Each entry in this table specifies which protocols are
used by a particular port in the ES/1.
Parsed from file ctATX-mib.mib.txt
Company: None
Module: CTATX-MIB
Each entry in this table specifies which protocols are
used by a particular port in the ES/1.
Parsed from file CTATX-MIB.mib
Module: CTATX-MIB
sprotoEntry OBJECT-TYPE SYNTAX SprotoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table specifies which protocols are used by a particular port in the ES/1." INDEX { sprotoIfIndex } ::= { sprotoTable 1 }
Vendor: Sigma Network Systems, Inc.
Module: CTATX-MIB
[Automatically extracted from oidview.com]
sprotoEntry OBJECT-TYPE SYNTAX SprotoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table specifies which protocols are used by a particular port in the ES/1." INDEX { sprotoIfIndex } ::= { sprotoTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.97.3.17.1.1.1 | sprotoIfIndex | 0 | 0 | Identifies the interface (port) to which this entry's information belongs. The value of this variable corresponds to ifIndex, as … |
| 1.3.6.1.4.1.97.3.17.1.1.2 | sprotoBridge | 0 | 0 | Defines the bridging method to be applied to frames received at, or destined for, this port. Ethernet and FDDI ports may be confi… |
| 1.3.6.1.4.1.97.3.17.1.1.3 | sprotoSuppressBpdus | 0 | 0 | Allows transmission of spanning tree protocol packets to be suppressed. If normal(1), 802.1d spanning tree packets and source-ro… |
| 1.3.6.1.4.1.97.3.17.1.1.4 | sprotoIpRoute | 0 | 0 | Specifies whether or not this port is to be used for IP routing. |
| 1.3.6.1.4.1.97.3.17.1.1.5 | sprotoIpxRoute | 0 | 0 | Specifies whether or not this port is to be used for Novell NetWare IPX routing. |
| 1.3.6.1.4.1.97.3.17.1.1.6 | sprotoAppleRoute | 0 | 0 | Specifies whether or not this port is to be used for AppleTalk (tm) routing. |
| 1.3.6.1.4.1.97.3.17.1.1.7 | sprotoArpTranslate | 0 | 0 | These options are intended to compensate for any like- ly implementation of internet ARP on 802.5 token ring. If set to bitswap1(… |
| 1.3.6.1.4.1.97.3.17.1.1.8 | sprotoArpSourceRoute | 0 | 0 | Specifies whether, when bridging TCP/IP ARP packets which are source-routing explorer frames, the routing information is to be st… |
| 1.3.6.1.4.1.97.3.17.1.1.9 | sprotoIpxTranslate | 0 | 0 | Specifies whether, when bridging Novell IPX frames, they are to be translated to Ethernet-like frame for- mat. This option applies… |
| 1.3.6.1.4.1.97.3.17.1.1.10 | sprotoAppleTranslate | 0 | 0 | Specifies whether, when bridging AppleTalk ELAP, TLAP, and AARP frames, those frames are to be translated between token ring and … |
| 1.3.6.1.4.1.97.3.17.1.1.11 | sprotoIbmLlcTranslate | 0 | 0 | Specifies whether, when bridging IBM LLC frames, an 8209-style translation between token ring and Ethernet format is to be perfor… |
| 1.3.6.1.4.1.97.3.17.1.1.12 | sprotoRip | 0 | 0 | Specifies whether the internet Routing Information Protocol (RFC-1058) is to be used over this port. Only valid if sprotoIpRoute … |
| 1.3.6.1.4.1.97.3.17.1.1.13 | sprotoEgp | 0 | 0 | Specifies whether the internet External Gateway Proto- col (RFC-904) is to be used over this port. Only valid if sprotoIpRoute is… |
| 1.3.6.1.4.1.97.3.17.1.1.14 | sprotoOspf | 0 | 0 | Specifies whether the internet Open Shortest Path First protocol (RFC-1247) is to be used over this port. Only valid if sprotoIpR… |
| 1.3.6.1.4.1.97.3.17.1.1.15 | sprotoArpProxy | 0 | 0 | Specifies whether the port is to respond to internet ARP requests for which the unit is the next hop in a routed path. Only valid… |
| 1.3.6.1.4.1.97.3.17.1.1.16 | sprotoIbm8209Lsaps | 0 | 0 | Specifies up to eight LSAPs for which IBM 8209-style token-ring-to-Ethernet encapsulation is to be performed. Only valid if sprot… |
| 1.3.6.1.4.1.97.3.17.1.1.17 | sprotoBootpRelay | 0 | 0 | Specifies whether or not this port is to relay BOOTP packets, as described in RFC-951 and subsequent internet-drafts. Only valid … |
| 1.3.6.1.4.1.97.3.17.1.1.18 | sprotoNetbiosTranslate | 0 | 0 | Specifies whether, when bridging Netbios packets which are source-routing explorer frames, the routing information is to be strip… |
| 1.3.6.1.4.1.97.3.17.1.1.19 | sprotoIpMulticast | 0 | 0 | Specifies whether the internet Multicast Routing Protocol (RFC-1075) is to be used over this port. Only valid if sprotoIpRoute is… |
| 1.3.6.1.4.1.97.3.17.1.1.20 | sprotoTrunking | 0 | 0 | Specifies whether SMC's trunking protocol (an extension to the standard Spanning Tree) is to be used over this port. |
| 1.3.6.1.4.1.97.3.17.1.1.22 | sprotoIpxSrTranslate | 0 | 0 | Specifies whether, when bridging IPX packets which are source-routing explorer frames, the routing information is to be stripped … |
| 1.3.6.1.4.1.97.3.17.1.1.23 | sprotoAllTranslate | 0 | 0 | Specifies whether, when bridging any source-routed explorer frames, the routing information is to be stripped or propagated. If p… |
| 1.3.6.1.4.1.97.3.17.1.1.24 | sprotoSteHopCountAppliedRule | 0 | 0 | hopcountnotapplied(1), STE hop count rules are not applied to STE frames. Default for SR ports. Follows IBM's specifications. hop… |