This object indicates an arbitrary integer-value that uniquely
identifies a set of PfR policy maps.
This object indicates an arbitrary integer-value that uniquely
identifies a set of PfR policy maps.
cpfrMapIndex OBJECT-TYPE SYNTAX PfrMapIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "This object indicates an arbitrary integer-value that uniquely identifies a set of PfR policy maps." ::= { cpfrMapEntry 1 }
cpfrMapIndex OBJECT-TYPE SYNTAX PfrMapIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates an arbitrary integer-value that uniquely identifies a set of PfR policy maps." ::= { cpfrMapEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.772.1.2.1.2 | cpfrMapPolicyIndex | 0 | 0 | This object indicates an arbitrary integer-value that, in combination with cpfrMapIndex, uniquely identifies a PfR policy map. |
| 1.3.6.1.4.1.9.9.772.1.2.1.3 | cpfrMapStorageType | 0 | 0 | This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the stor… |
| 1.3.6.1.4.1.9.9.772.1.2.1.4 | cpfrMapRowStatus | 0 | 0 | This object specifies the status of a row in the PfR map table. The following columnar objects must be valid in order to transiti… |
| 1.3.6.1.4.1.9.9.772.1.2.1.5 | cpfrMapName | 0 | 0 | This object specifies the name of a PfR map. |
| 1.3.6.1.4.1.9.9.772.1.2.1.6 | cpfrMapBackoffMinTimer | 0 | 0 | This object specifies the minimum value for the backoff timer. The backoff timer is used to configure a PfR map to set the transi… |
| 1.3.6.1.4.1.9.9.772.1.2.1.7 | cpfrMapBackoffMaxTimer | 0 | 0 | This object specifies the maximum value for the backoff timer. If the maximum timer expires and all PfR-managed exits are out-of-… |
| 1.3.6.1.4.1.9.9.772.1.2.1.8 | cpfrMapBackoffStepTimer | 0 | 0 | This object specifies the time period value for the step timer. PfR users the step timer to add time to the out-of-policy waiting… |
| 1.3.6.1.4.1.9.9.772.1.2.1.9 | cpfrMapDelayType | 0 | 0 | This object specifies the delay type of a PfR map. It is used to set the delay threshold as a relative percentage or as an absol… |
| 1.3.6.1.4.1.9.9.772.1.2.1.10 | cpfrMapDelayRelativePercent | 0 | 0 | This object specifies a relative delay threshold based on a comparison of short-term and long-term delay percentages. The value … |
| 1.3.6.1.4.1.9.9.772.1.2.1.11 | cpfrMapDelayThresholdMax | 0 | 0 | This object specifies the absolute maximum delay time. The value of this object is valid if the corresponding value of cpfrMapDe… |
| 1.3.6.1.4.1.9.9.772.1.2.1.12 | cpfrMapHolddownTimer | 0 | 0 | This object specifies the route dampening time period. It is used to configure the prefix route dampening timer for the minimum p… |
| 1.3.6.1.4.1.9.9.772.1.2.1.13 | cpfrMapPrefixForwardInterface | 0 | 0 | This object specifies whether or not a null forwarding interface has been configured. This interface is always up and can never … |
| 1.3.6.1.4.1.9.9.772.1.2.1.14 | cpfrMapJitterThresholdMax | 0 | 0 | This object specifies the maximum tolerable jitter value permitted on an exit link. |
| 1.3.6.1.4.1.9.9.772.1.2.1.15 | cpfrMapLinkGroupName | 0 | 0 | This object specifies the primary link group to be used by PfR to select an exit. It allows a group of exit links to be defined … |
| 1.3.6.1.4.1.9.9.772.1.2.1.16 | cpfrMapFallbackLinkGroupName | 0 | 0 | This object specifies a fallback link group to be used if all the exits in the primary link group are out-of-policy (OOP). |
| 1.3.6.1.4.1.9.9.772.1.2.1.17 | cpfrMapLossType | 0 | 0 | This object specifies the loss type configuration used by PfR. It specifies the relative percentage or maximum number of packets … |
| 1.3.6.1.4.1.9.9.772.1.2.1.18 | cpfrMapLossRelativeAvg | 0 | 0 | This object specifies a relative percentage of packet loss based on a comparison of short-term and long-term packet loss percenta… |
| 1.3.6.1.4.1.9.9.772.1.2.1.19 | cpfrMapLossThresholdMax | 0 | 0 | This object specifies absolute packet loss based on packets per million (PPM). The value of this object is valid if the correspo… |
| 1.3.6.1.4.1.9.9.772.1.2.1.20 | cpfrMapModeMonitor | 0 | 0 | This object specifies how a PfR MC using this PfR map should monitor the TCs. 'active' Enable active monitoring. 'activethrougput' E… |
| 1.3.6.1.4.1.9.9.772.1.2.1.21 | cpfrMapModeRouteOpts | 0 | 0 | This object specifies how a PfR MC using this PfR map should control the TCs. 'control' Monitor and report performance data and us… |
| 1.3.6.1.4.1.9.9.772.1.2.1.22 | cpfrMapRouteMetricBgpLocalPref | 0 | 0 | This object specifies the BGP local preference for PfR controlled routes. The value of this object is valid if the corresponding… |
| 1.3.6.1.4.1.9.9.772.1.2.1.23 | cpfrMapRouteMetricEigrpTagCommunity | 0 | 0 | This object specifies the community value to an EIGRP route under PfR control. The value of this object is valid if the correspo… |
| 1.3.6.1.4.1.9.9.772.1.2.1.24 | cpfrMapRouteMetricStaticTag | 0 | 0 | This object specifies the tag to a static route under PfR control. The value of this object is valid if the corresponding value … |
| 1.3.6.1.4.1.9.9.772.1.2.1.25 | cpfrMapModeSelectExitType | 0 | 0 | This object specifies how a PfR MC using this PfR map should select an exit based on performance or policy. 'best' Select the best… |
| 1.3.6.1.4.1.9.9.772.1.2.1.26 | cpfrMapMOSThresholdMin | 0 | 0 | This object specifies a threshold MOS value that represents a minimum voice quality for exit link utilization. |
| 1.3.6.1.4.1.9.9.772.1.2.1.27 | cpfrMapMOSPercentage | 0 | 0 | This object specifies a percentage value that is compared with the percentage of MOS samples that are below the MOS threshold. T… |
| 1.3.6.1.4.1.9.9.772.1.2.1.28 | cpfrMapNextHopAddressType | 0 | 0 | This object specifies the address type of the address specified as the next hop when PfR is used for sinkhole filtering. |
| 1.3.6.1.4.1.9.9.772.1.2.1.29 | cpfrMapNextHopAddress | 0 | 0 | This object specifies the next hop address to which PfR forwards packets for matching prefixes. The prefixes that are forwarded … |
| 1.3.6.1.4.1.9.9.772.1.2.1.30 | cpfrMapPeriodicTimer | 0 | 0 | This object specifies the periodic timer that PfR uses to select the best exit for the matched TCs. When this timer expires, PfR… |
| 1.3.6.1.4.1.9.9.772.1.2.1.31 | cpfrMapActiveProbeFrequency | 0 | 0 | This object specifies the frequency of active probes configured under a PfR map. |
| 1.3.6.1.4.1.9.9.772.1.2.1.32 | cpfrMapActiveProbePackets | 0 | 0 | This object specifies the number of probe packets generated for each active probe cycle. |
| 1.3.6.1.4.1.9.9.772.1.2.1.33 | cpfrMapTracerouteReporting | 0 | 0 | This object enables continuous and policy-based traceroute probing. Traceroute probing allows prefix performance to be measured … |
| 1.3.6.1.4.1.9.9.772.1.2.1.34 | cpfrMapUnreachableType | 0 | 0 | This object specifies the unreachable type configuration used by PfR. It is used to set the relative percentage or the absolute … |
| 1.3.6.1.4.1.9.9.772.1.2.1.35 | cpfrMapUnreachableRelativeAvg | 0 | 0 | This object specifies a relative percentage of unreachable hosts. The relative unreachable host percentage is based on a compari… |
| 1.3.6.1.4.1.9.9.772.1.2.1.36 | cpfrMapUnreachableThresholdMax | 0 | 0 | This object specifies the absolute maximum number of unreachable hosts based on flows per million. The value of this object is va… |
| 1.3.6.1.4.1.9.9.772.1.2.1.37 | cpfrMapRoundRobinResolver | 0 | 0 | This object specifies whether the round robin resolver is enabled or disabled. 'enable' Round robin resolver is enabled. 'disable' R… |
| 1.3.6.1.4.1.9.9.772.1.2.1.38 | cpfrMapEventNotifCtrlType | 0 | 0 | This object specifies the event notification control type configuration used by PfR. It is used to set the relative percentage o… |
| 1.3.6.1.4.1.9.9.772.1.2.1.39 | cpfrMapEventNotifCtrlThreshold | 0 | 0 | This object specifies the absolute event counter threshold or relative percentage threshold used by PfR to throttle the generatio… |
| 1.3.6.1.4.1.9.9.772.1.2.1.40 | cpfrMapEventTCCount | 0 | 0 | This object specifies the current absolute number of traffic classes, whose state are 'default' or 'oopolicy' specified by cpfrTC… |