The type of loopback being performed. Setting
lxlpbkOperation to loopback-off causes loop back operation to
terminate. Setting lxlpbkOperation to loopback-local or
loopback-remote causes loopback operation to commence, and
the ES-10 automatically resets lpbkOperation to loopback-off
when the loopback operation has completed.
Parsed from file ctELS10-mib.mib.txt
Company: cai
Module: CT-ELS10-MIB
lxlpbkOperation OBJECT-TYPE SYNTAX INTEGER { loopback-off(1), loopback-local(2), loopback-remote(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of loopback being performed. Setting lxlpbkOperation to loopback-off causes loop back operation to terminate. Setting lxlpbkOperation to loopback-local or loopback-remote causes loopback operation to commence, and the ES-10 automatically resets lpbkOperation to loopback-off when the loopback operation has completed." ::= { lxlpbkEntry 2 }
Vendor: Cabletron
Module: CT-ELS10-MIB (ctELS10-mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.97.7.11.1.1.1 | lxlpbkIndex | 0 | 0 | The port number, beginning with 1 for the first port. |
| 1.3.6.1.4.1.97.7.11.1.1.3 | lxlpbkDestAddr | 0 | 0 | The MAC address of the target device, only needed for remote loopback. |
| 1.3.6.1.4.1.97.7.11.1.1.4 | lxlpbkPktNum | 0 | 0 | The number of loopback packets to be transmitted. |
| 1.3.6.1.4.1.97.7.11.1.1.5 | lxlpbkInterval | 0 | 0 | The desired time delay between the reception of a looped back packet, and the transmission of the next packet to be looped back. |
| 1.3.6.1.4.1.97.7.11.1.1.6 | lxlpbkPktLength | 0 | 0 | The length (in octets) of the loopback packet. The values of the data itself are automatically selected by the ES-10. |
| 1.3.6.1.4.1.97.7.11.1.1.7 | lxlpbkIncrements | 0 | 0 | The number of bytes of data to be added to the loopback packet after each successful loopback packet transmission and reception. … |
| 1.3.6.1.4.1.97.7.11.1.1.8 | lxlpbkGoods | 0 | 0 | The number of packets successfully looped back. This number is automatically reset to zero, whenever loopback operation is initia… |
| 1.3.6.1.4.1.97.7.11.1.1.9 | lxlpbkErrorNoReceives | 0 | 0 | The number of packets which were transmitted, but not received. This number is automatically reset to zero, whenever loopback op… |
| 1.3.6.1.4.1.97.7.11.1.1.10 | lxlpbkErrorBadReceives | 0 | 0 | The number of transmitted packets which were received with different data patterns. This number is automatically reset to zero, w… |
| 1.3.6.1.4.1.97.7.11.1.1.11 | lxlpbkErrorSize | 0 | 0 | The length of the last loopback packet which caused either lxlpbkErrorNoReceives or lxlpbkErrorBadReceives to be incremented. Th… |
| 1.3.6.1.4.1.97.7.11.1.1.12 | lxlpbkErrorSent | 0 | 0 | The transmitted bytes (0-4) of data within the last loopback packet which caused lxlpbkErrorBadReceives to be incremented. This … |
| 1.3.6.1.4.1.97.7.11.1.1.13 | lxlpbkErrorReceived | 0 | 0 | The received bytes (0-4) of data within the last loopback packet which caused lxlpbkErrorBadReceives to be incremented. This par… |
| 1.3.6.1.4.1.97.7.11.1.1.14 | lxlpbkErrorOffset | 0 | 0 | The byte offset (one being the first byte) within the loopback packet where lxlpbkErrorSent begins. This number is automatically … |