This MIB module defines management objects for Cisco Layer 2/3
switches. These devices may either have a single (central) switching
engine entity or may consist of multiple (distributed) switching
engine entities which are inter-connected via a common 'switching
fabric'. In the central switching engine model, all the physical
ports in the system are handled by the only switching engine in the
system. In the distributed switching model, each switching engine
will handle a set of 'local' physical ports and when necessary,
packets are also switched between switching engines over the
switching fabric.
Cisco L2/L3 switching devices use regular routers to assist them
in learning packet 'flows' by observing how a router routes a
candidate flow. A flow is some combination of source network address,
destination network address and the transport port numbers, as
applicable. Once a flow is established (learned), all traffic
belonging to that flow will be switched at Layer 3 by the switch
engine, effectively bypassing the router, until the flow has been
'aged' out. Most Cisco L2/L3 switching devices employ built-in
(internal) router module(s) for integrating Layer 3 switching with
Layer 2 forwarding. However, they can also learn 'flows' through
other physically-separate (external) Cisco routers that are
connected to the switch-engine through the network.
Parsed from file CISCO-SWITCH-ENGINE-MIB.mib
Module: CISCO-SWITCH-ENGINE-MIB
This MIB module defines management objects for Cisco Layer 2/3
switches. These devices may either have a single (central) switching
engine entity or may consist of multiple (distributed) switching
engine entities which are inter-connected via a common 'switching
fabric'. In the central switching engine model, all the physical
ports in the system are handled by the only switching engine in the
system. In the distributed switching model, each switching engine
will handle a set of 'local' physical ports and when necessary,
packets are also switched between switching engines over the
switching fabric.
Cisco L2/L3 switching devices use regular routers to assist them
in learning packet 'flows' by observing how a router routes a
candidate flow. A flow is some combination of source network address,
destination network address and the transport port numbers, as
applicable. Once a flow is established (learned), all traffic
belonging to that flow will be switched at Layer 3 by the switch
engine, effectively bypassing the router, until the flow has been
'aged' out. Most Cisco L2/L3 switching devices employ built-in
(internal) router module(s) for integrating Layer 3 switching with
Layer 2 forwarding. However, they can also learn 'flows' through
other physically-separate (external) Cisco routers that are
connected to the switch-engine through the network.
Parsed from file CISCO-SWITCH-ENGINE-MIB.my.txt
Company: None
Module: CISCO-SWITCH-ENGINE-MIB
This MIB module defines management objects for Cisco Layer 2/3
switches. These devices may either have a single (central) switching
engine entity or may consist of multiple (distributed) switching
engine entities which are inter-connected via a common 'switching
fabric'. In the central switching engine model, all the physical
ports in the system are handled by the only switching engine in the
system. In the distributed switching model, each switching engine
will handle a set of 'local' physical ports and when necessary,
packets are also switched between switching engines over the
switching fabric.
Cisco L2/L3 switching devices use regular routers to assist them
in learning packet 'flows' by observing how a router routes a
candidate flow. A flow is some combination of source network address,
destination network address and the transport port numbers, as
applicable. Once a flow is established (learned), all traffic
belonging to that flow will be switched at Layer 3 by the switch
engine, effectively bypassing the router, until the flow has been
'aged' out. Most Cisco L2/L3 switching devices employ built-in
(internal) router module(s) for integrating Layer 3 switching with
Layer 2 forwarding. However, they can also learn 'flows' through
other physically-separate (external) Cisco routers that are
connected to the switch-engine through the network.
ciscoSwitchEngineMIB MODULE-IDENTITY LAST-UPDATED "200811110000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module defines management objects for Cisco Layer 2/3 switches. These devices may either have a single (central) switching engine entity or may consist of multiple (distributed) switching engine entities which are inter-connected via a common 'switching fabric'. In the central switching engine model, all the physical ports in the system are handled by the only switching engine in the system. In the distributed switching model, each switching engine will handle a set of 'local' physical ports and when necessary, packets are also switched between switching engines over the switching fabric. Cisco L2/L3 switching devices use regular routers to assist them in learning packet 'flows' by observing how a router routes a candidate flow. A flow is some combination of source network address, destination network address and the transport port numbers, as applicable. Once a flow is established (learned), all traffic belonging to that flow will be switched at Layer 3 by the switch engine, effectively bypassing the router, until the flow has been 'aged' out. Most Cisco L2/L3 switching devices employ built-in (internal) router module(s) for integrating Layer 3 switching with Layer 2 forwarding. However, they can also learn 'flows' through other physically-separate (external) Cisco routers that are connected to the switch-engine through the network." REVISION "200811110000Z" DESCRIPTION "Add new enumerations to cseTcamResourceType." REVISION "200801290000Z" DESCRIPTION "Add cseL3SwitchedPktsPerSecGroup. Add cseCacheStatisticsGroup. Add new enumerations to cseTcamResourceType. Add new enumerations to cseFlowIPFlowMask object." REVISION "200509160000Z" DESCRIPTION "Add cseFlowMcastMgmtGroup2. Deprecate the objects: cseFlowMcastQuerySrc, cseFlowMcastQueryGrp, cseFlowMcastResultGrp, cseFlowMcastResultSrc. Add new enumerations to cseFlowMcastQueryMask." REVISION "200504120000Z" DESCRIPTION "Add new enumerations to cseFlowIPFlowMask object. Add ingressInterfaceMapping and egressInterfaceMapping enumerations to cseTcamResourceType object." REVISION "200411150000Z" DESCRIPTION "Add cseMetUsageGroup." REVISION "200406090000Z" DESCRIPTION "Add the following Groups: cseNetflowASInfoExportGroup cseNetflowPerVlanIfGroup" REVISION "200311070000Z" DESCRIPTION "Add cseErrorStatsLCTable." REVISION "200308200000Z" DESCRIPTION "Add the following tables to support forwarding information base: cseCefFibTable, cseCefAdjacencyTable. Add the following table to support TCAM (Ternary Content Addressable Memory) resource usage: cseTcamUsageTable. Add default value for the following objects: cseFlowQuerySource, cseFlowQuerySourceMask, cseFlowQueryDestination, cseFlowQueryDestinationMask, cseFlowQueryOwner." REVISION "200306100000Z" DESCRIPTION "Deprecated the objects: cseNetflowLSExportHost, cseNetflowLSExportTransportNumber" REVISION "200305060000Z" DESCRIPTION "Added the object cseFlowQuerySkipNFlows" REVISION "200302210000Z" DESCRIPTION "Added the following objects and table: cseFlowLongAgingTime, cseNetFlowIfIndexEnable, cseFlowStatsTable, cseFlowExcludeTable. Modified the description of the following objects: cseL2IpPkts, cseL2IpxPkts, cseL2AssignedProtoPkts, cseL2OtherProtoPkts, cseL2HCIpPkts, cseL2HCIpxPkts, cseL2HCAssignedProtoPkts, cseL2HCOtherProtoPkts." REVISION "200208050000Z" DESCRIPTION "Added the following objects: cseFlowIPFlowMask, cseFlowIPXFlowMask, cseProtocolFilterEnable." REVISION "200202070000Z" DESCRIPTION "Added the objects in cseBridgedFlowStatsCtrlTable and cseErrorStatsTable. Added the following objects: cseL3VlanInUnicastPkts cseL3VlanInUnicastOctets cseL3VlanOutUnicastPkts cseL3VlanOutUnicastOctets." REVISION "200110260000Z" DESCRIPTION "Added the object cseFlowQueryTotalFlows" REVISION "200109130000Z" DESCRIPTION "Added the follwowing objects o cseNetflowLSFilterSupport o cseNetflowLSFilterTable. Also created the new groups o cseNDEMandatoryGroup o cseNDESingleFilterGroup o cseNDEMultipleFiltersGroup" REVISION "200105160000Z" DESCRIPTION "Added 4k Vlan support" REVISION "200103090000Z" DESCRIPTION "Update the range of cseFlowEstablishedAgingTime, cseFlowIPXEstablishedAgingTime, cseFlowOperEstablishedAgingTime, cseFlowOperIPXAgingTime. Replace cseFlowQueryResult with cseFlowQueryResultingRows." REVISION "200006230000Z" DESCRIPTION "Added the following objects: o cseFlowOperEstablishedAgingTime. o cseFlowOperFastAgingTime. o cseFlowOperFastAgePktThreshold. o cseFlowOperIPXAgingTime." REVISION "200001311130Z" DESCRIPTION "Added one High Capacity L2 Statistics table, an extension of cseL2StatsTable and new objects in NetflowLS group for new netflow export features. Also added a new enum type of cseRouterFlowMask to support L3 multicast." REVISION "9912091130Z" DESCRIPTION "Added MIB objects to manage Switch Engine (SE) portion of Multicast MLS control protocol." REVISION "9806241130Z" DESCRIPTION "Added 2 groups, for the purging (clearing) of layer 3 unicast and multicast flow entries stored in the cache. Also added new objects for layer 3 flow statistics." REVISION "9805281130Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 97 }
ciscoSwitchEngineMIB OBJECT IDENTIFIER ::= { ciscoMgmt 97 }
Vendor: Cisco
Module: CISCO-SWITCH-ENGINE-MIB
[Automatically extracted from oidview.com]
ciscoSwitchEngineMIB MODULE-IDENTITY LAST-UPDATED "201012170000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module defines management objects for Cisco Layer 2/3 switches. These devices may either have a single (central) switching engine entity or may consist of multiple (distributed) switching engine entities which are inter-connected via a common 'switching fabric'. In the central switching engine model, all the physical ports in the system are handled by the only switching engine in the system. In the distributed switching model, each switching engine will handle a set of 'local' physical ports and when necessary, packets are also switched between switching engines over the switching fabric. Cisco L2/L3 switching devices use regular routers to assist them in learning packet 'flows' by observing how a router routes a candidate flow. A flow is some combination of source network address, destination network address and the transport port numbers, as applicable. Once a flow is established (learned), all traffic belonging to that flow will be switched at Layer 3 by the switch engine, effectively bypassing the router, until the flow has been 'aged' out. Most Cisco L2/L3 switching devices employ built-in (internal) router module(s) for integrating Layer 3 switching with Layer 2 forwarding. However, they can also learn 'flows' through other physically-separate (external) Cisco routers that are connected to the switch-engine through the network." REVISION "201012170000Z" DESCRIPTION "Add the following new enumerations to cseTcamResourceType: dgtSgtRegion(31), anyAnyRegion(32), tcamALabel(33), tcamBLabel(34), destInfoIn(35) and destInfoOut(36)." REVISION "200811110000Z" DESCRIPTION "Add new enumerations to cseTcamResourceType." REVISION "200801290000Z" DESCRIPTION "Add cseL3SwitchedPktsPerSecGroup. Add cseCacheStatisticsGroup. Add new enumerations to cseTcamResourceType. Add new enumerations to cseFlowIPFlowMask object." REVISION "200509160000Z" DESCRIPTION "Add cseFlowMcastMgmtGroup2. Deprecate the objects: cseFlowMcastQuerySrc, cseFlowMcastQueryGrp, cseFlowMcastResultGrp, cseFlowMcastResultSrc. Add new enumerations to cseFlowMcastQueryMask." REVISION "200504120000Z" DESCRIPTION "Add new enumerations to cseFlowIPFlowMask object. Add ingressInterfaceMapping and egressInterfaceMapping enumerations to cseTcamResourceType object." REVISION "200411150000Z" DESCRIPTION "Add cseMetUsageGroup." REVISION "200406090000Z" DESCRIPTION "Add the following Groups: cseNetflowASInfoExportGroup cseNetflowPerVlanIfGroup" REVISION "200311070000Z" DESCRIPTION "Add cseErrorStatsLCTable." REVISION "200308200000Z" DESCRIPTION "Add the following tables to support forwarding information base: cseCefFibTable, cseCefAdjacencyTable. Add the following table to support TCAM (Ternary Content Addressable Memory) resource usage: cseTcamUsageTable. Add default value for the following objects: cseFlowQuerySource, cseFlowQuerySourceMask, cseFlowQueryDestination, cseFlowQueryDestinationMask, cseFlowQueryOwner." REVISION "200306100000Z" DESCRIPTION "Deprecated the objects: cseNetflowLSExportHost, cseNetflowLSExportTransportNumber" REVISION "200305060000Z" DESCRIPTION "Added the object cseFlowQuerySkipNFlows" REVISION "200302210000Z" DESCRIPTION "Added the following objects and table: cseFlowLongAgingTime, cseNetFlowIfIndexEnable, cseFlowStatsTable, cseFlowExcludeTable. Modified the description of the following objects: cseL2IpPkts, cseL2IpxPkts, cseL2AssignedProtoPkts, cseL2OtherProtoPkts, cseL2HCIpPkts, cseL2HCIpxPkts, cseL2HCAssignedProtoPkts, cseL2HCOtherProtoPkts." REVISION "200208050000Z" DESCRIPTION "Added the following objects: cseFlowIPFlowMask, cseFlowIPXFlowMask, cseProtocolFilterEnable." REVISION "200202070000Z" DESCRIPTION "Added the objects in cseBridgedFlowStatsCtrlTable and cseErrorStatsTable. Added the following objects: cseL3VlanInUnicastPkts cseL3VlanInUnicastOctets cseL3VlanOutUnicastPkts cseL3VlanOutUnicastOctets." REVISION "200110260000Z" DESCRIPTION "Added the object cseFlowQueryTotalFlows" REVISION "200109130000Z" DESCRIPTION "Added the follwowing objects o cseNetflowLSFilterSupport o cseNetflowLSFilterTable. Also created the new groups o cseNDEMandatoryGroup o cseNDESingleFilterGroup o cseNDEMultipleFiltersGroup" REVISION "200105160000Z" DESCRIPTION "Added 4k Vlan support" REVISION "200103090000Z" DESCRIPTION "Update the range of cseFlowEstablishedAgingTime, cseFlowIPXEstablishedAgingTime, cseFlowOperEstablishedAgingTime, cseFlowOperIPXAgingTime. Replace cseFlowQueryResult with cseFlowQueryResultingRows." REVISION "200006230000Z" DESCRIPTION "Added the following objects: o cseFlowOperEstablishedAgingTime. o cseFlowOperFastAgingTime. o cseFlowOperFastAgePktThreshold. o cseFlowOperIPXAgingTime." REVISION "200001311130Z" DESCRIPTION "Added one High Capacity L2 Statistics table, an extension of cseL2StatsTable and new objects in NetflowLS group for new netflow export features. Also added a new enum type of cseRouterFlowMask to support L3 multicast." REVISION "9912091130Z" DESCRIPTION "Added MIB objects to manage Switch Engine (SE) portion of Multicast MLS control protocol." REVISION "9806241130Z" DESCRIPTION "Added 2 groups, for the purging (clearing) of layer 3 unicast and multicast flow entries stored in the cache. Also added new objects for layer 3 flow statistics." REVISION "9805281130Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 97 }
ciscoSwitchEngineMIB MODULE-IDENTITY LAST-UPDATED "201302130000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module defines management objects for Cisco Layer 2/3 switches. These devices may either have a single (central) switching engine entity or may consist of multiple (distributed) switching engine entities which are inter-connected via a common 'switching fabric'. In the central switching engine model, all the physical ports in the system are handled by the only switching engine in the system. In the distributed switching model, each switching engine will handle a set of 'local' physical ports and when necessary, packets are also switched between switching engines over the switching fabric. Cisco L2/L3 switching devices use regular routers to assist them in learning packet 'flows' by observing how a router routes a candidate flow. A flow is some combination of source network address, destination network address and the transport port numbers, as applicable. Once a flow is established (learned), all traffic belonging to that flow will be switched at Layer 3 by the switch engine, effectively bypassing the router, until the flow has been 'aged' out. Most Cisco L2/L3 switching devices employ built-in (internal) router module(s) for integrating Layer 3 switching with Layer 2 forwarding. However, they can also learn 'flows' through other physically-separate (external) Cisco routers that are connected to the switch-engine through the network." REVISION "201302130000Z" DESCRIPTION "Add enumerated value 37 - 85 to cseTcamResourceType." REVISION "201203120000Z" DESCRIPTION "Add cseStatisticsFlowGroup1." REVISION "201012170000Z" DESCRIPTION "Add the following new enumerations to cseTcamResourceType: dgtSgtRegion(31), anyAnyRegion(32), tcamALabel(33), tcamBLabel(34), destInfoIn(35) and destInfoOut(36)." REVISION "200811110000Z" DESCRIPTION "Add new enumerations to cseTcamResourceType." REVISION "200801290000Z" DESCRIPTION "Add cseL3SwitchedPktsPerSecGroup. Add cseCacheStatisticsGroup. Add new enumerations to cseTcamResourceType. Add new enumerations to cseFlowIPFlowMask object." REVISION "200509160000Z" DESCRIPTION "Add cseFlowMcastMgmtGroup2. Deprecate the objects: cseFlowMcastQuerySrc, cseFlowMcastQueryGrp, cseFlowMcastResultGrp, cseFlowMcastResultSrc. Add new enumerations to cseFlowMcastQueryMask." REVISION "200504120000Z" DESCRIPTION "Add new enumerations to cseFlowIPFlowMask object. Add ingressInterfaceMapping and egressInterfaceMapping enumerations to cseTcamResourceType object." REVISION "200411150000Z" DESCRIPTION "Add cseMetUsageGroup." REVISION "200406090000Z" DESCRIPTION "Add the following Groups: cseNetflowASInfoExportGroup cseNetflowPerVlanIfGroup" REVISION "200311070000Z" DESCRIPTION "Add cseErrorStatsLCTable." REVISION "200308200000Z" DESCRIPTION "Add the following tables to support forwarding information base: cseCefFibTable, cseCefAdjacencyTable. Add the following table to support TCAM (Ternary Content Addressable Memory) resource usage: cseTcamUsageTable. Add default value for the following objects: cseFlowQuerySource, cseFlowQuerySourceMask, cseFlowQueryDestination, cseFlowQueryDestinationMask, cseFlowQueryOwner." REVISION "200306100000Z" DESCRIPTION "Deprecated the objects: cseNetflowLSExportHost, cseNetflowLSExportTransportNumber" REVISION "200305060000Z" DESCRIPTION "Added the object cseFlowQuerySkipNFlows" REVISION "200302210000Z" DESCRIPTION "Added the following objects and table: cseFlowLongAgingTime, cseNetFlowIfIndexEnable, cseFlowStatsTable, cseFlowExcludeTable. Modified the description of the following objects: cseL2IpPkts, cseL2IpxPkts, cseL2AssignedProtoPkts, cseL2OtherProtoPkts, cseL2HCIpPkts, cseL2HCIpxPkts, cseL2HCAssignedProtoPkts, cseL2HCOtherProtoPkts." REVISION "200208050000Z" DESCRIPTION "Added the following objects: cseFlowIPFlowMask, cseFlowIPXFlowMask, cseProtocolFilterEnable." REVISION "200202070000Z" DESCRIPTION "Added the objects in cseBridgedFlowStatsCtrlTable and cseErrorStatsTable. Added the following objects: cseL3VlanInUnicastPkts cseL3VlanInUnicastOctets cseL3VlanOutUnicastPkts cseL3VlanOutUnicastOctets." REVISION "200110260000Z" DESCRIPTION "Added the object cseFlowQueryTotalFlows" REVISION "200109130000Z" DESCRIPTION "Added the follwowing objects o cseNetflowLSFilterSupport o cseNetflowLSFilterTable. Also created the new groups o cseNDEMandatoryGroup o cseNDESingleFilterGroup o cseNDEMultipleFiltersGroup" REVISION "200105160000Z" DESCRIPTION "Added 4k Vlan support" REVISION "200103090000Z" DESCRIPTION "Update the range of cseFlowEstablishedAgingTime, cseFlowIPXEstablishedAgingTime, cseFlowOperEstablishedAgingTime, cseFlowOperIPXAgingTime. Replace cseFlowQueryResult with cseFlowQueryResultingRows." REVISION "200006230000Z" DESCRIPTION "Added the following objects: o cseFlowOperEstablishedAgingTime. o cseFlowOperFastAgingTime. o cseFlowOperFastAgePktThreshold. o cseFlowOperIPXAgingTime." REVISION "200001311130Z" DESCRIPTION "Added one High Capacity L2 Statistics table, an extension of cseL2StatsTable and new objects in NetflowLS group for new netflow export features. Also added a new enum type of cseRouterFlowMask to support L3 multicast." REVISION "9912091130Z" DESCRIPTION "Added MIB objects to manage Switch Engine (SE) portion of Multicast MLS control protocol." REVISION "9806241130Z" DESCRIPTION "Added 2 groups, for the purging (clearing) of layer 3 unicast and multicast flow entries stored in the cache. Also added new objects for layer 3 flow statistics." REVISION "9805281130Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 97 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.97.1 | cseMIBObjects | 10 | 332 | None |
| 1.3.6.1.4.1.9.9.97.2 | cseMIBNotifications | 0 | 0 | None |
| 1.3.6.1.4.1.9.9.97.3 | cseMIBConformance | 2 | 50 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.47 | ciscoModemMgmtMIB | 3 | 112 | This MIB module provides modem call related data for tracking the progress and status of a call. |
| 1.3.6.1.4.1.9.9.48 | ciscoMemoryPoolMIB | 3 | 32 | MIB module for monitoring memory pools |
| 1.3.6.1.4.1.9.9.49 | ciscoFrameRelayMIB | 2 | 158 | Cisco Frame Relay MIB |
| 1.3.6.1.4.1.9.9.50 | ciscoAtmServiceRegistryMIB | 2 | 14 | A MIB module to allow an NMS to monitor and configure the information which an ATM switch makes available via the ILMI's Service … |
| 1.3.6.1.4.1.9.9.51 | ciscoAtmSwAddrMIB | 2 | 11 | ATM Switch address MIB |
| 1.3.6.1.4.1.9.9.52 | ciscoIpEncryptionMIB | 3 | 51 | Used to manage the encryption feature. |
| 1.3.6.1.4.1.9.9.53 | ciscoVmpsMIB | 3 | 55 | The MIB module for the management of the VLAN Membership Policy Server. |
| 1.3.6.1.4.1.9.9.54 | ciscoTn3270ServerMIB | 3 | 105 | The MIB module for TN3270 Server. MIB description The PU and LU MIB are defined in RFC 1666. This MIB provides additional informa… |
| 1.3.6.1.4.1.9.9.55 | ciscoAsppMIB | 2 | 29 | The ASPP MIB provides the configuration and operational information on asynchronous polled protocols such as the asynchronous sec… |
| 1.3.6.1.4.1.9.9.56 | ciscoVlanBridgingMIB | 2 | 13 | A set of managed objects for optimizing access to bridging related data from RFC 1493. This MIB is modeled after portions of RFC… |
| 1.3.6.1.4.1.9.9.57 | ciscoCompressionServiceAdapterMIB | 2 | 19 | Used to manage the compression service adapter. |
| 1.3.6.1.4.1.9.9.59 | ciscoStackMakerMIB | 2 | 15 | The MIB module for Cisco Systems' StackMaker. |
| 1.3.6.1.4.1.9.9.60 | ciscoAtmDualPhyMIB | 3 | 26 | Initial version of this MIB module. Phy definition Throughout this document phy is used as an abbreviation for Physical Interface.… |
| 1.3.6.1.4.1.9.9.61 | ciscoAccessEnvMonMIB | 3 | 13 | The MIB module to describe the additional status of the Environmental Monitor on those Cisco Access devices which support one. |
| 1.3.6.1.4.1.9.9.62 | ciscoVoiceAnalogIfMIB | 2 | 90 | Analog Voice Interface MIB module. This MIB manages the E&M, FXO, FXS Interfaces in the router. |
| 1.3.6.1.4.1.9.9.63 | ciscoVoiceDialControlMIB | 3 | 377 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing management of voice telephony peers on both a circuit-s… |
| 1.3.6.1.4.1.9.9.64 | ciscoVoiceInterfaceMIB | 2 | 24 | Common Voice Interface MIB module. The MIB module manages the common voice related parameters for both voice analog and ISDN inte… |
| 1.3.6.1.4.1.9.9.65 | ciscoPnniMIB | 2 | 49 | The MIB module for managing Cisco specific extensions to the ATM Forum PNNI MIB. |
| 1.3.6.1.4.1.9.9.66 | ciscoAal5MIB | 2 | 25 | Cisco Enterprise AAL5 MIB file that provide AAL5 specific information that are either excluded by RFC 1695 or specific to Cisco p… |
| 1.3.6.1.4.1.9.9.67 | ciscoAtmAccessListMIB | 2 | 39 | A cisco ATM access list mib module. |
| 1.3.6.1.4.1.9.9.68 | ciscoVlanMembershipMIB | 3 | 90 | The MIB module for the management of the VLAN Membership within the frame work of Cisco VLAN Architecture, v 2.0 by Keith McClog… |
| 1.3.6.1.4.1.9.9.69 | ciscoLecDataVccMIB | 3 | 13 | This MIB module is a Cisco extension to the ATM Forum's LANE Client MIB. This extension identifies those VCCs which are being us… |
| 1.3.6.1.4.1.9.9.72 | ciscoCipCmpcMIB | 3 | 46 | This is the Management Information Base (MIB) module for objects used to manage the Cisco Multi-Path Channel (MPC) support on Cis… |
| 1.3.6.1.4.1.9.9.73 | ciscoCipTgMIB | 2 | 98 | This is the Management Information Base (MIB) module for objects used to manage Transmission Groups (TGs) in Cisco Mainframe Chan… |
| 1.3.6.1.4.1.9.9.74 | ciscoDlswExtMIB | 3 | 134 | The MIB module for management of Cisco specific Data Link Switching protocol enhancements. DLSw is described in RFC 1795 and RFC… |
| 1.3.6.1.4.1.9.9.76 | ciscoDlcSwitchMIB | 2 | 55 | This is the MIB module for objects used to manage FRAS sessions to the endstation. These objects are specific to downstream or end… |
| 1.3.6.1.4.1.9.9.77 | ciscoLecExtMIB | 3 | 12 | This MIB module is a Cisco extension to the ATM Forum's LANE Client MIB. |
| 1.3.6.1.4.1.9.9.78 | ciscoAtmSigDiagMIB | 2 | 58 | The MIB module to facilitate the diagnosis of failures of ATM Signalling requests. Through this MIB, an ATM device retains infor… |
| 1.3.6.1.4.1.9.9.80 | ciscoFtpClientMIB | 2 | 29 | The MIB module for invoking Internet File Transfer Protocol (FTP) operations for network management purposes. |
| 1.3.6.1.4.1.9.9.81 | ciscoBulkFileMIB | 3 | 63 | The MIB module for creating and deleting bulk files of SNMP data for file transfer. |
| 1.3.6.1.4.1.9.9.82 | ciscoStpExtensionsMIB | 3 | 300 | The MIB module for managing Cisco extensions to the 802.1D Spanning Tree Protocol (STP). |
| 1.3.6.1.4.1.9.9.83 | ciscoWredMIB | 2 | 26 | Cisco WRED MIB - Overview Cisco Weighted Random Early Detection/Drop is a method which avoids traffic congestion on an output int… |
| 1.3.6.1.4.1.9.9.84 | ciscoIpStatMIB | 2 | 34 | Cisco IP Statistics MIB - Overview This MIB incorporates objects to provide support for the Cisco IP statistics as implemented in… |
| 1.3.6.1.4.1.9.9.85 | ciscoCasIfMIB | 2 | 119 | Channel Associated Signal Interface MIB module. This MIB manages the generic CAS (Channel Associated Signal)or DS0 clear channel … |
| 1.3.6.1.4.1.9.9.86 | ciscoDspMgmtMIB | 4 | 141 | ciscoDspMgmtMIB MODULE-IDENTITY LAST-UPDATED "200008140000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Cu… |
| 1.3.6.1.4.1.9.9.87 | ciscoC2900MIB | 3 | 133 | The MIB module for Catalyst 2900 enterprise specific information |
| 1.3.6.1.4.1.9.9.88 | ciscoAtmExtMIB | 3 | 50 | ciscoAtmExtMIB MODULE-IDENTITY LAST-UPDATED "9706200000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Custo… |
| 1.3.6.1.4.1.9.9.89 | csCugMIB | 2 | 24 | This MIB module is for closed user group support (virtual private networks). |
| 1.3.6.1.4.1.9.9.91 | entitySensorMIB, ciscoEntitySensorMIB | 3 | 42 | The CISCO-ENTITY-SENSOR-MIB is used to monitor the values of sensors in the Entity-MIB (RFC 2037) entPhysicalTable. |
| 1.3.6.1.4.1.9.9.92 | ciscoEntityAssetMIB | 3 | 29 | Monitor the asset information of items in the ENTITY-MIB (RFC 2037) entPhysical table. |
| 1.3.6.1.4.1.9.9.94 | ciscoAtmPvcMIB | 2 | 19 | PVC's (Permanent Virtual Channel) can carry bridged PDUs (BPDUs) using the encapsulation method detailed in RFC1483. This is an alt… |
| 1.3.6.1.4.1.9.9.95 | ciscoAlpsMIB | 3 | 222 | The MIB module for Airline Protocol Support. ************************************************************** * … |
| 1.3.6.1.4.1.9.9.96 | ciscoConfigCopyMIB | 3 | 40 | This MIB facilitates writing of configuration files of an SNMP Agent running Cisco's IOS in the following ways: to and from the n… |
| 1.3.6.1.4.1.9.9.98 | ciscoPagpMIB | 2 | 52 | The MIB module for configuration of Fast Etherchannel and the operation of the Port Aggregation Protocol (PAgP). These features a… |
| 1.3.6.1.4.1.9.9.99 | ciscoLocalDirectorMIB | 3 | 88 | The MIB module to view information about LocalDirector. The Cisco LocalDirector is a device designed for the purpose of load balan… |
| 1.3.6.1.4.1.9.9.101 | ciscoSwitchCgmpMIB | 2 | 18 | Switch-side Cisco Group Management Protocol MIB for Layer 2 Switch devices. |
| 1.3.6.1.4.1.9.9.102 | ciscoMediaMailDialControlMIB | 2 | 63 | This MIB module enhances the IETF Dial Control MIB (RFC2128) for providing management of dial peers on both a circuit-switched te… |
| 1.3.6.1.4.1.9.9.103 | ciscoRmonConfigMIB | 3 | 123 | This module defines configuration extensions for some of the IETF RMON MIBs. The following terms are used throughout this MIB: A S… |
| 1.3.6.1.4.1.9.9.105 | ciscoC8500RedundancyMIB | 3 | 49 | This MIB allows management of redundancy of CPU and switch cards for the Catalyst 8540 switch, and other products with similar im… |
| 1.3.6.1.4.1.9.9.106 | ciscoHsrpMIB | 3 | 38 | ciscoHsrpMIB MODULE-IDENTITY LAST-UPDATED "9808030000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Custome… |
| 1.3.6.1.4.1.9.9.107 | ciscoHsrpExtMIB | 2 | 36 | ciscoHsrpExtMIB MODULE-IDENTITY LAST-UPDATED "9808030000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Cust… |
| 1.3.6.1.4.1.9.9.109 | ciscoProcessMIB | 3 | 187 | The MIB module to describe active system processes. |
| 1.3.6.1.4.1.9.9.110 | ciscoAtmSwitchFrRmMIB | 3 | 30 | This MIB module describes a set of objects used for switch Resource Management (RM) for Frame Relay/Frame based User-to-Network (… |
| 1.3.6.1.4.1.9.9.112 | ciscoAtmSwitchFrIwfMIB | 2 | 109 | A MIB module for managing Frame Relay to ATM interworking connections, and Frame Relay to Frame Relay switched connections via an… |
| 1.3.6.1.4.1.9.9.113 | ciscoCarMIB | 2 | 36 | Cisco CAR MIB - Overview Cisco Weighted Rate-limit, known as Commited Access Rate (CAR), is a traffic control method which uses a… |
| 1.3.6.1.4.1.9.9.114 | ciscoCableSpectrumMIB | 3 | 162 | This is the MIB Module for Cable Spectrum Management for DOCSIS-compliant Cable Modem Termination Systems (CMTS). Spectrum manage… |
| 1.3.6.1.4.1.9.9.115 | ciscoCasaFaMIB | 3 | 78 | This MIB module in conjunction with the CISCO-CASA-MIB, defines the SNMP management information base for managing the Cisco Appli… |
| 1.3.6.1.4.1.9.9.116 | ciscoDocsExtMIB | 3 | 235 | This is the MIB module for the Cisco specific extension objects of Data Over Cable Service, Radio Frequency interface. There is … |
| 1.3.6.1.4.1.9.9.117 | ciscoEntityFRUControlMIB | 3 | 147 | The CISCO-ENTITY-FRU-CONTROL-MIB is used to monitor and configure operational status of Field Replaceable Units (FRUs) and other … |
| 1.3.6.1.4.1.9.9.118 | ciscoUdldpMIB | 3 | 51 | Cisco Uni Direction Link Detection Protocol MIB |
| 1.3.6.1.4.1.9.9.120 | ciscoNetworkRegistrarMIB | 3 | 125 | MIB for Cisco Network Registrar (CNR). |
| 1.3.6.1.4.1.9.9.121 | ciscoAtmNetworkClockMIB | 3 | 53 | The MIB module for management of network clock distribution and the Network Clock Distribution Protocol (NCDP) in Cisco de… |
| 1.3.6.1.4.1.9.9.122 | ciscoCasaMIB | 3 | 78 | This MIB contains the basic objects for managing a Cisco Appliance Services Architecture (CASA) Entity. A CASA Entity can be a Ma… |
| 1.3.6.1.4.1.9.9.124 | ciscoCallResourcePoolMIB | 3 | 114 | The MIB module for call resource pool management. This MIB supports the resource pool manager feature of CISCO IOS. This feature … |
| 1.3.6.1.4.1.9.9.125 | ciscoWANRsrcPartMIB | 2 | 55 | The MIB module to manage resource partition objects. A resource partition is configured on a virtual interface (ifType value atmV… |
| 1.3.6.1.4.1.9.9.126 | ciscoSonetMIB | 3 | 136 | The MIB module to describe SONET/SDH interfaces objects. This is an extension to the standard SONET MIB(RFC 2558). |
| 1.3.6.1.4.1.9.9.128 | ciscoVlanIfTableRelationshipMIB | 1 | 12 | ciscoVlanIftableRelationshipMIB |
| 1.3.6.1.4.1.9.9.129 | ciscoAtmVirtualIfMIB | 2 | 139 | The MIB module to manage ATM Virtual interface objects. ATM virtual interfaces are configured on a physical line. |
| 1.3.6.1.4.1.9.9.130 | ciscoAdslDmtLineMIB | 3 | 72 | This MIB module serves as an enterprise-specific extension of the ADSL-LINE-MIB. The structure of this MIB module shadows the st… |
| 1.3.6.1.4.1.9.9.131 | ciscoSystemMIB | 3 | 57 | The systemGroup (see RFC 1907) provides a standard set of basic system information. This MIB module contains Cisco-defined exten… |
| 1.3.6.1.4.1.9.9.132 | ciscoDs3MIB | 2 | 140 | The MIB module to describe DS3 line objects. This is an extension to the standard DS3 MIB(RFC 2496). |
| 1.3.6.1.4.1.9.9.133 | ciscoAtmCellLayerMIB | 1 | 138 | The MIB module to describe ATM cell layer objects and statistics of a physical line. |
| 1.3.6.1.4.1.9.9.134 | ciscoClusterMIB | 3 | 49 | The MIB module for the management of a group of devices called a 'cluster'. A cluster comprises: 1. A command switch, which is a… |
| 1.3.6.1.4.1.9.9.135 | ciscoWirelessP2pBpiMIB | 3 | 66 | This is the MIB Module for the Baseline Privacy Interface (BPI) at Point to Point Wireless Radio Card. This is a specialization o… |
| 1.3.6.1.4.1.9.9.136 | ciscoWirelessIfMIB | 3 | 307 | This is the MIB Module for the Cisco Wireless Radio Point to Point interface specification. I) Relationship of the Cisco Wireless… |
| 1.3.6.1.4.1.9.9.137 | ciscoWirelessTextualConventions | 0 | 0 | This module defines textual conventions used in Cisco Wireless MIBs. |
| 1.3.6.1.4.1.9.9.138 | ciscoEntityAlarmMIB | 3 | 66 | This MIB module defines the managed objects that support the monitoring of alarms generated by physical entities contained by the… |
| 1.3.6.1.4.1.9.9.139 | ciscoEntityProvMIB | 3 | 13 | This MIB module defines the objects that support provisioning of 'container' class physical entities. Provisioning sets up a 'co… |
| 1.3.6.1.4.1.9.9.140 | ciscoCopsClientMIB | 3 | 43 | This MIB module is for configuration & statistic query of Common Open Policy Service(COPS) client feature on the Cisco device. C… |
| 1.3.6.1.4.1.9.9.141 | ciscoVSIControllerMIB | 2 | 21 | This MIB module is used for configuring ATM Capable Switch to be aware of VSI Controller information. Terminolgies used: VSI … |
| 1.3.6.1.4.1.9.9.144 | ciscoTransactionConnectionMIB | 2 | 66 | The MIB module for retrieving Cisco Transaction Connection configuration and status. Cisco Transaction Connection routes transac… |
| 1.3.6.1.4.1.9.9.145 | ciscoWanModuleMIB | 3 | 32 | The MIB to configure Connection Specific parameters and statistics related information in a Service Module. The Service Module(SM… |
| 1.3.6.1.4.1.9.9.146 | ciscoCallApplicationMIB | 2 | 548 | This MIB allows management of call applications on a network device. A 'call application' is a software module that processes cal… |
| 1.3.6.1.4.1.9.9.147 | ciscoFirewallMIB | 3 | 75 | MIB module for monitoring Cisco Firewalls. |
| ... | ||||