This object specifies the absolute event counter threshold or
relative percentage threshold used by PfR to throttle the
generation of cpfrTCInpolicyThresholdBelowNotify and
cpfrTCPrimaryThresholdBelowNotify.
If the value is relative percentage threshold, then the
notification is generated if cpfrMapEventTCCount over total TC
count is more than the value of this percentage.
-
If the value is absolute event counter threshold, then the
notification is generated if cpfrEventTrapTCCount is more than
this value.
This object specifies the absolute event counter threshold or
relative percentage threshold used by PfR to throttle the
generation of cpfrTCInpolicyThresholdBelowNotify and
cpfrTCPrimaryThresholdBelowNotify.
If the value is relative percentage threshold, then the
notification is generated if cpfrMapEventTCCount over total TC
count is more than the value of this percentage.
-
If the value is absolute event counter threshold, then the
notification is generated if cpfrEventTrapTCCount is more than
this value.
cpfrMapEventNotifCtrlThreshold OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the absolute event counter threshold or relative percentage threshold used by PfR to throttle the generation of cpfrTCInpolicyThresholdBelowNotify and cpfrTCPrimaryThresholdBelowNotify. If the value is relative percentage threshold, then the notification is generated if cpfrMapEventTCCount over total TC count is more than the value of this percentage. - If the value is absolute event counter threshold, then the notification is generated if cpfrEventTrapTCCount is more than this value." ::= { cpfrMapEntry 39 }
cpfrMapEventNotifCtrlThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the absolute event counter threshold or relative percentage threshold used by PfR to throttle the generation of cpfrTCInpolicyThresholdBelowNotify and cpfrTCPrimaryThresholdBelowNotify. If the value is relative percentage threshold, then the notification is generated if cpfrMapEventTCCount over total TC count is more than the value of this percentage. - If the value is absolute event counter threshold, then the notification is generated if cpfrEventTrapTCCount is more than this value." ::= { cpfrMapEntry 39 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.772.1.2.1.1 | cpfrMapIndex | 0 | 0 | This object indicates an arbitrary integer-value that uniquely identifies a set of PfR policy maps. |
| 1.3.6.1.4.1.9.9.772.1.2.1.2 | cpfrMapPolicyIndex | 0 | 0 | This object indicates an arbitrary integer-value that, in combination with cpfrMapIndex, uniquely identifies a PfR policy map. |
| 1.3.6.1.4.1.9.9.772.1.2.1.3 | cpfrMapStorageType | 0 | 0 | This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the stor… |
| 1.3.6.1.4.1.9.9.772.1.2.1.4 | cpfrMapRowStatus | 0 | 0 | This object specifies the status of a row in the PfR map table. The following columnar objects must be valid in order to transiti… |
| 1.3.6.1.4.1.9.9.772.1.2.1.5 | cpfrMapName | 0 | 0 | This object specifies the name of a PfR map. |
| 1.3.6.1.4.1.9.9.772.1.2.1.6 | cpfrMapBackoffMinTimer | 0 | 0 | This object specifies the minimum value for the backoff timer. The backoff timer is used to configure a PfR map to set the transi… |
| 1.3.6.1.4.1.9.9.772.1.2.1.7 | cpfrMapBackoffMaxTimer | 0 | 0 | This object specifies the maximum value for the backoff timer. If the maximum timer expires and all PfR-managed exits are out-of-… |
| 1.3.6.1.4.1.9.9.772.1.2.1.8 | cpfrMapBackoffStepTimer | 0 | 0 | This object specifies the time period value for the step timer. PfR users the step timer to add time to the out-of-policy waiting… |
| 1.3.6.1.4.1.9.9.772.1.2.1.9 | cpfrMapDelayType | 0 | 0 | This object specifies the delay type of a PfR map. It is used to set the delay threshold as a relative percentage or as an absol… |
| 1.3.6.1.4.1.9.9.772.1.2.1.10 | cpfrMapDelayRelativePercent | 0 | 0 | This object specifies a relative delay threshold based on a comparison of short-term and long-term delay percentages. The value … |
| 1.3.6.1.4.1.9.9.772.1.2.1.11 | cpfrMapDelayThresholdMax | 0 | 0 | This object specifies the absolute maximum delay time. The value of this object is valid if the corresponding value of cpfrMapDe… |
| 1.3.6.1.4.1.9.9.772.1.2.1.12 | cpfrMapHolddownTimer | 0 | 0 | This object specifies the route dampening time period. It is used to configure the prefix route dampening timer for the minimum p… |
| 1.3.6.1.4.1.9.9.772.1.2.1.13 | cpfrMapPrefixForwardInterface | 0 | 0 | This object specifies whether or not a null forwarding interface has been configured. This interface is always up and can never … |
| 1.3.6.1.4.1.9.9.772.1.2.1.14 | cpfrMapJitterThresholdMax | 0 | 0 | This object specifies the maximum tolerable jitter value permitted on an exit link. |
| 1.3.6.1.4.1.9.9.772.1.2.1.15 | cpfrMapLinkGroupName | 0 | 0 | This object specifies the primary link group to be used by PfR to select an exit. It allows a group of exit links to be defined … |
| 1.3.6.1.4.1.9.9.772.1.2.1.16 | cpfrMapFallbackLinkGroupName | 0 | 0 | This object specifies a fallback link group to be used if all the exits in the primary link group are out-of-policy (OOP). |
| 1.3.6.1.4.1.9.9.772.1.2.1.17 | cpfrMapLossType | 0 | 0 | This object specifies the loss type configuration used by PfR. It specifies the relative percentage or maximum number of packets … |
| 1.3.6.1.4.1.9.9.772.1.2.1.18 | cpfrMapLossRelativeAvg | 0 | 0 | This object specifies a relative percentage of packet loss based on a comparison of short-term and long-term packet loss percenta… |
| 1.3.6.1.4.1.9.9.772.1.2.1.19 | cpfrMapLossThresholdMax | 0 | 0 | This object specifies absolute packet loss based on packets per million (PPM). The value of this object is valid if the correspo… |
| 1.3.6.1.4.1.9.9.772.1.2.1.20 | cpfrMapModeMonitor | 0 | 0 | This object specifies how a PfR MC using this PfR map should monitor the TCs. 'active' Enable active monitoring. 'activethrougput' E… |
| 1.3.6.1.4.1.9.9.772.1.2.1.21 | cpfrMapModeRouteOpts | 0 | 0 | This object specifies how a PfR MC using this PfR map should control the TCs. 'control' Monitor and report performance data and us… |
| 1.3.6.1.4.1.9.9.772.1.2.1.22 | cpfrMapRouteMetricBgpLocalPref | 0 | 0 | This object specifies the BGP local preference for PfR controlled routes. The value of this object is valid if the corresponding… |
| 1.3.6.1.4.1.9.9.772.1.2.1.23 | cpfrMapRouteMetricEigrpTagCommunity | 0 | 0 | This object specifies the community value to an EIGRP route under PfR control. The value of this object is valid if the correspo… |
| 1.3.6.1.4.1.9.9.772.1.2.1.24 | cpfrMapRouteMetricStaticTag | 0 | 0 | This object specifies the tag to a static route under PfR control. The value of this object is valid if the corresponding value … |
| 1.3.6.1.4.1.9.9.772.1.2.1.25 | cpfrMapModeSelectExitType | 0 | 0 | This object specifies how a PfR MC using this PfR map should select an exit based on performance or policy. 'best' Select the best… |
| 1.3.6.1.4.1.9.9.772.1.2.1.26 | cpfrMapMOSThresholdMin | 0 | 0 | This object specifies a threshold MOS value that represents a minimum voice quality for exit link utilization. |
| 1.3.6.1.4.1.9.9.772.1.2.1.27 | cpfrMapMOSPercentage | 0 | 0 | This object specifies a percentage value that is compared with the percentage of MOS samples that are below the MOS threshold. T… |
| 1.3.6.1.4.1.9.9.772.1.2.1.28 | cpfrMapNextHopAddressType | 0 | 0 | This object specifies the address type of the address specified as the next hop when PfR is used for sinkhole filtering. |
| 1.3.6.1.4.1.9.9.772.1.2.1.29 | cpfrMapNextHopAddress | 0 | 0 | This object specifies the next hop address to which PfR forwards packets for matching prefixes. The prefixes that are forwarded … |
| 1.3.6.1.4.1.9.9.772.1.2.1.30 | cpfrMapPeriodicTimer | 0 | 0 | This object specifies the periodic timer that PfR uses to select the best exit for the matched TCs. When this timer expires, PfR… |
| 1.3.6.1.4.1.9.9.772.1.2.1.31 | cpfrMapActiveProbeFrequency | 0 | 0 | This object specifies the frequency of active probes configured under a PfR map. |
| 1.3.6.1.4.1.9.9.772.1.2.1.32 | cpfrMapActiveProbePackets | 0 | 0 | This object specifies the number of probe packets generated for each active probe cycle. |
| 1.3.6.1.4.1.9.9.772.1.2.1.33 | cpfrMapTracerouteReporting | 0 | 0 | This object enables continuous and policy-based traceroute probing. Traceroute probing allows prefix performance to be measured … |
| 1.3.6.1.4.1.9.9.772.1.2.1.34 | cpfrMapUnreachableType | 0 | 0 | This object specifies the unreachable type configuration used by PfR. It is used to set the relative percentage or the absolute … |
| 1.3.6.1.4.1.9.9.772.1.2.1.35 | cpfrMapUnreachableRelativeAvg | 0 | 0 | This object specifies a relative percentage of unreachable hosts. The relative unreachable host percentage is based on a compari… |
| 1.3.6.1.4.1.9.9.772.1.2.1.36 | cpfrMapUnreachableThresholdMax | 0 | 0 | This object specifies the absolute maximum number of unreachable hosts based on flows per million. The value of this object is va… |
| 1.3.6.1.4.1.9.9.772.1.2.1.37 | cpfrMapRoundRobinResolver | 0 | 0 | This object specifies whether the round robin resolver is enabled or disabled. 'enable' Round robin resolver is enabled. 'disable' R… |
| 1.3.6.1.4.1.9.9.772.1.2.1.38 | cpfrMapEventNotifCtrlType | 0 | 0 | This object specifies the event notification control type configuration used by PfR. It is used to set the relative percentage o… |
| 1.3.6.1.4.1.9.9.772.1.2.1.40 | cpfrMapEventTCCount | 0 | 0 | This object specifies the current absolute number of traffic classes, whose state are 'default' or 'oopolicy' specified by cpfrTC… |