If the switch is operating in 802.1Q mode, this selects whether GVRP protocol
messages should be processed and VLANs configured accordingly for each
port on the switch. Each octet within the value of this object specifies a set of eight
ports, with the first octet specifying ports 1 through 8, the next octet specifying ports
9 through 16, etc. Within each octet, the least significant bit represents the
lowest numbered port, and the most significant bit represents the highest numbered port.
Thus, each port of the VLAN bridge is represented by single bit
within the value of this object. If that bit has a value of '1' then that port is
included in the set of ports; the port is not included if its bit has a value of '0'
Parsed from file ctELS10-27mib.txt
Company: None
Module: CT-ELS10-27-MIB
If the switch is operating in 802.1Q mode, this selects whether GVRP protocol
messages should be processed and VLANs configured accordingly for each
port on the switch. Each octet within the value of this object specifies a set of eight
ports, with the first octet specifying ports 1 through 8, the next octet specifying ports
9 through 16, etc. Within each octet, the least significant bit represents the
lowest numbered port, and the most significant bit represents the highest numbered port.
Thus, each port of the VLAN bridge is represented by single bit
within the value of this object. If that bit has a value of '1' then that port is
included in the set of ports; the port is not included if its bit has a value of '0'
Parsed from file CT-ELS10-MIB.mib
Module: CT-ELS10-MIB
els10-27VlanGVRPEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..8)) ACCESS read-write STATUS mandatory DESCRIPTION "If the switch is operating in 802.1Q mode, this selects whether GVRP protocol messages should be processed and VLANs configured accordingly for each port on the switch. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the next octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port. Thus, each port of the VLAN bridge is represented by single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'" ::= { els10-27VlanBridgeConfig 4 }
Vendor: Sigma Network Systems, Inc.
Module: CT-ELS10-27-MIB
[Automatically extracted from oidview.com]
els10-27VlanGVRPEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If the switch is operating in 802.1Q mode, this selects whether GVRP protocol messages should be processed and VLANs configured accordingly for each port on the switch. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the next octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port. Thus, each port of the VLAN bridge is represented by single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'" DEFVAL { disabled } ::= { els10-27VlanBridgeConfig 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.97.9.20.4.0 | els10-27VlanGVRPEnable | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.97.9.20.1 | els10-27VlanVersionNumber | 1 | 1 | Specifies the version IEEE 802.1Q VLAN that has been implemented to. |
| 1.3.6.1.4.1.97.9.20.2 | els10-27VlanOperatingMode | 1 | 1 | Selects the mode of operation. The switch can operate as simply an 802.1d switch, or an 802.1d switch with IEEE VLAN capability… |
| 1.3.6.1.4.1.97.9.20.3 | els10-27VlanResetDefaults | 1 | 1 | To reset the specified bridge. The filtering database is cleared and initialized with the entries specified in the Permananent … |
| 1.3.6.1.4.1.97.9.20.5 | els10-27VlanAccessList | 1 | 1 | A list of ports that should act as 'Access Ports'. These ports will strip all tags on egress and also make use of a shared data… |
| 1.3.6.1.4.1.97.9.20.6 | els10-27VlanConfigVlan | 7 | 35 | None |