This object indicates the cumulative transmit bytes in a
rollup.
This object indicates the cumulative transmit bytes in a
rollup.
cpfrExitRollupCumTxBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the cumulative transmit bytes in a rollup." ::= { cpfrExitEntry 48 }
cpfrExitRollupCumTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the cumulative transmit bytes in a rollup." ::= { cpfrExitEntry 48 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.772.1.9.1.1 | cpfrExitIndex | 0 | 0 | This object indicates an arbitrary integer-value that uniquely identifies a PfR monitored/controlled exit. |
1.3.6.1.4.1.9.9.772.1.9.1.2 | cpfrExitStorageType | 0 | 0 | This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the stor… |
1.3.6.1.4.1.9.9.772.1.9.1.3 | cpfrExitRowStatus | 0 | 0 | This object specifies the status of a row in the exit table. The following columnar objects must be valid in order to transition … |
1.3.6.1.4.1.9.9.772.1.9.1.4 | cpfrExitName | 0 | 0 | This object specifies the name of a PfR controlled interface on a BR. |
1.3.6.1.4.1.9.9.772.1.9.1.5 | cpfrExitType | 0 | 0 | This object specifies the exit type. 'internal' The interface is an internal interface. Internal interfaces are used for communica… |
1.3.6.1.4.1.9.9.772.1.9.1.6 | cpfrDowngradeBgpCommunity | 0 | 0 | This object specifies a BGP prepend community number attached to an inside prefix BGP advertisement from the network to another a… |
1.3.6.1.4.1.9.9.772.1.9.1.7 | cpfrExitMaxUtilRxType | 0 | 0 | This object specifies the maximum utilization configuration type for incoming traffic over a single PfR exit. |
1.3.6.1.4.1.9.9.772.1.9.1.8 | cpfrExitMaxUtilRxAbsolute | 0 | 0 | This object specifies the maximum utilization on a PfR managed entrance link to an absolute value. |
1.3.6.1.4.1.9.9.772.1.9.1.9 | cpfrExitMaxUtilRxPercentage | 0 | 0 | This object specifies the maximum utilization on a PfR managed entrance link to a bandwidth percentage. |
1.3.6.1.4.1.9.9.772.1.9.1.10 | cpfrExitMaxUtilTxType | 0 | 0 | This object specifies the maximum utilization configuration type for traffic over a single PfR managed exit. |
1.3.6.1.4.1.9.9.772.1.9.1.11 | cpfrExitMaxUtilTxAbsolute | 0 | 0 | This object indicates the maximum utilization on a PfR managed exit link to an absolute value. |
1.3.6.1.4.1.9.9.772.1.9.1.12 | cpfrExitMaxUtilTxPercentage | 0 | 0 | This object specifies the maximum utilization on a PfR managed exit link to a bandwidth percentage. |
1.3.6.1.4.1.9.9.772.1.9.1.13 | cpfrExitCostCalcMethod | 0 | 0 | This object indicates how the fee for a particular exit is calculated. 'combined' Specifies billing based on combined egress and i… |
1.3.6.1.4.1.9.9.772.1.9.1.14 | cpfrExitCostDiscard | 0 | 0 | This object specifies how often rollup samples are discarded. 'daily' Rollup samples are discarded every day. 'monthly' Rollup samp… |
1.3.6.1.4.1.9.9.772.1.9.1.15 | cpfrExitCostDiscardType | 0 | 0 | This object specifies the threshold value types for cost discard. 'absolute' Absolute value configured in cpfrExitCostDiscardAbsol… |
1.3.6.1.4.1.9.9.772.1.9.1.16 | cpfrExitCostDiscardAbsolute | 0 | 0 | This object specifies an absolute number of rollup samples to be discarded. |
1.3.6.1.4.1.9.9.772.1.9.1.17 | cpfrExitCostDiscardPercent | 0 | 0 | This object specifies what percentage of the rollup samples should be discarded when calculating the exit cost. |
1.3.6.1.4.1.9.9.772.1.9.1.18 | cpfrExitCostEndDayOfMonth | 0 | 0 | This object specifies the end billing date. |
1.3.6.1.4.1.9.9.772.1.9.1.19 | cpfrExitCostEndOffsetType | 0 | 0 | This object indicates the cpfrExitCostEndOffset is before or after cpfrExitCostEndDayOfMonth. 'positive' time After cpfrExitCostEn… |
1.3.6.1.4.1.9.9.772.1.9.1.20 | cpfrExitCostEndOffset | 0 | 0 | This object indicates an offset in hours and minutes, allowing you to compensate for time zone differences. |
1.3.6.1.4.1.9.9.772.1.9.1.21 | cpfrExitCostFixedFeeCost | 0 | 0 | This object specifies a non-usage based fixed fee. |
1.3.6.1.4.1.9.9.772.1.9.1.22 | cpfrExitCostNickName | 0 | 0 | This object specifies a nickname for the cost structure. |
1.3.6.1.4.1.9.9.772.1.9.1.23 | cpfrExitCostSamplingPeriod | 0 | 0 | This object specifies the sampling period. |
1.3.6.1.4.1.9.9.772.1.9.1.24 | cpfrExitCostRollupPeriod | 0 | 0 | This object specifies that samples are rolled up at the interval specified for the minutes argument. This value must be greater t… |
1.3.6.1.4.1.9.9.772.1.9.1.25 | cpfrExitCostSummerTimeStart | 0 | 0 | This object indicates the date and time when the daylight savings time starts. |
1.3.6.1.4.1.9.9.772.1.9.1.26 | cpfrExitCostSummerTimeOffset | 0 | 0 | This object specifies the offset added in the spring and subtracted in the fall. |
1.3.6.1.4.1.9.9.772.1.9.1.27 | cpfrExitCostSummerTimeEnd | 0 | 0 | This object indicates the date and time when daylight saving time comes to an end. |
1.3.6.1.4.1.9.9.772.1.9.1.28 | cpfrExitCapacity | 0 | 0 | This object indicates the capacity of the interface. |
1.3.6.1.4.1.9.9.772.1.9.1.29 | cpfrExitRxBandwidth | 0 | 0 | This object indicates the receive bandwidth as configured on the interface. |
1.3.6.1.4.1.9.9.772.1.9.1.30 | cpfrExitTxBandwidth | 0 | 0 | This object indicates the transmit bandwidth as configured on the interface. |
1.3.6.1.4.1.9.9.772.1.9.1.31 | cpfrExitTxLoad | 0 | 0 | This object indicates the transmit load of the exit. |
1.3.6.1.4.1.9.9.772.1.9.1.32 | cpfrExitRxLoad | 0 | 0 | This object indicates the receive traffic load of the exit. |
1.3.6.1.4.1.9.9.772.1.9.1.33 | cpfrExitNickName | 0 | 0 | The object indicates the exit nickname assigned to an external PfR interface. |
1.3.6.1.4.1.9.9.772.1.9.1.34 | cpfrExitCost1 | 0 | 0 | This object indicates the exit link cost for the current month. |
1.3.6.1.4.1.9.9.772.1.9.1.35 | cpfrExitSustainedUtil1 | 0 | 0 | This object indicates the sustained utilization of the exit link in the current month. |
1.3.6.1.4.1.9.9.772.1.9.1.36 | cpfrExitCost2 | 0 | 0 | This object indicates the exit link cost of the previous month. |
1.3.6.1.4.1.9.9.772.1.9.1.37 | cpfrExitSustainedUtil2 | 0 | 0 | This object indicates the sustained utilization of the exit link for the month prior to the previous month. |
1.3.6.1.4.1.9.9.772.1.9.1.38 | cpfrExitCost3 | 0 | 0 | This object indicates the exit link cost for the month prior to the previous month. |
1.3.6.1.4.1.9.9.772.1.9.1.39 | cpfrExitSustainedUtil3 | 0 | 0 | This object indicates the sustained utilization of the exit link the month prior to the previous month. |
1.3.6.1.4.1.9.9.772.1.9.1.40 | cpfrExitRollupTotal | 0 | 0 | This object indicates the total rollups. |
1.3.6.1.4.1.9.9.772.1.9.1.41 | cpfrExitRollupDiscard | 0 | 0 | This object indicates the total discarded rollups. |
1.3.6.1.4.1.9.9.772.1.9.1.42 | cpfrExitRollupLeft | 0 | 0 | This object indicates the left over rollups. |
1.3.6.1.4.1.9.9.772.1.9.1.43 | cpfrExitRollupCollected | 0 | 0 | This object indicates the rollups that are being collected. |
1.3.6.1.4.1.9.9.772.1.9.1.44 | cpfrExitRollupMomTgtUtil | 0 | 0 | This object indicates the momentary utilization of the targets. |
1.3.6.1.4.1.9.9.772.1.9.1.45 | cpfrExitRollupStartingTgtUtil | 0 | 0 | This object indicates the target when the rollup starts. |
1.3.6.1.4.1.9.9.772.1.9.1.46 | cpfrExitRollupCurrentTgtUtil | 0 | 0 | This object indicates current rollup target. |
1.3.6.1.4.1.9.9.772.1.9.1.47 | cpfrExitRollupCumRxBytes | 0 | 0 | This object indicates the cumulative receive bytes in a rollup. |
1.3.6.1.4.1.9.9.772.1.9.1.49 | cpfrExitRollupTimeRemain | 0 | 0 | This object indicates the remaining time before a new rollup is started. |
1.3.6.1.4.1.9.9.772.1.9.1.50 | cpfrExitOperStatus | 0 | 0 | This object indicates the current status of an exit. 'up' The exit is up. 'down' The exit is down. |
1.3.6.1.4.1.9.9.772.1.9.1.51 | cpfrExitRsvpBandwidthPool | 0 | 0 | This object indicates the bandwidth pool for RSVP in PfR. |