This object is used to set up the query criterion for
the multicast flows of interest. If any one of the
defined BITs is set, then the value of the corresponding
object in the same row instance will be used for the search.
Specifically, if the 'source(0)' BIT is set, then the
cseFlowMcastQuerySrc object will be included in the
search criterion.
If the group(1) BIT is set, then the
cseFlowMcastQueryGrp object will be included in the
search criterion.
If the vlan(2) BIT is set, then the
cseFlowMcastQuerySrcVlan object will be included in the
search criterion.
If the router(3) BIT is set, then the
cseFlowMcastQueryRtrIndex object will be included in the
search criterion.
If the mvrf(4) BIT is set, then the
cseFlowMcastQueryMvrf object will be included in the
search criterion;
If the sourceip(5) BIT is set, then the
cseFlowMcastQueryAddrType and cseFlowMcastQuerySource
objects will be included in the search criterion.
If the groupip(6) BIT is set, then the
cseFlowMcastQueryAddrType and cseFlowMcastQueryGroup
objects will be included in the search criterion.
If the source(0) or group(1) BIT is set, then the
sourceip(5) or groupip(6) cannot be set, and vice-versa.
If any of the BITs in this variable is cleared, the
corresponding parameter object in the same row is
treated as a wildcard. When the row is instantiated,
the BITs in the variable will be cleared, and none of
query parameter objects in this row will be instantiated.
This will be considered as a wildcard search for flows
on the default Multicast Virtual Private Network (MVPN)
routing/forwarding (MVRF) instance.
i.e. it will return all rows corresponding
to all established multicast flow entries in the default
MVRF, in cseFlowMcastResultTable. The address type of this
wildcard search will be specified be cseFlowMcastQueryAddrType.
It is SNMP managers' responsibility to set certain
bits on in this object instance, if necessary,
and the corresponding flow parameter variables to the
appropriate values in order to setup the desired
query criteria.
The value of this object can not be altered when the
corresponding instance of cseFlowMcastQueryStatus is 'active'.
Parsed from file CISCO-SWITCH-ENGINE-MIB.mib
Module: CISCO-SWITCH-ENGINE-MIB
This object is used to set up the query criterion for
the multicast flows of interest. If any one of the
defined BITs is set, then the value of the corresponding
object in the same row instance will be used for the search.
Specifically, if the 'source(0)' BIT is set, then the
cseFlowMcastQuerySrc object will be included in the
search criterion.
If the group(1) BIT is set, then the
cseFlowMcastQueryGrp object will be included in the
search criterion.
If the vlan(2) BIT is set, then the
cseFlowMcastQuerySrcVlan object will be included in the
search criterion.
If the router(3) BIT is set, then the
cseFlowMcastQueryRtrIndex object will be included in the
search criterion.
If the mvrf(4) BIT is set, then the
cseFlowMcastQueryMvrf object will be included in the
search criterion;
If the sourceip(5) BIT is set, then the
cseFlowMcastQueryAddrType and cseFlowMcastQuerySource
objects will be included in the search criterion.
If the groupip(6) BIT is set, then the
cseFlowMcastQueryAddrType and cseFlowMcastQueryGroup
objects will be included in the search criterion.
If the source(0) or group(1) BIT is set, then the
sourceip(5) or groupip(6) cannot be set, and vice-versa.
If any of the BITs in this variable is cleared, the
corresponding parameter object in the same row is
treated as a wildcard. When the row is instantiated,
the BITs in the variable will be cleared, and none of
query parameter objects in this row will be instantiated.
This will be considered as a wildcard search for flows
on the default Multicast Virtual Private Network (MVPN)
routing/forwarding (MVRF) instance.
i.e. it will return all rows corresponding
to all established multicast flow entries in the default
MVRF, in cseFlowMcastResultTable. The address type of this
wildcard search will be specified be cseFlowMcastQueryAddrType.
It is SNMP managers' responsibility to set certain
bits on in this object instance, if necessary,
and the corresponding flow parameter variables to the
appropriate values in order to setup the desired
query criteria.
The value of this object can not be altered when the
corresponding instance of cseFlowMcastQueryStatus is 'active'.
This object is used to set up the query criterion for
the multicast flows of interest. If any one of the
defined BITs is set, then the value of the corresponding
object in the same row instance will be used for the search.
Specifically, if the 'source(0)' BIT is set, then the
cseFlowMcastQuerySrc object will be included in the
search criterion.
If the group(1) BIT is set, then the
cseFlowMcastQueryGrp object will be included in the
search criterion.
If the vlan(2) BIT is set, then the
cseFlowMcastQuerySrcVlan object will be included in the
search criterion.
If the router(3) BIT is set, then the
cseFlowMcastQueryRtrIndex object will be included in the
search criterion.
If the mvrf(4) BIT is set, then the
cseFlowMcastQueryMvrf object will be included in the
search criterion;
If the sourceip(5) BIT is set, then the
cseFlowMcastQueryAddrType and cseFlowMcastQuerySource
objects will be included in the search criterion.
If the groupip(6) BIT is set, then the
cseFlowMcastQueryAddrType and cseFlowMcastQueryGroup
objects will be included in the search criterion.
If the source(0) or group(1) BIT is set, then the
sourceip(5) or groupip(6) cannot be set, and vice-versa.
If any of the BITs in this variable is cleared, the
corresponding parameter object in the same row is
treated as a wildcard. When the row is instantiated,
the BITs in the variable will be cleared, and none of
query parameter objects in this row will be instantiated.
This will be considered as a wildcard search for flows
on the default Multicast Virtual Private Network (MVPN)
routing/forwarding (MVRF) instance.
i.e. it will return all rows corresponding
to all established multicast flow entries in the default
MVRF, in cseFlowMcastResultTable. The address type of this
wildcard search will be specified be cseFlowMcastQueryAddrType.
It is SNMP managers' responsibility to set certain
bits on in this object instance, if necessary,
and the corresponding flow parameter variables to the
appropriate values in order to setup the desired
query criteria.
The value of this object can not be altered when the
corresponding instance of cseFlowMcastQueryStatus is 'active'.
Parsed from file CISCO-SWITCH-ENGINE-MIB.my.txt
Company: None
Module: CISCO-SWITCH-ENGINE-MIB
This object is used to set up the query criterion for
the multicast flows of interest. If any one of the
defined BITs is set, then the value of the corresponding
object in the same row instance will be used for the search.
Specifically, if the 'source(0)' BIT is set, then the
cseFlowMcastQuerySrc object will be included in the
search criterion.
If the group(1) BIT is set, then the
cseFlowMcastQueryGrp object will be included in the
search criterion.
If the vlan(2) BIT is set, then the
cseFlowMcastQuerySrcVlan object will be included in the
search criterion.
If the router(3) BIT is set, then the
cseFlowMcastQueryRtrIndex object will be included in the
search criterion.
If the mvrf(4) BIT is set, then the
cseFlowMcastQueryMvrf object will be included in the
search criterion;
If the sourceip(5) BIT is set, then the
cseFlowMcastQueryAddrType and cseFlowMcastQuerySource
objects will be included in the search criterion.
If the groupip(6) BIT is set, then the
cseFlowMcastQueryAddrType and cseFlowMcastQueryGroup
objects will be included in the search criterion.
If the source(0) or group(1) BIT is set, then the
sourceip(5) or groupip(6) cannot be set, and vice-versa.
If any of the BITs in this variable is cleared, the
corresponding parameter object in the same row is
treated as a wildcard. When the row is instantiated,
the BITs in the variable will be cleared, and none of
query parameter objects in this row will be instantiated.
This will be considered as a wildcard search for flows
on the default Multicast Virtual Private Network (MVPN)
routing/forwarding (MVRF) instance.
i.e. it will return all rows corresponding
to all established multicast flow entries in the default
MVRF, in cseFlowMcastResultTable. The address type of this
wildcard search will be specified be cseFlowMcastQueryAddrType.
It is SNMP managers' responsibility to set certain
bits on in this object instance, if necessary,
and the corresponding flow parameter variables to the
appropriate values in order to setup the desired
query criteria.
The value of this object can not be altered when the
corresponding instance of cseFlowMcastQueryStatus is 'active'.
cseFlowMcastQueryMask OBJECT-TYPE SYNTAX BITS { source(0), group(1), vlan(2), router(3), mvrf(4), sourceip(5), groupip(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set up the query criterion for the multicast flows of interest. If any one of the defined BITs is set, then the value of the corresponding object in the same row instance will be used for the search. Specifically, if the 'source(0)' BIT is set, then the cseFlowMcastQuerySrc object will be included in the search criterion. If the group(1) BIT is set, then the cseFlowMcastQueryGrp object will be included in the search criterion. If the vlan(2) BIT is set, then the cseFlowMcastQuerySrcVlan object will be included in the search criterion. If the router(3) BIT is set, then the cseFlowMcastQueryRtrIndex object will be included in the search criterion. If the mvrf(4) BIT is set, then the cseFlowMcastQueryMvrf object will be included in the search criterion; If the sourceip(5) BIT is set, then the cseFlowMcastQueryAddrType and cseFlowMcastQuerySource objects will be included in the search criterion. If the groupip(6) BIT is set, then the cseFlowMcastQueryAddrType and cseFlowMcastQueryGroup objects will be included in the search criterion. If the source(0) or group(1) BIT is set, then the sourceip(5) or groupip(6) cannot be set, and vice-versa. If any of the BITs in this variable is cleared, the corresponding parameter object in the same row is treated as a wildcard. When the row is instantiated, the BITs in the variable will be cleared, and none of query parameter objects in this row will be instantiated. This will be considered as a wildcard search for flows on the default Multicast Virtual Private Network (MVPN) routing/forwarding (MVRF) instance. i.e. it will return all rows corresponding to all established multicast flow entries in the default MVRF, in cseFlowMcastResultTable. The address type of this wildcard search will be specified be cseFlowMcastQueryAddrType. It is SNMP managers' responsibility to set certain bits on in this object instance, if necessary, and the corresponding flow parameter variables to the appropriate values in order to setup the desired query criteria. The value of this object can not be altered when the corresponding instance of cseFlowMcastQueryStatus is 'active'." DEFVAL { { } } ::= { cseFlowMcastQueryEntry 2 }
cseFlowMcastQueryMask OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to set up the query criterion for the multicast flows of interest. If any one of the defined BITs is set, then the value of the corresponding object in the same row instance will be used for the search. Specifically, if the 'source(0)' BIT is set, then the cseFlowMcastQuerySrc object will be included in the search criterion. If the group(1) BIT is set, then the cseFlowMcastQueryGrp object will be included in the search criterion. If the vlan(2) BIT is set, then the cseFlowMcastQuerySrcVlan object will be included in the search criterion. If the router(3) BIT is set, then the cseFlowMcastQueryRtrIndex object will be included in the search criterion. If the mvrf(4) BIT is set, then the cseFlowMcastQueryMvrf object will be included in the search criterion; If the sourceip(5) BIT is set, then the cseFlowMcastQueryAddrType and cseFlowMcastQuerySource objects will be included in the search criterion. If the groupip(6) BIT is set, then the cseFlowMcastQueryAddrType and cseFlowMcastQueryGroup objects will be included in the search criterion. If the source(0) or group(1) BIT is set, then the sourceip(5) or groupip(6) cannot be set, and vice-versa. If any of the BITs in this variable is cleared, the corresponding parameter object in the same row is treated as a wildcard. When the row is instantiated, the BITs in the variable will be cleared, and none of query parameter objects in this row will be instantiated. This will be considered as a wildcard search for flows on the default Multicast Virtual Private Network (MVPN) routing/forwarding (MVRF) instance. i.e. it will return all rows corresponding to all established multicast flow entries in the default MVRF, in cseFlowMcastResultTable. The address type of this wildcard search will be specified be cseFlowMcastQueryAddrType. It is SNMP managers' responsibility to set certain bits on in this object instance, if necessary, and the corresponding flow parameter variables to the appropriate values in order to setup the desired query criteria. The value of this object can not be altered when the corresponding instance of cseFlowMcastQueryStatus is 'active'." DEFVAL { '00'h } ::= { cseFlowMcastQueryEntry 2 }
Vendor: Cisco
Module: CISCO-SWITCH-ENGINE-MIB
[Automatically extracted from oidview.com]
cseFlowMcastQueryMask OBJECT-TYPE SYNTAX BITS { source(0), group(1), vlan(2), router(3), mvrf(4), sourceip(5), groupip(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set up the query criterion for the multicast flows of interest. If any one of the defined BITs is set, then the value of the corresponding object in the same row instance will be used for the search. Specifically, if the 'source(0)' BIT is set, then the cseFlowMcastQuerySrc object will be included in the search criterion. If the group(1) BIT is set, then the cseFlowMcastQueryGrp object will be included in the search criterion. If the vlan(2) BIT is set, then the cseFlowMcastQuerySrcVlan object will be included in the search criterion. If the router(3) BIT is set, then the cseFlowMcastQueryRtrIndex object will be included in the search criterion. If the mvrf(4) BIT is set, then the cseFlowMcastQueryMvrf object will be included in the search criterion; If the sourceip(5) BIT is set, then the cseFlowMcastQueryAddrType and cseFlowMcastQuerySource objects will be included in the search criterion. If the groupip(6) BIT is set, then the cseFlowMcastQueryAddrType and cseFlowMcastQueryGroup objects will be included in the search criterion. If the source(0) or group(1) BIT is set, then the sourceip(5) or groupip(6) cannot be set, and vice-versa. If any of the BITs in this variable is cleared, the corresponding parameter object in the same row is treated as a wildcard. When the row is instantiated, the BITs in the variable will be cleared, and none of query parameter objects in this row will be instantiated. This will be considered as a wildcard search for flows on the default Multicast Virtual Private Network (MVPN) routing/forwarding (MVRF) instance. i.e. it will return all rows corresponding to all established multicast flow entries in the default MVRF, in cseFlowMcastResultTable. The address type of this wildcard search will be specified be cseFlowMcastQueryAddrType. It is SNMP managers' responsibility to set certain bits on in this object instance, if necessary, and the corresponding flow parameter variables to the appropriate values in order to setup the desired query criteria. The value of this object can not be altered when the corresponding instance of cseFlowMcastQueryStatus is 'active'." DEFVAL { { } } ::= { cseFlowMcastQueryEntry 2 }
cseFlowMcastQueryMask OBJECT-TYPE SYNTAX BITS { source(0), group(1), vlan(2), router(3), mvrf(4), sourceip(5), groupip(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set up the query criterion for the multicast flows of interest. If any one of the defined BITs is set, then the value of the corresponding object in the same row instance will be used for the search. Specifically, if the 'source(0)' BIT is set, then the cseFlowMcastQuerySrc object will be included in the search criterion. If the group(1) BIT is set, then the cseFlowMcastQueryGrp object will be included in the search criterion. If the vlan(2) BIT is set, then the cseFlowMcastQuerySrcVlan object will be included in the search criterion. If the router(3) BIT is set, then the cseFlowMcastQueryRtrIndex object will be included in the search criterion. If the mvrf(4) BIT is set, then the cseFlowMcastQueryMvrf object will be included in the search criterion; If the sourceip(5) BIT is set, then the cseFlowMcastQueryAddrType and cseFlowMcastQuerySource objects will be included in the search criterion. If the groupip(6) BIT is set, then the cseFlowMcastQueryAddrType and cseFlowMcastQueryGroup objects will be included in the search criterion. If the source(0) or group(1) BIT is set, then the sourceip(5) or groupip(6) cannot be set, and vice-versa. If any of the BITs in this variable is cleared, the corresponding parameter object in the same row is treated as a wildcard. When the row is instantiated, the BITs in the variable will be cleared, and none of query parameter objects in this row will be instantiated. This will be considered as a wildcard search for flows on the default Multicast Virtual Private Network (MVPN) routing/forwarding (MVRF) instance. i.e. it will return all rows corresponding to all established multicast flow entries in the default MVRF, in cseFlowMcastResultTable. The address type of this wildcard search will be specified be cseFlowMcastQueryAddrType. It is SNMP managers' responsibility to set certain bits on in this object instance, if necessary, and the corresponding flow parameter variables to the appropriate values in order to setup the desired query criteria. The value of this object can not be altered when the corresponding instance of cseFlowMcastQueryStatus is 'active'." DEFVAL { { } } ::= { cseFlowMcastQueryEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.97.1.2.12.1.1 | cseFlowMcastQueryIndex | 0 | 0 | An arbitrary integer in the range of 1 to cseFlowMcastMaxQueries to identify this control query. |
| 1.3.6.1.4.1.9.9.97.1.2.12.1.3 | cseFlowMcastQuerySrc | 0 | 0 | The source address of the IP multicast layer 3 flows. This object should be instantiated and assigned a proper IP address wheneve… |
| 1.3.6.1.4.1.9.9.97.1.2.12.1.4 | cseFlowMcastQueryGrp | 0 | 0 | The IP multicast group address of the queried flows. This object should be instantiated and set whenever the 'group' bit of the a… |
| 1.3.6.1.4.1.9.9.97.1.2.12.1.5 | cseFlowMcastQuerySrcVlan | 0 | 0 | The source Vlan ID of the IP multicast layer 3 flows. This object should be instantiated and set whenever the 'vlan' bit of the a… |
| 1.3.6.1.4.1.9.9.97.1.2.12.1.6 | cseFlowMcastQueryRtrIndex | 0 | 0 | Index of the router for which the multicast flows are available, that is the flows would be replicated and routed by the specifie… |
| 1.3.6.1.4.1.9.9.97.1.2.12.1.7 | cseFlowMcastQuerySkipNFlows | 0 | 0 | The number of searched flows to be skipped before storing any multicast flows in cseFlowMcastResultTable. This object can be used… |
| 1.3.6.1.4.1.9.9.97.1.2.12.1.8 | cseFlowMcastQueryOwner | 0 | 0 | The manager entity that configured this entry and is therefore using the resources assigned to it. It is used to model an admini… |
| 1.3.6.1.4.1.9.9.97.1.2.12.1.9 | cseFlowMcastQueryTotalFlows | 0 | 0 | The number of flows matching the query criterion. |
| 1.3.6.1.4.1.9.9.97.1.2.12.1.10 | cseFlowMcastQueryRows | 0 | 0 | Indicating the status of the query by following values: -1 - Either the query has not been started or the agent is still processi… |
| 1.3.6.1.4.1.9.9.97.1.2.12.1.11 | cseFlowMcastQueryStatus | 0 | 0 | The status object used to manage rows in this table. When set to 'active', the query of flows is initiated. This object can be se… |
| 1.3.6.1.4.1.9.9.97.1.2.12.1.12 | cseFlowMcastQueryCreateTime | 0 | 0 | Time when this query was last set to active. |
| 1.3.6.1.4.1.9.9.97.1.2.12.1.13 | cseFlowMcastQueryMvrf | 0 | 0 | The human-readable name of the Multicast Virtual Private Network (MVPN) routing/forwarding instance (MVRF). When the 'mvrf' bit o… |
| 1.3.6.1.4.1.9.9.97.1.2.12.1.14 | cseFlowMcastQueryAddrType | 0 | 0 | The Internet address type for this multicast search query. |
| 1.3.6.1.4.1.9.9.97.1.2.12.1.15 | cseFlowMcastQuerySource | 0 | 0 | The source Internet address of the IP multicast layer 3 flows. When the 'sourceip' bit of cseFlowMcastQueryMask cseFlowMcastQuery… |
| 1.3.6.1.4.1.9.9.97.1.2.12.1.16 | cseFlowMcastQueryGroup | 0 | 0 | The multicast group Internet address of the queried flows. When the 'mvrf' bit of cseFlowMcastQueryMask object in the same row is… |