Description 1
includes the IEEE 802.3 organizationally defined set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management. Each bit in the bitmap corresponds
to an IEEE 802.3 subtype associated with a specific IEEE
802.3 optional TLV. The bit 0 is not used since there is
no corresponding subtype.
The bit 'macPhyConfigStatus(0)' indicates that LLDP agent
should transmit 'MAC/PHY configuration/status TLV'.
The bit 'powerViaMDI(1)' indicates that LLDP agent should
transmit 'Power via MDI TLV'.
The bit 'linkAggregation(2)' indicates that LLDP agent should
transmit 'Link Aggregation TLV'.
The bit 'maxFrameSize(3)' indicates that LLDP agent should
transmit 'Maximum-frame-size TLV'.
The default value for lldpXdot3PortConfigTLVsTxEnable object
is an empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.
Sources for this description
Belden, GarrettCom and Hirschmann IT official standalone MIBsD-Link official switch MIBsFS.COM official Documentation Hub native MIB packagesHPE Instant On official MIBsMIBdepotCommon and standard MIB copies (LibreNMS/Observium Community)NETGEAR official product and EOL MIB downloads
Circitor
Parsed from LLDP-EXT-DOT3-MIB.mib · LLDP-EXT-DOT3-MIB
Source file: Download LLDP-EXT-DOT3-MIB.mib
Cisco
Source file: Download LLDP-EXT-DOT3-MIB.mib · Publisher's file
Source file: Download lldp_dot3_mib.my · Publisher's file
Source file: Download lldp_dot3_mib.my · Publisher's file
Cisco SMIv1
Source file: Download LLDP-EXT-DOT3-MIB-V1SMI.my · Publisher's file
IEEE 802
Source file: Download LLDP-EXT-DOT3-MIB-200505060000Z.mib · Publisher's file