OID reference

ieee8021CnComPriAutoAltPri

1.0.8802.1.1.18.1.3.1.5

Description

The Congestion Notification Priority Value to which an incoming frame can be mapped, in spite of what the Priority Regereration Table says, if 1) Congestion Notification is enabled, 2) the CND defense mode of the port is cptEdge, and 3) ieee8021CnComPriDefModeChoice contains the value cpcAuto (2). The value of this ob…

Full description and source information

Identification

Identifier and names

Parent
1.0.8802.1.1.18.1.3.1 (ieee8021CnCompntPriEntry)
Node code
5
Node name
ieee8021CnComPriAutoAltPri
Category
SNMP management object
Numeric OID
1.0.8802.1.1.18.1.3.1.5
URN notation
urn:oid:1.0.8802.1.1.18.1.3.1.5
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 0 8802 1 1 18 1 3 1 5}

  • {iso(1) standard(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) ieee8021CnMib(18) ieee8021CnMIBObjects(1) ieee8021CnCompntPriTable(3) ieee8021CnCompntPriEntry(1) ieee8021CnComPriAutoAltPri(5)}
  • {iso(1) std(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) ieee8021CnMib(18) ieee8021CnMIBObjects(1) ieee8021CnCompntPriTable(3) ieee8021CnCompntPriEntry(1) ieee8021CnComPriAutoAltPri(5)}
  • {iso(1) iso-standard(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) ieee8021CnMib(18) ieee8021CnMIBObjects(1) ieee8021CnCompntPriTable(3) ieee8021CnCompntPriEntry(1) ieee8021CnComPriAutoAltPri(5)}
  • {iso(1) oidISO(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) ieee8021CnMib(18) ieee8021CnMIBObjects(1) ieee8021CnCompntPriTable(3) ieee8021CnCompntPriEntry(1) ieee8021CnComPriAutoAltPri(5)}
OID-IRI notation
  • /1/0/8802/1/1/18/1/3/1/5
  • /ISO/Standard/8802/1/1/18/1/3/1/5
  • /ISO/0/8802/1/1/18/1/3/1/5
Named path variants
  • /iso/standard/iso8802/ieee802dot1/ieee802dot1mibs/ieee8021CnMib/ieee8021CnMIBObjects/ieee8021CnCompntPriTable/ieee8021CnCompntPriEntry/ieee8021CnComPriAutoAltPri
  • /iso/std/iso8802/ieee802dot1/ieee802dot1mibs/ieee8021CnMib/ieee8021CnMIBObjects/ieee8021CnCompntPriTable/ieee8021CnCompntPriEntry/ieee8021CnComPriAutoAltPri
  • /iso/iso-standard/iso8802/ieee802dot1/ieee802dot1mibs/ieee8021CnMib/ieee8021CnMIBObjects/ieee8021CnCompntPriTable/ieee8021CnCompntPriEntry/ieee8021CnComPriAutoAltPri
  • /iso/oidISO/iso8802/ieee802dot1/ieee802dot1mibs/ieee8021CnMib/ieee8021CnMIBObjects/ieee8021CnCompntPriTable/ieee8021CnCompntPriEntry/ieee8021CnComPriAutoAltPri

SNMP properties

Value type
IEEE8021PriorityValue
Maximum access defined by MIB
read-only
Status in MIB
current

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

ieee8021CnComPriAutoAltPri OBJECT-TYPE 
          SYNTAX IEEE8021PriorityValue 
          MAX-ACCESS read-only 
          STATUS current 
          DESCRIPTION 
              "The Congestion Notification Priority Value to which an 
               incoming frame can be mapped, in spite of what the 
               Priority Regereration Table says, if 1) Congestion 
               Notification is enabled, 2) the CND defense mode of the 
               port is cptEdge, and 3) ieee8021CnComPriDefModeChoice 
               contains the value cpcAuto (2).

               The value of this object is the next lower priority value 
                than this row's ieee8021CnComPriPriority that is not a CNPV, 
                or the next higher non-CNPV, if all lower values are CNPVs.
         
               The value of this object, and any consequent priority 
               regeneration, is automatically updated by the managed system 
               whenever a row in the ieee8021CnCompntPriTable is created 
               ordeleted. The value of this object is not dependent upon 
               whether congestion notification is enabled or disabled for any 
               priority or for the whole bridge component or end station; it 
               depends only upon whether the ieee8021CnCompntPriTable 
               rowexists. "

          REFERENCE
             "802.1Qau clauses 32.3.3"


          ::= { ieee8021CnCompntPriEntry 5 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The Congestion Notification Priority Value to which an incoming frame can be mapped, in spite of what the Priority Regereration Table says, if 1) Congestion Notification is enabled, 2) the CND defense mode of the port is cptEdge, and 3) ieee8021CnComPriDefModeChoice contains the value cpcAuto (2). The value of this object is the next lower priority value than this row's ieee8021CnComPriPriority that is not a CNPV, or the next higher non-CNPV, if all lower values are CNPVs. The value of this object, and any consequent priority regeneration, is automatically updated by the managed system whenever a row in the ieee8021CnCompntPriTable is created ordeleted. The value of this object is not dependent upon whether congestion notification is enabled or disabled for any priority or for the whole bridge component or end station; it depends only upon whether the ieee8021CnCompntPriTable rowexists.

Sources for this description

Belden, GarrettCom and Hirschmann IT official standalone MIBs

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Belden, GarrettCom and Hirschmann IT official standalone MIBs1 record · 1 source

Description 1

ieee8021CnComPriAutoAltPri · currentBelden, GarrettCom and Hirschmann IT official standalone MIBs1 source

Status in source: current.

Names: ieee8021CnComPriAutoAltPri

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "ieee8021CnComPriAutoAltPri",
    "OBJECT-TYPE",
    "SYNTAX",
    "IEEE8021PriorityValue",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The Congestion Notification Priority Value to which an incoming frame can be mapped, in spite of what the Priority Regereration Table says, if 1) Congestion Notification is enabled, 2) the CND defense mode of the port is cptEdge, and 3) ieee8021CnComPriDefModeChoice contains the value cpcAuto (2). The value of this object is the next lower priority value than this row's ieee8021CnComPriPriority that is not a CNPV, or the next higher non-CNPV, if all lower values are CNPVs. The value of this object, and any consequent priority regeneration, is automatically updated by the managed system whenever a row in the ieee8021CnCompntPriTable is created ordeleted. The value of this object is not dependent upon whether congestion notification is enabled or disabled for any priority or for the whole bridge component or end station; it depends only upon whether the ieee8021CnCompntPriTable rowexists. \"",
    "REFERENCE",
    "\"802.1Qau clauses 32.3.3\"",
    "::=",
    "{",
    "ieee8021CnCompntPriEntry",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "IEEE8021PriorityValue"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The Congestion Notification Priority Value to which an incoming frame can be mapped, in spite of what the Priority Regereration Table says, if 1) Congestion Notification is enabled, 2) the CND defense mode of the port is cptEdge, and 3) ieee8021CnComPriDefModeChoice contains the value cpcAuto (2). The value of this object is the next lower priority value than this row's ieee8021CnComPriPriority that is not a CNPV, or the next higher non-CNPV, if all lower values are CNPVs. The value of this object, and any consequent priority regeneration, is automatically updated by the managed system whenever a row in the ieee8021CnCompntPriTable is created ordeleted. The value of this object is not dependent upon whether congestion notification is enabled or disabled for any priority or for the whole bridge component or end station; it depends only upon whether the ieee8021CnCompntPriTable rowexists."
    ],
    [
      "REFERENCE",
      "802.1Qau clauses 32.3.3"
    ],
    null,
    null,
    null
  ]
}

Registration

Registration authorities

Current Registration Authority (inferred from ancestor 1.0)

ISO and IEC

Siblings (9)

OIDNameDirect childrenDescendantsDescription
1.0.8802.1.1.18.1.3.1.1 ieee8021CnComPriComponentId00
1.0.8802.1.1.18.1.3.1.2 ieee8021CnComPriPriority00
1.0.8802.1.1.18.1.3.1.3 ieee8021CnComPriDefModeChoice00
1.0.8802.1.1.18.1.3.1.4 ieee8021CnComPriAlternatePriority00
1.0.8802.1.1.18.1.3.1.6 ieee8021CnComPriAdminDefenseMode00
1.0.8802.1.1.18.1.3.1.7 ieee8021CnComPriCreation00
1.0.8802.1.1.18.1.3.1.8 ieee8021CnComPriLldpInstanceChoice00
1.0.8802.1.1.18.1.3.1.9 ieee8021CnComPriLldpInstanceSelector00
1.0.8802.1.1.18.1.3.1.10 ieee8021CnComPriRowStatus00