The configurable time duration for monitoring the excessive rate
at which packets are dropped by the L2 Relay on SGSN due to traffic
congestion problem.
Parsed from file CISCO-GPRS-L2RLY-MIB.mib
Module: CISCO-GPRS-L2RLY-MIB
The configurable time duration for monitoring the excessive rate
at which packets are dropped by the L2 Relay on SGSN due to traffic
congestion problem.
The configurable time duration for monitoring the excessive rate
at which packets are dropped by the L2 Relay on SGSN due to traffic
congestion problem.
Parsed from file CISCO-GPRS-L2RLY-MIB.my.txt
Company: None
Module: CISCO-GPRS-L2RLY-MIB
The configurable time duration for monitoring the excessive rate
at which packets are dropped by the L2 Relay on SGSN due to traffic
congestion problem.
cgprsL2rlyDroppedPktsMonTime OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The configurable time duration for monitoring the excessive rate at which packets are dropped by the L2 Relay on SGSN due to traffic congestion problem. " DEFVAL { 300 } ::= { ciscoGprsL2rlyConfig 5 }
cgprsL2rlyDroppedPktsMonTime OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The configurable time duration for monitoring the excessive rate at which packets are dropped by the L2 Relay on SGSN due to traffic congestion problem." DEFVAL { 300 } ::= { ciscoGprsL2rlyConfig 5 }
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
cgprsL2rlyDroppedPktsMonTime OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The configurable time duration for monitoring the excessive rate at which packets are dropped by the L2 Relay on SGSN due to traffic congestion problem. " DEFVAL { 300 } ::= { ciscoGprsL2rlyConfig 5 }
cgprsL2rlyDroppedPktsMonTime OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The configurable time duration for monitoring the excessive rate at which packets are dropped by the L2 Relay on SGSN due to traffic congestion problem. " DEFVAL { 300 } ::= { ciscoGprsL2rlyConfig 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.9993.1.1.5.0 | cgprsL2rlyDroppedPktsMonTime | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.9993.1.1.1 | cgprsL2rlyUid | 1 | 1 | L2 Relay unit identification. |
| 1.3.6.1.4.1.9.9.9993.1.1.2 | cgprsL2rlyUnitType | 1 | 1 | The type can be either a datacom unit, or a telecom unit. |
| 1.3.6.1.4.1.9.9.9993.1.1.3 | cgprsL2rlyEchoTimer | 1 | 1 | The frequency of transmission of self_id packet. This packet is transmitted periodically, for keep-alive and auto discovery purpo… |
| 1.3.6.1.4.1.9.9.9993.1.1.4 | cgprsL2rlyFlowControlFlag | 1 | 1 | L2 Relay flow control function flag. 'on' means that the flow control has been enabled, and 'off' means the converse. |
| 1.3.6.1.4.1.9.9.9993.1.1.6 | cgprsL2rlyNoRespToKeepAliveMsgNotificationEnable | 1 | 1 | The object indicates whether the system produces the cgprsL2rlyNoRespToKeepAliveMsgNotification. A false value will preven… |
| 1.3.6.1.4.1.9.9.9993.1.1.7 | cgprsL2rlyUnitJoinNotificationEnable | 1 | 1 | The object indicates whether the system produces the cgprsL2rlyUnitJoinNotification. A false value will prevent the cgprsL2… |
| 1.3.6.1.4.1.9.9.9993.1.1.8 | cgprsL2rlyInterfaceTable | 1 | 3 | The table that lists the interfaces which l2rly is using. Currently the table has just two and always two entries. There is only … |