Unit (frame) size in XID so that each end sta… |
| 1.3.6.1.4.1.9.9.74.1.2.8 | cdeNodeInitPacingWindow | 1 | 1 | Initial pacing window size. This is the starting size of the pacing window. DLSw uses an adaptive pacing flow control algorithm… |
| 1.3.6.1.4.1.9.9.74.1.2.9 | cdeNodeMaxPacingWindow | 1 | 1 | Maximum pacing window size. This is the largest size that the pacing window will grow to. DLSw uses an adaptive pacing flow con… |
| 1.3.6.1.4.1.9.9.74.1.2.10 | cdeNodePromiscuous | 1 | 1 | This variable indicates if DLSw will accept connections from non-configured remote peers. Promiscuous routers will accept peer c… |
| 1.3.6.1.4.1.9.9.74.1.2.11 | cdeNodePromPeerDefaultsCost | 1 | 1 | This variable indicates the cost that will be used with promiscuous peers. If an end station can be reached through more than one … |
| 1.3.6.1.4.1.9.9.74.1.2.12 | cdeNodePromPeerDefaultsDestMac | 1 | 1 | Permits the promiscuous peer connection to be established only when there is an explorer frame destined for the specified 48-bit … |
| 1.3.6.1.4.1.9.9.74.1.2.13 | cdeNodePromPeerDefaultsKeepaliveInterval | 1 | 1 | Default promiscuous peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep ali… |
| 1.3.6.1.4.1.9.9.74.1.2.14 | cdeNodePromPeerDefaultsLFSize | 1 | 1 | The default Largest Frame Size associated with the default promiscuous peer transport connection. In other words its the largest … |
| 1.3.6.1.4.1.9.9.74.1.2.15 | cdeNodePromPeerDefaultsTCPQueueMax | 1 | 1 | Default promiscuous peer maximum output TCP queue size. For DLSw over TCP encapsulation, packets may be queued due to congestion … |
| 1.3.6.1.4.1.9.9.74.1.2.16 | cdeNodePeerOnDemandDefaultsCost | 1 | 1 | This variable indicates the cost that will be used with peer on demand peers. If an end station can be reached through more than o… |
| 1.3.6.1.4.1.9.9.74.1.2.17 | cdeNodePeerOnDemandDefaultsFst | 1 | 1 | This variable indicates if Fast-Sequenced Transport (FST) will be for peer on demand peers. True indicates that FST will be used… |
| 1.3.6.1.4.1.9.9.74.1.2.18 | cdeNodePeerOnDemandDefaultsInactivityInterval | 1 | 1 | This variable indicates the length of time a peer on demand connection can be idle before shutting down this peer on demand conne… |
| 1.3.6.1.4.1.9.9.74.1.2.19 | cdeNodePeerOnDemandDefaultsKeepaliveInterval | 1 | 1 | Default peer on demand keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alive… |
| 1.3.6.1.4.1.9.9.74.1.2.20 | cdeNodePeerOnDemandDefaultsLFSize | 1 | 1 | The default Largest Frame Size associated with the default peer on demand transport connections. In other words its the largest s… |
| 1.3.6.1.4.1.9.9.74.1.2.22 | cdeNodePeerOnDemandDefaultsTCPQueueMax | 1 | 1 | Default peer-on-demand Maximum output TCP queue size. For DLSw over TCP encapsulation, packets may be queued due to congestion of… |