This object gives the description of optics present on optical
channel interfaces.
This object gives the description of optics present on optical
channel interfaces.
coiOpticalControllerOpticsType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object gives the description of optics present on optical channel interfaces." ::= { coiOpticalControllerEntry 6 }
coiOpticalControllerOpticsType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the description of optics present on optical channel interfaces." ::= { coiOpticalControllerEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.828.1.1.2.1.1 | coiOpticalControllerWavelength | 0 | 0 | This object is used to configure the wavelength on optical channel interfaces in 1/100 nm. |
1.3.6.1.4.1.9.9.828.1.1.2.1.2 | coiOpticalControllerLaserStatus | 0 | 0 | This object gives the current operational state of the Laser. Valid values are - 'up' - The laser is operational. 'down' -… |
1.3.6.1.4.1.9.9.828.1.1.2.1.3 | coiOpticalControllerFrequency | 0 | 0 | This object is used to configure the frequency on optical channel interfaces in 100 MHz. |
1.3.6.1.4.1.9.9.828.1.1.2.1.4 | coiOpticalControllerChannelNumber | 0 | 0 | This object is used to configure the channel number on optical channel interfaces. Channel Number is set to 0 if not 50GHz grid. |
1.3.6.1.4.1.9.9.828.1.1.2.1.5 | coiOpticalControllerTransmitPower | 0 | 0 | This object is used to configure the Transmit Power in 1/100 dBm on optical channel interfaces. |
1.3.6.1.4.1.9.9.828.1.1.2.1.7 | coiOpticalControllerRXLowThreshold | 0 | 0 | This object is used to configure the Receive Low Threshold in 1/100 dBm on optical channel interfaces. |
1.3.6.1.4.1.9.9.828.1.1.2.1.8 | coiOpticalControllerTXLowThreshold | 0 | 0 | This object is used to configure the Transmit Low Threshold in 1/100 dBm on optical channel interfaces. |
1.3.6.1.4.1.9.9.828.1.1.2.1.9 | coiOpticalControllerRXHighThreshold | 0 | 0 | This object is used to configure the Receive High Threshold in 1/100 dBm on optical channel interfaces. |
1.3.6.1.4.1.9.9.828.1.1.2.1.10 | coiOpticalControllerTXHighThreshold | 0 | 0 | This object is used to configure the Transmit High Threshold in 1/100 dBm on optical channel interfaces. |
1.3.6.1.4.1.9.9.828.1.1.2.1.11 | coiOpticalControllerLBCHighThreshold | 0 | 0 | This object is used to configure the Laser Bias Current High Threshold in 1/10% on optical channel interfaces. |
1.3.6.1.4.1.9.9.828.1.1.2.1.12 | coiOpticalControllerStatus | 0 | 0 | This object indicates the current defect status of the Optics layer. noDefect(0): No Defect. This bit is set high when no de… |
1.3.6.1.4.1.9.9.828.1.1.2.1.13 | coiOpticalControllerPortType | 0 | 0 | This object gives the port type of the optical interface. |