Peer cost advertised to remote peers in the capabilities
exchange. If an end station can be reached through more
than one peer, the cost of each peer will be considered when
a circuit is established.
A lower cost indicates that peer will be the
preferred choice if there is more than one path to the
destination. A value of zero means no cost has been set
and that cost will not be considered during circuit
establishment.
Parsed from file CISCO-DLSW-EXT-MIB.mib
Module: CISCO-DLSW-EXT-MIB
Peer cost advertised to remote peers in the capabilities
exchange. If an end station can be reached through more
than one peer, the cost of each peer will be considered when
a circuit is established.
A lower cost indicates that peer will be the
preferred choice if there is more than one path to the
destination. A value of zero means no cost has been set
and that cost will not be considered during circuit
establishment.
cdeNodeCost OBJECT-TYPE
SYNTAX Cost
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Peer cost advertised to remote peers in the capabilities
exchange. If an end station can be reached through more
than one peer, the cost of each peer will be considered when
a circuit is established.
A lower cost indicates that peer will be the
preferred choice if there is more than one path to the
destination. A value of zero means no cost has been set
and that cost will not be considered during circuit
establishment."
DEFVAL { 3 }
View at oid-info.com
Peer cost advertised to remote peers in the capabilities
exchange. If an end station can be reached through more
than one peer, the cost of each peer will be considered when
a circuit is established.
A lower cost indicates that peer will be the
preferred choice if there is more than one path to the
destination. A value of zero means no cost has been set
and that cost will not be considered during circuit
establishment.
Parsed from file CISCO-DLSW-EXT-MIB.my.txt
Company: None
Module: CISCO-DLSW-EXT-MIB
Peer cost advertised to remote peers in the capabilities
exchange. If an end station can be reached through more
than one peer, the cost of each peer will be considered when
a circuit is established.
A lower cost indicates that peer will be the
preferred choice if there is more than one path to the
destination. A value of zero means no cost has been set
and that cost will not be considered during circuit
establishment.
cdeNodeCost OBJECT-TYPE SYNTAX Cost MAX-ACCESS read-write STATUS current DESCRIPTION "Peer cost advertised to remote peers in the capabilities exchange. If an end station can be reached through more than one peer, the cost of each peer will be considered when a circuit is established. A lower cost indicates that peer will be the preferred choice if there is more than one path to the destination. A value of zero means no cost has been set and that cost will not be considered during circuit establishment." DEFVAL { 3 } ::= { cdeNode 4 }
cdeNodeCost OBJECT-TYPE SYNTAX Cost ACCESS read-write STATUS mandatory DESCRIPTION "Peer cost advertised to remote peers in the capabilities exchange. If an end station can be reached through more than one peer, the cost of each peer will be considered when a circuit is established. A lower cost indicates that peer will be the preferred choice if there is more than one path to the destination. A value of zero means no cost has been set and that cost will not be considered during circuit establishment." DEFVAL { 3 } ::= { cdeNode 4 }
Automatically extracted from Cisco "SNMP v2 MIBs".
cdeNodeCost OBJECT-TYPE SYNTAX Cost MAX-ACCESS read-write STATUS current DESCRIPTION "Peer cost advertised to remote peers in the capabilities exchange. If an end station can be reached through more than one peer, the cost of each peer will be considered when a circuit is established. A lower cost indicates that peer will be the preferred choice if there is more than one path to the destination. A value of zero means no cost has been set and that cost will not be considered during circuit establishment." DEFVAL { 3 } ::= { cdeNode 4 }
cdeNodeCost OBJECT-TYPE SYNTAX Cost MAX-ACCESS read-write STATUS current DESCRIPTION "Peer cost advertised to remote peers in the capabilities exchange. If an end station can be reached through more than one peer, the cost of each peer will be considered when a circuit is established. A lower cost indicates that peer will be the preferred choice if there is more than one path to the destination. A value of zero means no cost has been set and that cost will not be considered during circuit establishment." DEFVAL { 3 } ::= { cdeNode 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.74.1.2.4.0 | cdeNodeCost | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.74.1.2.1 | cdeNodeTAddr | 1 | 1 | The local peer IP address; required for Fast-Sequenced Transport (FST) and TCP. If no local peer IP address is configured then t… |
| 1.3.6.1.4.1.9.9.74.1.2.2 | cdeNodeGroup | 1 | 1 | Peer group number for this router. Peer groups are arbitrary groups of routers with one or more designated border peers. Border … |
| 1.3.6.1.4.1.9.9.74.1.2.3 | cdeNodeBorder | 1 | 1 | This variable indicates if this DLSw is capable of operating as a border peer. True indicates that it is capable, false indicate… |
| 1.3.6.1.4.1.9.9.74.1.2.5 | cdeNodeKeepaliveInterval | 1 | 1 | Default remote peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alives t… |
| 1.3.6.1.4.1.9.9.74.1.2.6 | cdeNodePassiveConnect | 1 | 1 | This variable indicates if DLSw will not initiate remote peer connections to configured peers. True indicates that it will not i… |
| 1.3.6.1.4.1.9.9.74.1.2.7 | cdeNodeBiuSegment | 1 | 1 | This variable indicates if DLSw will spoof the maximum receivable Basic Information Unit (frame) size in XID so that each end sta… |
| 1.3.6.1.4.1.9.9.74.1.2.8 | cdeNodeInitPacingWindow | 1 | 1 | Initial pacing window size. This is the starting size of the pacing window. DLSw uses an adaptive pacing flow control algorithm… |
| 1.3.6.1.4.1.9.9.74.1.2.9 | cdeNodeMaxPacingWindow | 1 | 1 | Maximum pacing window size. This is the largest size that the pacing window will grow to. DLSw uses an adaptive pacing flow con… |
| 1.3.6.1.4.1.9.9.74.1.2.10 | cdeNodePromiscuous | 1 | 1 | This variable indicates if DLSw will accept connections from non-configured remote peers. Promiscuous routers will accept peer c… |
| 1.3.6.1.4.1.9.9.74.1.2.11 | cdeNodePromPeerDefaultsCost | 1 | 1 | This variable indicates the cost that will be used with promiscuous peers. If an end station can be reached through more than one … |
| 1.3.6.1.4.1.9.9.74.1.2.12 | cdeNodePromPeerDefaultsDestMac | 1 | 1 | Permits the promiscuous peer connection to be established only when there is an explorer frame destined for the specified 48-bit … |
| 1.3.6.1.4.1.9.9.74.1.2.13 | cdeNodePromPeerDefaultsKeepaliveInterval | 1 | 1 | Default promiscuous peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep ali… |
| 1.3.6.1.4.1.9.9.74.1.2.14 | cdeNodePromPeerDefaultsLFSize | 1 | 1 | The default Largest Frame Size associated with the default promiscuous peer transport connection. In other words its the largest … |
| 1.3.6.1.4.1.9.9.74.1.2.15 | cdeNodePromPeerDefaultsTCPQueueMax | 1 | 1 | Default promiscuous peer maximum output TCP queue size. For DLSw over TCP encapsulation, packets may be queued due to congestion … |
| 1.3.6.1.4.1.9.9.74.1.2.16 | cdeNodePeerOnDemandDefaultsCost | 1 | 1 | This variable indicates the cost that will be used with peer on demand peers. If an end station can be reached through more than o… |
| 1.3.6.1.4.1.9.9.74.1.2.17 | cdeNodePeerOnDemandDefaultsFst | 1 | 1 | This variable indicates if Fast-Sequenced Transport (FST) will be for peer on demand peers. True indicates that FST will be used… |
| 1.3.6.1.4.1.9.9.74.1.2.18 | cdeNodePeerOnDemandDefaultsInactivityInterval | 1 | 1 | This variable indicates the length of time a peer on demand connection can be idle before shutting down this peer on demand conne… |
| 1.3.6.1.4.1.9.9.74.1.2.19 | cdeNodePeerOnDemandDefaultsKeepaliveInterval | 1 | 1 | Default peer on demand keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alive… |
| 1.3.6.1.4.1.9.9.74.1.2.20 | cdeNodePeerOnDemandDefaultsLFSize | 1 | 1 | The default Largest Frame Size associated with the default peer on demand transport connections. In other words its the largest s… |
| 1.3.6.1.4.1.9.9.74.1.2.21 | cdeNodePeerOnDemandDefaultsPriority | 1 | 1 | This variable indicates if circuit prioritization will be used for peer-on-demand peers. True indicates that circuit prioritizat… |
| 1.3.6.1.4.1.9.9.74.1.2.22 | cdeNodePeerOnDemandDefaultsTCPQueueMax | 1 | 1 | Default peer-on-demand Maximum output TCP queue size. For DLSw over TCP encapsulation, packets may be queued due to congestion of… |