Specifies whether, when bridging IPX packets
which are source-routing explorer frames, the routing
information is to be stripped or propagated. If pass-
Rif(1), the frame is bridged as is, with route-
discovery proceeding as expected. If stripRif(2), then
the routing information field is stripped before being
propagated. This option allows non-source-routing
(e.g., Ethernet) IPX hosts to communicate tran-
sparently. If passBoth(3), then both the original
source-routed frame and the transparent equivalent are
propagated. This choice provides maximum connectivity
at some expense in network traffic. None(4) is identical
to passRif.
This option applies only to token ring ports.
Parsed from file ctATX-mib.mib.txt
Company: None
Module: CTATX-MIB
Specifies whether, when bridging IPX packets
which are source-routing explorer frames, the routing
information is to be stripped or propagated. If pass-
Rif(1), the frame is bridged as is, with route-
discovery proceeding as expected. If stripRif(2), then
the routing information field is stripped before being
propagated. This option allows non-source-routing
(e.g., Ethernet) IPX hosts to communicate tran-
sparently. If passBoth(3), then both the original
source-routed frame and the transparent equivalent are
propagated. This choice provides maximum connectivity
at some expense in network traffic. None(4) is identical
to passRif.
This option applies only to token ring ports.
Parsed from file CTATX-MIB.mib
Module: CTATX-MIB
sprotoIpxSrTranslate OBJECT-TYPE SYNTAX INTEGER { passRif(1), stripRif(2), passBoth(3), none(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether, when bridging IPX packets which are source-routing explorer frames, the routing information is to be stripped or propagated. If pass- Rif(1), the frame is bridged as is, with route- discovery proceeding as expected. If stripRif(2), then the routing information field is stripped before being propagated. This option allows non-source-routing (e.g., Ethernet) IPX hosts to communicate tran- sparently. If passBoth(3), then both the original source-routed frame and the transparent equivalent are propagated. This choice provides maximum connectivity at some expense in network traffic. None(4) is identical to passRif. This option applies only to token ring ports." ::= { sprotoEntry 22 }
Vendor: Sigma Network Systems, Inc.
Module: CTATX-MIB
[Automatically extracted from oidview.com]
sprotoIpxSrTranslate OBJECT-TYPE SYNTAX INTEGER { passRif(1), stripRif(2), passBoth(3), none(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether, when bridging IPX packets which are source-routing explorer frames, the routing information is to be stripped or propagated. If pass- Rif(1), the frame is bridged as is, with route- discovery proceeding as expected. If stripRif(2), then the routing information field is stripped before being propagated. This option allows non-source-routing (e.g., Ethernet) IPX hosts to communicate tran- sparently. If passBoth(3), then both the original source-routed frame and the transparent equivalent are propagated. This choice provides maximum connectivity at some expense in network traffic. None(4) is identical to passRif. This option applies only to token ring ports." ::= { sprotoEntry 22 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.97.3.17.1.1.1 | sprotoIfIndex | 0 | 0 | Identifies the interface (port) to which this entry's information belongs. The value of this variable corresponds to ifIndex, as … |
| 1.3.6.1.4.1.97.3.17.1.1.2 | sprotoBridge | 0 | 0 | Defines the bridging method to be applied to frames received at, or destined for, this port. Ethernet and FDDI ports may be confi… |
| 1.3.6.1.4.1.97.3.17.1.1.3 | sprotoSuppressBpdus | 0 | 0 | Allows transmission of spanning tree protocol packets to be suppressed. If normal(1), 802.1d spanning tree packets and source-ro… |
| 1.3.6.1.4.1.97.3.17.1.1.4 | sprotoIpRoute | 0 | 0 | Specifies whether or not this port is to be used for IP routing. |
| 1.3.6.1.4.1.97.3.17.1.1.5 | sprotoIpxRoute | 0 | 0 | Specifies whether or not this port is to be used for Novell NetWare IPX routing. |
| 1.3.6.1.4.1.97.3.17.1.1.6 | sprotoAppleRoute | 0 | 0 | Specifies whether or not this port is to be used for AppleTalk (tm) routing. |
| 1.3.6.1.4.1.97.3.17.1.1.7 | sprotoArpTranslate | 0 | 0 | These options are intended to compensate for any like- ly implementation of internet ARP on 802.5 token ring. If set to bitswap1(… |
| 1.3.6.1.4.1.97.3.17.1.1.8 | sprotoArpSourceRoute | 0 | 0 | Specifies whether, when bridging TCP/IP ARP packets which are source-routing explorer frames, the routing information is to be st… |
| 1.3.6.1.4.1.97.3.17.1.1.9 | sprotoIpxTranslate | 0 | 0 | Specifies whether, when bridging Novell IPX frames, they are to be translated to Ethernet-like frame for- mat. This option applies… |
| 1.3.6.1.4.1.97.3.17.1.1.10 | sprotoAppleTranslate | 0 | 0 | Specifies whether, when bridging AppleTalk ELAP, TLAP, and AARP frames, those frames are to be translated between token ring and … |
| 1.3.6.1.4.1.97.3.17.1.1.11 | sprotoIbmLlcTranslate | 0 | 0 | Specifies whether, when bridging IBM LLC frames, an 8209-style translation between token ring and Ethernet format is to be perfor… |
| 1.3.6.1.4.1.97.3.17.1.1.12 | sprotoRip | 0 | 0 | Specifies whether the internet Routing Information Protocol (RFC-1058) is to be used over this port. Only valid if sprotoIpRoute … |
| 1.3.6.1.4.1.97.3.17.1.1.13 | sprotoEgp | 0 | 0 | Specifies whether the internet External Gateway Proto- col (RFC-904) is to be used over this port. Only valid if sprotoIpRoute is… |
| 1.3.6.1.4.1.97.3.17.1.1.14 | sprotoOspf | 0 | 0 | Specifies whether the internet Open Shortest Path First protocol (RFC-1247) is to be used over this port. Only valid if sprotoIpR… |
| 1.3.6.1.4.1.97.3.17.1.1.15 | sprotoArpProxy | 0 | 0 | Specifies whether the port is to respond to internet ARP requests for which the unit is the next hop in a routed path. Only valid… |
| 1.3.6.1.4.1.97.3.17.1.1.16 | sprotoIbm8209Lsaps | 0 | 0 | Specifies up to eight LSAPs for which IBM 8209-style token-ring-to-Ethernet encapsulation is to be performed. Only valid if sprot… |
| 1.3.6.1.4.1.97.3.17.1.1.17 | sprotoBootpRelay | 0 | 0 | Specifies whether or not this port is to relay BOOTP packets, as described in RFC-951 and subsequent internet-drafts. Only valid … |
| 1.3.6.1.4.1.97.3.17.1.1.18 | sprotoNetbiosTranslate | 0 | 0 | Specifies whether, when bridging Netbios packets which are source-routing explorer frames, the routing information is to be strip… |
| 1.3.6.1.4.1.97.3.17.1.1.19 | sprotoIpMulticast | 0 | 0 | Specifies whether the internet Multicast Routing Protocol (RFC-1075) is to be used over this port. Only valid if sprotoIpRoute is… |
| 1.3.6.1.4.1.97.3.17.1.1.20 | sprotoTrunking | 0 | 0 | Specifies whether SMC's trunking protocol (an extension to the standard Spanning Tree) is to be used over this port. |
| 1.3.6.1.4.1.97.3.17.1.1.23 | sprotoAllTranslate | 0 | 0 | Specifies whether, when bridging any source-routed explorer frames, the routing information is to be stripped or propagated. If p… |
| 1.3.6.1.4.1.97.3.17.1.1.24 | sprotoSteHopCountAppliedRule | 0 | 0 | hopcountnotapplied(1), STE hop count rules are not applied to STE frames. Default for SR ports. Follows IBM's specifications. hop… |