A list of ports that should act as 'Access Ports'. These ports will strip all tags
on egress and also make use of a shared database that will automatically be kept by the
firmware. Each octet within the value of this object specifies a set of eight ports, with
the first octet specifying ports 1 through 8, the next octet specifying ports 9 through
16, etc. Within each octet, the least significant bit represents the lowest numbered
port, and the most significant bit represents the highest numbered port. Thus, each port
of the VLAN bridge is represented by single bit within the value of this object. If that
bit has a value of '1' then that port is included in the set of ports; the port is not
included if its bit has a value of '0'
Parsed from file ctELS10-27mib.txt
Company: None
Module: CT-ELS10-27-MIB
A list of ports that should act as 'Access Ports'. These ports will strip all tags
on egress and also make use of a shared database that will automatically be kept by the
firmware. Each octet within the value of this object specifies a set of eight ports, with
the first octet specifying ports 1 through 8, the next octet specifying ports 9 through
16, etc. Within each octet, the least significant bit represents the lowest numbered
port, and the most significant bit represents the highest numbered port. Thus, each port
of the VLAN bridge is represented by single bit within the value of this object. If that
bit has a value of '1' then that port is included in the set of ports; the port is not
included if its bit has a value of '0'
Parsed from file CT-ELS10-MIB.mib
Module: CT-ELS10-MIB
els10-27VlanAccessList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..8)) ACCESS read-write STATUS mandatory DESCRIPTION "A list of ports that should act as 'Access Ports'. These ports will strip all tags on egress and also make use of a shared database that will automatically be kept by the firmware. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the next octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port. Thus, each port of the VLAN bridge is represented by single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'" ::= { els10-27VlanBridgeConfig 5 }
Vendor: Sigma Network Systems, Inc.
Module: CT-ELS10-27-MIB
[Automatically extracted from oidview.com]
els10-27VlanAccessList OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A list of ports that should act as 'Access Ports'. These ports will strip all tags on egress and also make use of a shared database that will automatically be kept by the firmware. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the next octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port. Thus, each port of the VLAN bridge is represented by single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'" ::= { els10-27VlanBridgeConfig 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.97.9.20.5.0 | els10-27VlanAccessList | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.97.9.20.1 | els10-27VlanVersionNumber | 1 | 1 | Specifies the version IEEE 802.1Q VLAN that has been implemented to. |
| 1.3.6.1.4.1.97.9.20.2 | els10-27VlanOperatingMode | 1 | 1 | Selects the mode of operation. The switch can operate as simply an 802.1d switch, or an 802.1d switch with IEEE VLAN capability… |
| 1.3.6.1.4.1.97.9.20.3 | els10-27VlanResetDefaults | 1 | 1 | To reset the specified bridge. The filtering database is cleared and initialized with the entries specified in the Permananent … |
| 1.3.6.1.4.1.97.9.20.4 | els10-27VlanGVRPEnable | 1 | 1 | If the switch is operating in 802.1Q mode, this selects whether GVRP protocol messages should be processed and VLANs configured … |
| 1.3.6.1.4.1.97.9.20.6 | els10-27VlanConfigVlan | 7 | 35 | None |