The administrative fast aging time for the established flow
entries, that have less number of packets than the value set in
the cseFlowFastAgePktThreshold, switched within this time.
Setting to value of 0 turns off fast aging.
The default value for this object is implementation specific.
If the cseFlowFastAgingTime is not configured to the
appropriate value, it will be adjusted to the closest value.
The corresponding operational object, taken effect on the
device, is cseFlowOperFastAgingTime.
Parsed from file CISCO-SWITCH-ENGINE-MIB.mib
Module: CISCO-SWITCH-ENGINE-MIB
The administrative fast aging time for the established flow
entries, that have less number of packets than the value set in
the cseFlowFastAgePktThreshold, switched within this time.
Setting to value of 0 turns off fast aging.
The default value for this object is implementation specific.
If the cseFlowFastAgingTime is not configured to the
appropriate value, it will be adjusted to the closest value.
The corresponding operational object, taken effect on the
device, is cseFlowOperFastAgingTime.
The administrative fast aging time for the established flow
entries, that have less number of packets than the value set in
the cseFlowFastAgePktThreshold, switched within this time.
Setting to value of 0 turns off fast aging.
The default value for this object is implementation specific.
If the cseFlowFastAgingTime is not configured to the
appropriate value, it will be adjusted to the closest value.
The corresponding operational object, taken effect on the
device, is cseFlowOperFastAgingTime.
Parsed from file CISCO-SWITCH-ENGINE-MIB.my.txt
Company: None
Module: CISCO-SWITCH-ENGINE-MIB
The administrative fast aging time for the established flow
entries, that have less number of packets than the value set in
the cseFlowFastAgePktThreshold, switched within this time.
Setting to value of 0 turns off fast aging.
The default value for this object is implementation specific.
If the cseFlowFastAgingTime is not configured to the
appropriate value, it will be adjusted to the closest value.
The corresponding operational object, taken effect on the
device, is cseFlowOperFastAgingTime.
cseFlowFastAgingTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative fast aging time for the established flow entries, that have less number of packets than the value set in the cseFlowFastAgePktThreshold, switched within this time. Setting to value of 0 turns off fast aging. The default value for this object is implementation specific. If the cseFlowFastAgingTime is not configured to the appropriate value, it will be adjusted to the closest value. The corresponding operational object, taken effect on the device, is cseFlowOperFastAgingTime." ::= { cseFlow 2 }
cseFlowFastAgingTime OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "The administrative fast aging time for the established flow entries, that have less number of packets than the value set in the cseFlowFastAgePktThreshold, switched within this time. Setting to value of 0 turns off fast aging. The default value for this object is implementation specific. If the cseFlowFastAgingTime is not configured to the appropriate value, it will be adjusted to the closest value. The corresponding operational object, taken effect on the device, is cseFlowOperFastAgingTime." ::= { cseFlow 2 }
Vendor: Cisco
Module: CISCO-SWITCH-ENGINE-MIB
[Automatically extracted from oidview.com]
cseFlowFastAgingTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative fast aging time for the established flow entries, that have less number of packets than the value set in the cseFlowFastAgePktThreshold, switched within this time. Setting to value of 0 turns off fast aging. The default value for this object is implementation specific. If the cseFlowFastAgingTime is not configured to the appropriate value, it will be adjusted to the closest value. The corresponding operational object, taken effect on the device, is cseFlowOperFastAgingTime." ::= { cseFlow 2 }
cseFlowFastAgingTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative fast aging time for the established flow entries, that have less number of packets than the value set in the cseFlowFastAgePktThreshold, switched within this time. Setting to value of 0 turns off fast aging. The default value for this object is implementation specific. If the cseFlowFastAgingTime is not configured to the appropriate value, it will be adjusted to the closest value. The corresponding operational object, taken effect on the device, is cseFlowOperFastAgingTime." ::= { cseFlow 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.97.1.2.2.0 | cseFlowFastAgingTime | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.97.1.2.1 | cseFlowEstablishedAgingTime | 1 | 1 | The adminstrative aging time for IP established flows. The default value for this object is implementation specific. If the cseFl… |
| 1.3.6.1.4.1.9.9.97.1.2.3 | cseFlowFastAgePktThreshold | 1 | 1 | The administrative packet threshold setting for the cseFlowFastAgingTime. The default for Fast Aging Packet Threshold is 0, i.e. … |
| 1.3.6.1.4.1.9.9.97.1.2.4 | cseRouterTable | 1 | 6 | A table containing information about all routers that are discovered by the switch, including internal and external routers. |
| 1.3.6.1.4.1.9.9.97.1.2.5 | cseStaticExtRouterTable | 1 | 5 | A table of external routers which are enabled for Layer 3 IP switching by the switching engine. This table may contain routers th… |
| 1.3.6.1.4.1.9.9.97.1.2.6 | cseRouterVlanTable | 1 | 4 | The table listing the MAC address used by routers on particular VLANs. |
| 1.3.6.1.4.1.9.9.97.1.2.7 | cseFlowMaxQueries | 1 | 1 | Maximum number of query entries allowed to be outstanding at any time, in the cseFlowQueryTable. The typical value for this objec… |
| 1.3.6.1.4.1.9.9.97.1.2.8 | cseFlowQueryTable | 1 | 19 | A control table used to query the switching engine by specifying retrieval criteria for L3 flows. The resulting data for each ins… |
| 1.3.6.1.4.1.9.9.97.1.2.9 | cseFlowDataTable | 1 | 15 | A table containing L3 flow information corresponding to all the completed queries setup in the cseFlowQueryTable, that were initi… |
| 1.3.6.1.4.1.9.9.97.1.2.10 | cseFlowSwitchControlTable | 1 | 3 | A table used to control the L3 flow switching operation, per protocol type. |
| 1.3.6.1.4.1.9.9.97.1.2.11 | cseFlowMcastMaxQueries | 1 | 1 | Maximum number of query entries allowed to be outstanding at any time, in the cseFlowMcastQueryTable. The typical value for this… |
| 1.3.6.1.4.1.9.9.97.1.2.12 | cseFlowMcastQueryTable | 1 | 17 | A control table used to query the switching engine by specifying retrieval criteria for IP multicast L3 flows. Each row instance … |
| 1.3.6.1.4.1.9.9.97.1.2.13 | cseFlowMcastResultTable | 1 | 22 | A table containing current IP multicast flow information corresponding to all the completed queries set up in the cseFlowMcastQue… |
| 1.3.6.1.4.1.9.9.97.1.2.14 | cseFlowMcastSwitchStatus | 1 | 1 | The current status of the global IP multicast flow switching capability. When enabled, the switch engine will be able to install… |
| 1.3.6.1.4.1.9.9.97.1.2.15 | cseFlowIPXEstablishedAgingTime | 1 | 1 | The administrative aging time for established IPX flows. The default value for this object is implementation specific. The corres… |
| 1.3.6.1.4.1.9.9.97.1.2.16 | cseStaticIpxExtRouterTable | 1 | 4 | A table of external routers which are enabled for Layer 3 IPX switching by the switching engine. This table may contain routers th… |
| 1.3.6.1.4.1.9.9.97.1.2.17 | cseFlowOperEstablishedAgingTime | 1 | 1 | The operational aging time for IP established flows. |
| 1.3.6.1.4.1.9.9.97.1.2.18 | cseFlowOperFastAgingTime | 1 | 1 | The operational fast aging time for the established flow entries, that have less number of packets than the value set in the cseF… |
| 1.3.6.1.4.1.9.9.97.1.2.19 | cseFlowOperFastAgePktThreshold | 1 | 1 | The operational packet threshold for the cseFlowOperFastAgingTime. |
| 1.3.6.1.4.1.9.9.97.1.2.20 | cseFlowOperIPXAgingTime | 1 | 1 | The operational aging time for established IPX flows. |
| 1.3.6.1.4.1.9.9.97.1.2.21 | cseBridgedFlowStatsCtrlTable | 1 | 3 | A table controls the reporting of intra-vlan statistics for bridged flow per vlan. When a vlan is created in a device supporting … |
| 1.3.6.1.4.1.9.9.97.1.2.22 | cseFlowIPFlowMask | 1 | 1 | Indicates the flow mask for IP flows. If dstOnly(1) is used, it enables flows based on Layer 3 destination addresses only. If srcD… |
| 1.3.6.1.4.1.9.9.97.1.2.23 | cseFlowIPXFlowMask | 1 | 1 | Indicates the flow mask for IPX flows. If dstOnly(1) is used, it enables flows based on Layer 3 destination addresses only. If src… |
| 1.3.6.1.4.1.9.9.97.1.2.24 | cseFlowLongAgingTime | 1 | 1 | The administrative long aging time for the established flow entries. Setting to value of 0 turns off long aging. |
| 1.3.6.1.4.1.9.9.97.1.2.25 | cseFlowExcludeTable | 1 | 4 | A table controls the flow creation based on protocol and port number. If a packet matches the protocol and port number specified … |
| 1.3.6.1.4.1.9.9.97.1.2.26 | cseFlowStatsTable | 1 | 3 | A table containing flow statistics information on each switching engine. |