A2 value of the ASCU.
Parsed from file CISCO-ALPS-MIB.mib
Module: CISCO-ALPS-MIB
A2 value of the ASCU.
alpsAscuA2 OBJECT-TYPE
SYNTAX AlpsAscuA1A2Value
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A2 value of the ASCU."
View at oid-info.com
A2 value of the ASCU.
Parsed from file CISCO-ALPS-MIB.my.txt
Company: None
Module: CISCO-ALPS-MIB
A2 value of the ASCU.
alpsAscuA2 OBJECT-TYPE SYNTAX AlpsAscuA1A2Value MAX-ACCESS read-create STATUS current DESCRIPTION "A2 value of the ASCU." ::= { alpsAscuEntry 3 }
alpsAscuA2 OBJECT-TYPE SYNTAX AlpsAscuA1A2Value ACCESS read-write STATUS mandatory DESCRIPTION "A2 value of the ASCU." ::= { alpsAscuEntry 3 }
Automatically extracted from Cisco "SNMP v2 MIBs".
alpsAscuA2 OBJECT-TYPE SYNTAX AlpsAscuA1A2Value MAX-ACCESS read-create STATUS current DESCRIPTION "A2 value of the ASCU." ::= { alpsAscuEntry 3 }
alpsAscuA2 OBJECT-TYPE SYNTAX AlpsAscuA1A2Value MAX-ACCESS read-create STATUS current DESCRIPTION "A2 value of the ASCU." ::= { alpsAscuEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.95.1.5.1.1.1 | alpsAscuId | 0 | 0 | Specifies the ASCU Identifier and uniquely identifies an ASCU on a given interface. This value is the Interface Address (IA) for … |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.2 | alpsAscuA1 | 0 | 0 | A1 value of the ASCU. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.4 | alpsAscuCktName | 0 | 0 | Specifies the ALPS Circuit Name for the circuit that is to be used for this ASCU's data. Note that all ASCUs on a physical inter… |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.5 | alpsAscuAlarmsEnabled | 0 | 0 | Specifies whether alarms (syslog messages or SNMP traps) will be generated for this ASCU. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.6 | alpsAscuRetryOption | 0 | 0 | Specifies the retry option for this ASCU. This specifies the error message to be sent to the terminal when a message is dropped a… |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.7 | alpsAscuMaxMsgLength | 0 | 0 | Specifies Maximum length of Input Message that can be received from this ASCU. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.8 | alpsAscuFwdStatusOption | 0 | 0 | If this flag is set, status messages received from the ASCU are forwarded to the host. Otherwise they are discarded. Note that t… |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.9 | alpsAscuState | 0 | 0 | Reports the current ASCU Status. ASCUs are initially in disabled state. They are enabled from the parser if the operator wants to… |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.10 | alpsAscuDownReason | 0 | 0 | Reports the Down reason for this ASCU if it is down. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.11 | alpsAscuOutPackets | 0 | 0 | Number of packets transmitted to this ASCU. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.12 | alpsAscuOutOctets | 0 | 0 | Number of octets transmitted to this ASCU. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.13 | alpsAscuInPackets | 0 | 0 | Number of packets received from this ASCU |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.14 | alpsAscuInOctets | 0 | 0 | Number of octets received from this ASCU. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.15 | alpsAscuDropsGarbledPkts | 0 | 0 | The number of packets dropped due to the inability to properly decode them. Examples of garbled packets include packets with bad… |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.16 | alpsAscuDropsAscuDown | 0 | 0 | The number of packets dropped because the ASCU had previously been declared DOWN due to error thresholds being exceeded. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.17 | alpsAscuDropsAscuDisabled | 0 | 0 | The number of packets dropped because the ASCU had previously been declared to be in disabled state. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.18 | alpsAscuEnabled | 0 | 0 | Specifies whether the ASCU has been enabled or not. After the ASCU has been configured, it must be explicitly enabled to allow it… |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.19 | alpsAscuRowStatus | 0 | 0 | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.20 | alpsAscuAutoReset | 0 | 0 | Specifies whether a reset command will be automatically issued to any non-responsive ALC ASCUs. |