The status object used to manage rows in this table.
When set to active(1), the query is initiated.
Once initiated, the value may
not be modified until the value of cseFlowQueryResultingRows is
greater than or equal to 0. However, this object can be set to
active(1) only after all the appropriate objects for this query
as defined by the value set in the cseFlowQueryMask object,
have also been set.
Once a row becomes active, values within the row cannot
be modified, except by deleting and re-creating it.
Parsed from file CISCO-SWITCH-ENGINE-MIB.mib
Module: CISCO-SWITCH-ENGINE-MIB
The status object used to manage rows in this table.
When set to active(1), the query is initiated.
Once initiated, the value may
not be modified until the value of cseFlowQueryResultingRows is
greater than or equal to 0. However, this object can be set to
active(1) only after all the appropriate objects for this query
as defined by the value set in the cseFlowQueryMask object,
have also been set.
Once a row becomes active, values within the row cannot
be modified, except by deleting and re-creating it.
The status object used to manage rows in this table.
When set to active(1), the query is initiated.
Once initiated, the value may
not be modified until the value of cseFlowQueryResultingRows is
greater than or equal to 0. However, this object can be set to
active(1) only after all the appropriate objects for this query
as defined by the value set in the cseFlowQueryMask object,
have also been set.
Once a row becomes active, values within the row cannot
be modified, except by deleting and re-creating it.
Parsed from file CISCO-SWITCH-ENGINE-MIB.my.txt
Company: None
Module: CISCO-SWITCH-ENGINE-MIB
The status object used to manage rows in this table.
When set to active(1), the query is initiated.
Once initiated, the value may
not be modified until the value of cseFlowQueryResultingRows is
greater than or equal to 0. However, this object can be set to
active(1) only after all the appropriate objects for this query
as defined by the value set in the cseFlowQueryMask object,
have also been set.
Once a row becomes active, values within the row cannot
be modified, except by deleting and re-creating it.
cseFlowQueryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status object used to manage rows in this table. When set to active(1), the query is initiated. Once initiated, the value may not be modified until the value of cseFlowQueryResultingRows is greater than or equal to 0. However, this object can be set to active(1) only after all the appropriate objects for this query as defined by the value set in the cseFlowQueryMask object, have also been set. Once a row becomes active, values within the row cannot be modified, except by deleting and re-creating it." ::= { cseFlowQueryEntry 15 }
cseFlowQueryStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status object used to manage rows in this table. When set to active(1), the query is initiated. Once initiated, the value may not be modified until the value of cseFlowQueryResultingRows is greater than or equal to 0. However, this object can be set to active(1) only after all the appropriate objects for this query as defined by the value set in the cseFlowQueryMask object, have also been set. Once a row becomes active, values within the row cannot be modified, except by deleting and re-creating it." ::= { cseFlowQueryEntry 15 }
Vendor: Cisco
Module: CISCO-SWITCH-ENGINE-MIB
[Automatically extracted from oidview.com]
cseFlowQueryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status object used to manage rows in this table. When set to active(1), the query is initiated. Once initiated, the value may not be modified until the value of cseFlowQueryResultingRows is greater than or equal to 0. However, this object can be set to active(1) only after all the appropriate objects for this query as defined by the value set in the cseFlowQueryMask object, have also been set. Once a row becomes active, values within the row cannot be modified, except by deleting and re-creating it." ::= { cseFlowQueryEntry 15 }
cseFlowQueryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status object used to manage rows in this table. When set to active(1), the query is initiated. Once initiated, the value may not be modified until the value of cseFlowQueryResultingRows is greater than or equal to 0. However, this object can be set to active(1) only after all the appropriate objects for this query as defined by the value set in the cseFlowQueryMask object, have also been set. Once a row becomes active, values within the row cannot be modified, except by deleting and re-creating it." ::= { cseFlowQueryEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.97.1.2.8.1.1 | cseFlowQueryIndex | 0 | 0 | An arbitrary integer which uniquely identifies the control query among all those specified for the switching engine indicated by … |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.2 | cseFlowQueryMask | 0 | 0 | Setting each value causes the appropriate action: 'dstOnly' - causes the creation of rows in the cseFlowDataTable corresponding t… |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.3 | cseFlowQueryTransport | 0 | 0 | The IP transport protocol type specified for this query. Ignored for IPX flow queries. The value of this object cannot be modifie… |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.4 | cseFlowQuerySource | 0 | 0 | The source network address and port (if applicable). The value of this object cannot be modified when the corresponding instance … |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.5 | cseFlowQuerySourceMask | 0 | 0 | The source address mask to be applied to the corresponding instance of cseFlowQuerySource. The value of this object cannot be mod… |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.6 | cseFlowQueryDestination | 0 | 0 | The destination network address and port (if applicable). The value of this object cannot be modified when the corresponding inst… |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.7 | cseFlowQueryDestinationMask | 0 | 0 | The destination address mask to be applied to the corresponding instance of cseFlowQueryDestination. The value of this object can… |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.8 | cseFlowQueryRouterIndex | 0 | 0 | Index of the router for which the flows are available. An 'all-zero' IP address indicates that the query is for any router. The v… |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.9 | cseFlowQueryOwner | 0 | 0 | The manager entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.10 | cseFlowQueryResultingRows | 0 | 0 | The result status of the query. Possible values are: -1 - Either the query has not been initiated or the agent is busy… |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.11 | cseFlowQueryResultTotalPkts | 0 | 0 | The aggregate number of total packets switched by the system on all the flows matching this query. This is a snapshot value and i… |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.12 | cseFlowQueryResultTotalOctets | 0 | 0 | The aggregate number of total octets switched by the system on all the flows matching this query. This is a snapshot value and is… |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.13 | cseFlowQueryResultAvgDuration | 0 | 0 | The average duration of the flows matching this query. This is a snapshot value and is valid only when the corresponding instance… |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.14 | cseFlowQueryResultAvgIdle | 0 | 0 | The elapsed time since the flows were last used, averaged over all flows matching this query. This is a snapshot value and is val… |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.16 | cseFlowQueryCreateTime | 0 | 0 | Time when this query was created. |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.17 | cseFlowQueryTotalFlows | 0 | 0 | The total number of L3 flows matching the query criterion. |
| 1.3.6.1.4.1.9.9.97.1.2.8.1.18 | cseFlowQuerySkipNFlows | 0 | 0 | The number of searched flows to be skipped before storing any L3 flows in cseFlowDataTable. This object can be used along with cs… |