This object is used to configure the frequency on optical
channel interfaces in 100 MHz.
This object is used to configure the frequency on optical
channel interfaces in 100 MHz.
coiOpticalControllerFrequency OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to configure the frequency on optical channel interfaces in 100 MHz." ::= { coiOpticalControllerEntry 3 }
coiOpticalControllerFrequency OBJECT-TYPE SYNTAX Unsigned32 UNITS "100 MHz" MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure the frequency on optical channel interfaces in 100 MHz." ::= { coiOpticalControllerEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.828.1.1.2.1.1 | coiOpticalControllerWavelength | 0 | 0 | This object is used to configure the wavelength on optical channel interfaces in 1/100 nm. |
1.3.6.1.4.1.9.9.828.1.1.2.1.2 | coiOpticalControllerLaserStatus | 0 | 0 | This object gives the current operational state of the Laser. Valid values are - 'up' - The laser is operational. 'down' -… |
1.3.6.1.4.1.9.9.828.1.1.2.1.4 | coiOpticalControllerChannelNumber | 0 | 0 | This object is used to configure the channel number on optical channel interfaces. Channel Number is set to 0 if not 50GHz grid. |
1.3.6.1.4.1.9.9.828.1.1.2.1.5 | coiOpticalControllerTransmitPower | 0 | 0 | This object is used to configure the Transmit Power in 1/100 dBm on optical channel interfaces. |
1.3.6.1.4.1.9.9.828.1.1.2.1.6 | coiOpticalControllerOpticsType | 0 | 0 | This object gives the description of optics present on optical channel interfaces. |
1.3.6.1.4.1.9.9.828.1.1.2.1.7 | coiOpticalControllerRXLowThreshold | 0 | 0 | This object is used to configure the Receive Low Threshold in 1/100 dBm on optical channel interfaces. |
1.3.6.1.4.1.9.9.828.1.1.2.1.8 | coiOpticalControllerTXLowThreshold | 0 | 0 | This object is used to configure the Transmit Low Threshold in 1/100 dBm on optical channel interfaces. |
1.3.6.1.4.1.9.9.828.1.1.2.1.9 | coiOpticalControllerRXHighThreshold | 0 | 0 | This object is used to configure the Receive High Threshold in 1/100 dBm on optical channel interfaces. |
1.3.6.1.4.1.9.9.828.1.1.2.1.10 | coiOpticalControllerTXHighThreshold | 0 | 0 | This object is used to configure the Transmit High Threshold in 1/100 dBm on optical channel interfaces. |
1.3.6.1.4.1.9.9.828.1.1.2.1.11 | coiOpticalControllerLBCHighThreshold | 0 | 0 | This object is used to configure the Laser Bias Current High Threshold in 1/10% on optical channel interfaces. |
1.3.6.1.4.1.9.9.828.1.1.2.1.12 | coiOpticalControllerStatus | 0 | 0 | This object indicates the current defect status of the Optics layer. noDefect(0): No Defect. This bit is set high when no de… |
1.3.6.1.4.1.9.9.828.1.1.2.1.13 | coiOpticalControllerPortType | 0 | 0 | This object gives the port type of the optical interface. |