The byte offset (one being the first byte)
within the loopback packet where lxlpbkErrorSent begins.
This number is automatically reset to zero, whenever
loopback operation is initiated.
Parsed from file ctELS10-mib.mib.txt
Company: cai
Module: CT-ELS10-MIB
lxlpbkErrorOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The byte offset (one being the first byte) within the loopback packet where lxlpbkErrorSent begins. This number is automatically reset to zero, whenever loopback operation is initiated." ::= { lxlpbkEntry 14 }
Vendor: Cabletron
Module: CT-ELS10-MIB (ctELS10-mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.97.7.11.1.1.1 | lxlpbkIndex | 0 | 0 | The port number, beginning with 1 for the first port. |
| 1.3.6.1.4.1.97.7.11.1.1.2 | lxlpbkOperation | 0 | 0 | The type of loopback being performed. Setting lxlpbkOperation to loopback-off causes loop back operation to terminate. Setting lx… |
| 1.3.6.1.4.1.97.7.11.1.1.3 | lxlpbkDestAddr | 0 | 0 | The MAC address of the target device, only needed for remote loopback. |
| 1.3.6.1.4.1.97.7.11.1.1.4 | lxlpbkPktNum | 0 | 0 | The number of loopback packets to be transmitted. |
| 1.3.6.1.4.1.97.7.11.1.1.5 | lxlpbkInterval | 0 | 0 | The desired time delay between the reception of a looped back packet, and the transmission of the next packet to be looped back. |
| 1.3.6.1.4.1.97.7.11.1.1.6 | lxlpbkPktLength | 0 | 0 | The length (in octets) of the loopback packet. The values of the data itself are automatically selected by the ES-10. |
| 1.3.6.1.4.1.97.7.11.1.1.7 | lxlpbkIncrements | 0 | 0 | The number of bytes of data to be added to the loopback packet after each successful loopback packet transmission and reception. … |
| 1.3.6.1.4.1.97.7.11.1.1.8 | lxlpbkGoods | 0 | 0 | The number of packets successfully looped back. This number is automatically reset to zero, whenever loopback operation is initia… |
| 1.3.6.1.4.1.97.7.11.1.1.9 | lxlpbkErrorNoReceives | 0 | 0 | The number of packets which were transmitted, but not received. This number is automatically reset to zero, whenever loopback op… |
| 1.3.6.1.4.1.97.7.11.1.1.10 | lxlpbkErrorBadReceives | 0 | 0 | The number of transmitted packets which were received with different data patterns. This number is automatically reset to zero, w… |
| 1.3.6.1.4.1.97.7.11.1.1.11 | lxlpbkErrorSize | 0 | 0 | The length of the last loopback packet which caused either lxlpbkErrorNoReceives or lxlpbkErrorBadReceives to be incremented. Th… |
| 1.3.6.1.4.1.97.7.11.1.1.12 | lxlpbkErrorSent | 0 | 0 | The transmitted bytes (0-4) of data within the last loopback packet which caused lxlpbkErrorBadReceives to be incremented. This … |
| 1.3.6.1.4.1.97.7.11.1.1.13 | lxlpbkErrorReceived | 0 | 0 | The received bytes (0-4) of data within the last loopback packet which caused lxlpbkErrorBadReceives to be incremented. This par… |