Reports the current ASCU Status. ASCUs are initially in
disabled state. They are enabled from the parser
if the operator wants to. This takes them to an UP state from which
they go to a DOWN state if there are too many errors.
Parsed from file CISCO-ALPS-MIB.mib
Module: CISCO-ALPS-MIB
Reports the current ASCU Status. ASCUs are initially in
disabled state. They are enabled from the parser
if the operator wants to. This takes them to an UP state from which
they go to a DOWN state if there are too many errors.
alpsAscuState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
unknown(2),
down(3),
up(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports the current ASCU Status. ASCUs are initially in
disabled state. They are enabled from the parser
if the operator wants to. This takes them to an UP state from which
they go to a DOWN state if there are too many errors. "
View at oid-info.com
Reports the current ASCU Status. ASCUs are initially in
disabled state. They are enabled from the parser
if the operator wants to. This takes them to an UP state from which
they go to a DOWN state if there are too many errors.
Parsed from file CISCO-ALPS-MIB.my.txt
Company: None
Module: CISCO-ALPS-MIB
Reports the current ASCU Status. ASCUs are initially in
disabled state. They are enabled from the parser
if the operator wants to. This takes them to an UP state from which
they go to a DOWN state if there are too many errors.
alpsAscuState OBJECT-TYPE SYNTAX INTEGER { disabled(1), unknown(2), down(3), up(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports the current ASCU Status. ASCUs are initially in disabled state. They are enabled from the parser if the operator wants to. This takes them to an UP state from which they go to a DOWN state if there are too many errors." ::= { alpsAscuEntry 9 }
alpsAscuState OBJECT-TYPE SYNTAX INTEGER { disabled(1), unknown(2), down(3), up(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Reports the current ASCU Status. ASCUs are initially in disabled state. They are enabled from the parser if the operator wants to. This takes them to an UP state from which they go to a DOWN state if there are too many errors." ::= { alpsAscuEntry 9 }
Automatically extracted from Cisco "SNMP v2 MIBs".
alpsAscuState OBJECT-TYPE SYNTAX INTEGER { disabled(1), unknown(2), down(3), up(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports the current ASCU Status. ASCUs are initially in disabled state. They are enabled from the parser if the operator wants to. This takes them to an UP state from which they go to a DOWN state if there are too many errors." ::= { alpsAscuEntry 9 }
alpsAscuState OBJECT-TYPE SYNTAX INTEGER { disabled(1), unknown(2), down(3), up(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports the current ASCU Status. ASCUs are initially in disabled state. They are enabled from the parser if the operator wants to. This takes them to an UP state from which they go to a DOWN state if there are too many errors." ::= { alpsAscuEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.95.1.5.1.1.1 | alpsAscuId | 0 | 0 | Specifies the ASCU Identifier and uniquely identifies an ASCU on a given interface. This value is the Interface Address (IA) for … |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.2 | alpsAscuA1 | 0 | 0 | A1 value of the ASCU. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.3 | alpsAscuA2 | 0 | 0 | A2 value of the ASCU. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.4 | alpsAscuCktName | 0 | 0 | Specifies the ALPS Circuit Name for the circuit that is to be used for this ASCU's data. Note that all ASCUs on a physical inter… |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.5 | alpsAscuAlarmsEnabled | 0 | 0 | Specifies whether alarms (syslog messages or SNMP traps) will be generated for this ASCU. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.6 | alpsAscuRetryOption | 0 | 0 | Specifies the retry option for this ASCU. This specifies the error message to be sent to the terminal when a message is dropped a… |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.7 | alpsAscuMaxMsgLength | 0 | 0 | Specifies Maximum length of Input Message that can be received from this ASCU. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.8 | alpsAscuFwdStatusOption | 0 | 0 | If this flag is set, status messages received from the ASCU are forwarded to the host. Otherwise they are discarded. Note that t… |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.10 | alpsAscuDownReason | 0 | 0 | Reports the Down reason for this ASCU if it is down. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.11 | alpsAscuOutPackets | 0 | 0 | Number of packets transmitted to this ASCU. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.12 | alpsAscuOutOctets | 0 | 0 | Number of octets transmitted to this ASCU. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.13 | alpsAscuInPackets | 0 | 0 | Number of packets received from this ASCU |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.14 | alpsAscuInOctets | 0 | 0 | Number of octets received from this ASCU. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.15 | alpsAscuDropsGarbledPkts | 0 | 0 | The number of packets dropped due to the inability to properly decode them. Examples of garbled packets include packets with bad… |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.16 | alpsAscuDropsAscuDown | 0 | 0 | The number of packets dropped because the ASCU had previously been declared DOWN due to error thresholds being exceeded. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.17 | alpsAscuDropsAscuDisabled | 0 | 0 | The number of packets dropped because the ASCU had previously been declared to be in disabled state. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.18 | alpsAscuEnabled | 0 | 0 | Specifies whether the ASCU has been enabled or not. After the ASCU has been configured, it must be explicitly enabled to allow it… |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.19 | alpsAscuRowStatus | 0 | 0 | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.9.9.95.1.5.1.1.20 | alpsAscuAutoReset | 0 | 0 | Specifies whether a reset command will be automatically issued to any non-responsive ALC ASCUs. |