This object indicates the exit link cost for the month prior to
the previous month.
This object indicates the exit link cost for the month prior to
the previous month.
cpfrExitCost3 OBJECT-TYPE SYNTAX Gauge(0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the exit link cost for the month prior to the previous month." ::= { cpfrExitEntry 38 }
cpfrExitCost3 OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) UNITS "dollars" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the exit link cost for the month prior to the previous month." ::= { cpfrExitEntry 38 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.772.1.9.1.1 | cpfrExitIndex | 0 | 0 | This object indicates an arbitrary integer-value that uniquely identifies a PfR monitored/controlled exit. |
| 1.3.6.1.4.1.9.9.772.1.9.1.2 | cpfrExitStorageType | 0 | 0 | This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the stor… |
| 1.3.6.1.4.1.9.9.772.1.9.1.3 | cpfrExitRowStatus | 0 | 0 | This object specifies the status of a row in the exit table. The following columnar objects must be valid in order to transition … |
| 1.3.6.1.4.1.9.9.772.1.9.1.4 | cpfrExitName | 0 | 0 | This object specifies the name of a PfR controlled interface on a BR. |
| 1.3.6.1.4.1.9.9.772.1.9.1.5 | cpfrExitType | 0 | 0 | This object specifies the exit type. 'internal' The interface is an internal interface. Internal interfaces are used for communica… |
| 1.3.6.1.4.1.9.9.772.1.9.1.6 | cpfrDowngradeBgpCommunity | 0 | 0 | This object specifies a BGP prepend community number attached to an inside prefix BGP advertisement from the network to another a… |
| 1.3.6.1.4.1.9.9.772.1.9.1.7 | cpfrExitMaxUtilRxType | 0 | 0 | This object specifies the maximum utilization configuration type for incoming traffic over a single PfR exit. |
| 1.3.6.1.4.1.9.9.772.1.9.1.8 | cpfrExitMaxUtilRxAbsolute | 0 | 0 | This object specifies the maximum utilization on a PfR managed entrance link to an absolute value. |
| 1.3.6.1.4.1.9.9.772.1.9.1.9 | cpfrExitMaxUtilRxPercentage | 0 | 0 | This object specifies the maximum utilization on a PfR managed entrance link to a bandwidth percentage. |
| 1.3.6.1.4.1.9.9.772.1.9.1.10 | cpfrExitMaxUtilTxType | 0 | 0 | This object specifies the maximum utilization configuration type for traffic over a single PfR managed exit. |
| 1.3.6.1.4.1.9.9.772.1.9.1.11 | cpfrExitMaxUtilTxAbsolute | 0 | 0 | This object indicates the maximum utilization on a PfR managed exit link to an absolute value. |
| 1.3.6.1.4.1.9.9.772.1.9.1.12 | cpfrExitMaxUtilTxPercentage | 0 | 0 | This object specifies the maximum utilization on a PfR managed exit link to a bandwidth percentage. |
| 1.3.6.1.4.1.9.9.772.1.9.1.13 | cpfrExitCostCalcMethod | 0 | 0 | This object indicates how the fee for a particular exit is calculated. 'combined' Specifies billing based on combined egress and i… |
| 1.3.6.1.4.1.9.9.772.1.9.1.14 | cpfrExitCostDiscard | 0 | 0 | This object specifies how often rollup samples are discarded. 'daily' Rollup samples are discarded every day. 'monthly' Rollup samp… |
| 1.3.6.1.4.1.9.9.772.1.9.1.15 | cpfrExitCostDiscardType | 0 | 0 | This object specifies the threshold value types for cost discard. 'absolute' Absolute value configured in cpfrExitCostDiscardAbsol… |
| 1.3.6.1.4.1.9.9.772.1.9.1.16 | cpfrExitCostDiscardAbsolute | 0 | 0 | This object specifies an absolute number of rollup samples to be discarded. |
| 1.3.6.1.4.1.9.9.772.1.9.1.17 | cpfrExitCostDiscardPercent | 0 | 0 | This object specifies what percentage of the rollup samples should be discarded when calculating the exit cost. |
| 1.3.6.1.4.1.9.9.772.1.9.1.18 | cpfrExitCostEndDayOfMonth | 0 | 0 | This object specifies the end billing date. |
| 1.3.6.1.4.1.9.9.772.1.9.1.19 | cpfrExitCostEndOffsetType | 0 | 0 | This object indicates the cpfrExitCostEndOffset is before or after cpfrExitCostEndDayOfMonth. 'positive' time After cpfrExitCostEn… |
| 1.3.6.1.4.1.9.9.772.1.9.1.20 | cpfrExitCostEndOffset | 0 | 0 | This object indicates an offset in hours and minutes, allowing you to compensate for time zone differences. |
| 1.3.6.1.4.1.9.9.772.1.9.1.21 | cpfrExitCostFixedFeeCost | 0 | 0 | This object specifies a non-usage based fixed fee. |
| 1.3.6.1.4.1.9.9.772.1.9.1.22 | cpfrExitCostNickName | 0 | 0 | This object specifies a nickname for the cost structure. |
| 1.3.6.1.4.1.9.9.772.1.9.1.23 | cpfrExitCostSamplingPeriod | 0 | 0 | This object specifies the sampling period. |
| 1.3.6.1.4.1.9.9.772.1.9.1.24 | cpfrExitCostRollupPeriod | 0 | 0 | This object specifies that samples are rolled up at the interval specified for the minutes argument. This value must be greater t… |
| 1.3.6.1.4.1.9.9.772.1.9.1.25 | cpfrExitCostSummerTimeStart | 0 | 0 | This object indicates the date and time when the daylight savings time starts. |
| 1.3.6.1.4.1.9.9.772.1.9.1.26 | cpfrExitCostSummerTimeOffset | 0 | 0 | This object specifies the offset added in the spring and subtracted in the fall. |
| 1.3.6.1.4.1.9.9.772.1.9.1.27 | cpfrExitCostSummerTimeEnd | 0 | 0 | This object indicates the date and time when daylight saving time comes to an end. |
| 1.3.6.1.4.1.9.9.772.1.9.1.28 | cpfrExitCapacity | 0 | 0 | This object indicates the capacity of the interface. |
| 1.3.6.1.4.1.9.9.772.1.9.1.29 | cpfrExitRxBandwidth | 0 | 0 | This object indicates the receive bandwidth as configured on the interface. |
| 1.3.6.1.4.1.9.9.772.1.9.1.30 | cpfrExitTxBandwidth | 0 | 0 | This object indicates the transmit bandwidth as configured on the interface. |
| 1.3.6.1.4.1.9.9.772.1.9.1.31 | cpfrExitTxLoad | 0 | 0 | This object indicates the transmit load of the exit. |
| 1.3.6.1.4.1.9.9.772.1.9.1.32 | cpfrExitRxLoad | 0 | 0 | This object indicates the receive traffic load of the exit. |
| 1.3.6.1.4.1.9.9.772.1.9.1.33 | cpfrExitNickName | 0 | 0 | The object indicates the exit nickname assigned to an external PfR interface. |
| 1.3.6.1.4.1.9.9.772.1.9.1.34 | cpfrExitCost1 | 0 | 0 | This object indicates the exit link cost for the current month. |
| 1.3.6.1.4.1.9.9.772.1.9.1.35 | cpfrExitSustainedUtil1 | 0 | 0 | This object indicates the sustained utilization of the exit link in the current month. |
| 1.3.6.1.4.1.9.9.772.1.9.1.36 | cpfrExitCost2 | 0 | 0 | This object indicates the exit link cost of the previous month. |
| 1.3.6.1.4.1.9.9.772.1.9.1.37 | cpfrExitSustainedUtil2 | 0 | 0 | This object indicates the sustained utilization of the exit link for the month prior to the previous month. |
| 1.3.6.1.4.1.9.9.772.1.9.1.39 | cpfrExitSustainedUtil3 | 0 | 0 | This object indicates the sustained utilization of the exit link the month prior to the previous month. |
| 1.3.6.1.4.1.9.9.772.1.9.1.40 | cpfrExitRollupTotal | 0 | 0 | This object indicates the total rollups. |
| 1.3.6.1.4.1.9.9.772.1.9.1.41 | cpfrExitRollupDiscard | 0 | 0 | This object indicates the total discarded rollups. |
| 1.3.6.1.4.1.9.9.772.1.9.1.42 | cpfrExitRollupLeft | 0 | 0 | This object indicates the left over rollups. |
| 1.3.6.1.4.1.9.9.772.1.9.1.43 | cpfrExitRollupCollected | 0 | 0 | This object indicates the rollups that are being collected. |
| 1.3.6.1.4.1.9.9.772.1.9.1.44 | cpfrExitRollupMomTgtUtil | 0 | 0 | This object indicates the momentary utilization of the targets. |
| 1.3.6.1.4.1.9.9.772.1.9.1.45 | cpfrExitRollupStartingTgtUtil | 0 | 0 | This object indicates the target when the rollup starts. |
| 1.3.6.1.4.1.9.9.772.1.9.1.46 | cpfrExitRollupCurrentTgtUtil | 0 | 0 | This object indicates current rollup target. |
| 1.3.6.1.4.1.9.9.772.1.9.1.47 | cpfrExitRollupCumRxBytes | 0 | 0 | This object indicates the cumulative receive bytes in a rollup. |
| 1.3.6.1.4.1.9.9.772.1.9.1.48 | cpfrExitRollupCumTxBytes | 0 | 0 | This object indicates the cumulative transmit bytes in a rollup. |
| 1.3.6.1.4.1.9.9.772.1.9.1.49 | cpfrExitRollupTimeRemain | 0 | 0 | This object indicates the remaining time before a new rollup is started. |
| 1.3.6.1.4.1.9.9.772.1.9.1.50 | cpfrExitOperStatus | 0 | 0 | This object indicates the current status of an exit. 'up' The exit is up. 'down' The exit is down. |
| 1.3.6.1.4.1.9.9.772.1.9.1.51 | cpfrExitRsvpBandwidthPool | 0 | 0 | This object indicates the bandwidth pool for RSVP in PfR. |