OID reference

lldpXMedPortConfigTLVsTxEnable

1.0.8802.1.1.2.1.5.4795.1.1.2.1.2

Description

The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap, includes the MED organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the b…

Full description and source information

Identification

Identifier and names

Parent
1.0.8802.1.1.2.1.5.4795.1.1.2.1 (lldpXMedPortConfigEntry)
Node code
2
Node name
lldpXMedPortConfigTLVsTxEnable
Category
SNMP management object
Numeric OID
1.0.8802.1.1.2.1.5.4795.1.1.2.1.2
URN notation
urn:oid:1.0.8802.1.1.2.1.5.4795.1.1.2.1.2
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 0 8802 1 1 2 1 5 4795 1 1 2 1 2}

  • {iso(1) standard(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) ieee8021lldp(2) lldpObjects(1) lldpExtensions(5) lldpXMedMIB(4795) lldpXMedObjects(1) lldpXMedConfig(1) lldpXMedPortConfigTable(2) lldpXMedPortConfigEntry(1) lldpXMedPortConfigTLVsTxEnable(2)}
  • {iso(1) standard(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) lldpMIB(2) lldpObjects(1) lldpExtensions(5) lldpXMedMIB(4795) lldpXMedObjects(1) lldpXMedConfig(1) lldpXMedPortConfigTable(2) lldpXMedPortConfigEntry(1) lldpXMedPortConfigTLVsTxEnable(2)}
  • {iso(1) std(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) ieee8021lldp(2) lldpObjects(1) lldpExtensions(5) lldpXMedMIB(4795) lldpXMedObjects(1) lldpXMedConfig(1) lldpXMedPortConfigTable(2) lldpXMedPortConfigEntry(1) lldpXMedPortConfigTLVsTxEnable(2)}
  • {iso(1) std(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) lldpMIB(2) lldpObjects(1) lldpExtensions(5) lldpXMedMIB(4795) lldpXMedObjects(1) lldpXMedConfig(1) lldpXMedPortConfigTable(2) lldpXMedPortConfigEntry(1) lldpXMedPortConfigTLVsTxEnable(2)}
  • {iso(1) iso-standard(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) ieee8021lldp(2) lldpObjects(1) lldpExtensions(5) lldpXMedMIB(4795) lldpXMedObjects(1) lldpXMedConfig(1) lldpXMedPortConfigTable(2) lldpXMedPortConfigEntry(1) lldpXMedPortConfigTLVsTxEnable(2)}
  • {iso(1) iso-standard(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) lldpMIB(2) lldpObjects(1) lldpExtensions(5) lldpXMedMIB(4795) lldpXMedObjects(1) lldpXMedConfig(1) lldpXMedPortConfigTable(2) lldpXMedPortConfigEntry(1) lldpXMedPortConfigTLVsTxEnable(2)}
  • {iso(1) oidISO(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) ieee8021lldp(2) lldpObjects(1) lldpExtensions(5) lldpXMedMIB(4795) lldpXMedObjects(1) lldpXMedConfig(1) lldpXMedPortConfigTable(2) lldpXMedPortConfigEntry(1) lldpXMedPortConfigTLVsTxEnable(2)}
  • {iso(1) oidISO(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) lldpMIB(2) lldpObjects(1) lldpExtensions(5) lldpXMedMIB(4795) lldpXMedObjects(1) lldpXMedConfig(1) lldpXMedPortConfigTable(2) lldpXMedPortConfigEntry(1) lldpXMedPortConfigTLVsTxEnable(2)}
OID-IRI notation
  • /1/0/8802/1/1/2/1/5/4795/1/1/2/1/2
  • /ISO/Standard/8802/1/1/2/1/5/4795/1/1/2/1/2
  • /ISO/0/8802/1/1/2/1/5/4795/1/1/2/1/2
Named path variants
  • /iso/standard/iso8802/ieee802dot1/ieee802dot1mibs/ieee8021lldp/lldpObjects/lldpExtensions/lldpXMedMIB/lldpXMedObjects/lldpXMedConfig/lldpXMedPortConfigTable/lldpXMedPortConfigEntry/lldpXMedPortConfigTLVsTxEnable
  • /iso/standard/iso8802/ieee802dot1/ieee802dot1mibs/lldpMIB/lldpObjects/lldpExtensions/lldpXMedMIB/lldpXMedObjects/lldpXMedConfig/lldpXMedPortConfigTable/lldpXMedPortConfigEntry/lldpXMedPortConfigTLVsTxEnable
  • /iso/std/iso8802/ieee802dot1/ieee802dot1mibs/ieee8021lldp/lldpObjects/lldpExtensions/lldpXMedMIB/lldpXMedObjects/lldpXMedConfig/lldpXMedPortConfigTable/lldpXMedPortConfigEntry/lldpXMedPortConfigTLVsTxEnable
  • /iso/std/iso8802/ieee802dot1/ieee802dot1mibs/lldpMIB/lldpObjects/lldpExtensions/lldpXMedMIB/lldpXMedObjects/lldpXMedConfig/lldpXMedPortConfigTable/lldpXMedPortConfigEntry/lldpXMedPortConfigTLVsTxEnable
  • /iso/iso-standard/iso8802/ieee802dot1/ieee802dot1mibs/ieee8021lldp/lldpObjects/lldpExtensions/lldpXMedMIB/lldpXMedObjects/lldpXMedConfig/lldpXMedPortConfigTable/lldpXMedPortConfigEntry/lldpXMedPortConfigTLVsTxEnable
  • /iso/iso-standard/iso8802/ieee802dot1/ieee802dot1mibs/lldpMIB/lldpObjects/lldpExtensions/lldpXMedMIB/lldpXMedObjects/lldpXMedConfig/lldpXMedPortConfigTable/lldpXMedPortConfigEntry/lldpXMedPortConfigTLVsTxEnable
  • /iso/oidISO/iso8802/ieee802dot1/ieee802dot1mibs/ieee8021lldp/lldpObjects/lldpExtensions/lldpXMedMIB/lldpXMedObjects/lldpXMedConfig/lldpXMedPortConfigTable/lldpXMedPortConfigEntry/lldpXMedPortConfigTLVsTxEnable
  • /iso/oidISO/iso8802/ieee802dot1/ieee802dot1mibs/lldpMIB/lldpObjects/lldpExtensions/lldpXMedMIB/lldpXMedObjects/lldpXMedConfig/lldpXMedPortConfigTable/lldpXMedPortConfigEntry/lldpXMedPortConfigTLVsTxEnable

SNMP properties

Value type
LldpXMedCapabilities
Maximum access defined by MIB
read-write
Status in MIB
current, mandatory
Default value
'00'h

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), MIBdepot, and others

Value type
LldpXMedCapabilities
Maximum access defined by MIB
read-write
Status in MIB
current

Variant 2 — Cisco SMIv1

Value type
LldpXMedCapabilities
Maximum access defined by MIB
read-write
Status in MIB
mandatory
Default value
'00'h

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Product context

Documented MIB packages

The FS.COM catalogue lists MIB packages containing this definition for these models:

IES3110-8TFP-R, IES3220-8T4F, IES3220-8T4F-U, IES5120-28TF, IES5120-28TS, IES5120-28TS-P, IES5120-48T4S, IES5220-30TS-3ES, IES5220-6S-3ES, N5860-48SC, N8560-32C, N8560-48BC.

Show 22 more models

N8560-64C, NC8200-16Q, NC8200-24BC, NC8200-4TD, NC8200-8C, NC8400-16CD, NC8400-32C, NC8400-4TH, S3100-16TF, S3410-24TS-P, S3910-24TS, S3910-48TS, S5810-28FS, S5810-28TS, S5810-48FS, S5810-48TS, S5810-48TS-P, S5860-20SQ, S5860-24XB-U, S5860-48SC, TSN3220-10S, TSN3220-10S-U.

A definition in a model's MIB package does not establish that the device implements it or permits access.

The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:

These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.

Available source records contain 1 distinct definition; some records may not include a definition.

Show 1 published definition

lldpXMedPortConfigTLVsTxEnable · current

lldpXMedPortConfigTLVsTxEnable  OBJECT-TYPE
    SYNTAX      LldpXMedCapabilities
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap,
            includes the MED organizationally defined set of LLDP
            TLVs whose transmission is allowed on the local LLDP agent by
            the network management.  Each bit in the bitmap corresponds
            to an LLDP-MED subtype associated with a specific TIA TR41.4 MED 
            optional TLV. If the bit is set, the agent will send the 
            corresponding TLV if the respective capability is supported per 
            port.

            Setting a bit with in this object for a non-supported capability
            shall have no functional effect and will result in an inconsistent
            value error returned to the management application. 
 
            There are other rules and restrictions that prevent arbitrary
            combinations of TLVs to be enabled on LLDP-MED devices according to
            the device classes. These rules are defined in Section 10.2.1, 
            Tables 5 - 9 of ANSI/TIA-1057. In case a management application 
            attempts to set this object to a value that does not follow the rules, 
            the set operation shall have and will result in an inconsistent 
            value error returned to the management application. 

            Setting this object to an empty set is valid and effectively 
            disables LLDP-MED on a per-port basis by disabling transmission of 
            all MED organizational TLVs. In this case the remote tables objects 
            in the LLDP-MED MIB corresponding to the respective port will not 
            be populated. 
             
            The default value for lldpXMedPortConfigTLVsTxEnable object
            is an empty set, which means no enumerated values are set.

            The value of this object must be restored from non-volatile
            storage after a re-initialization of the management system."
    REFERENCE 
            "ANSI/TIA-1057, Section 10.2.2.3"
    ::= { lldpXMedPortConfigEntry  2 }

Meaning

Descriptions

2 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap,
includes the MED organizationally defined set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management. Each bit in the bitmap corresponds
to an LLDP-MED subtype associated with a specific TIA TR41.4 MED
optional TLV. If the bit is set, the agent will send the
corresponding TLV if the respective capability is supported per
port.

Setting a bit with in this object for a non-supported capability
shall have no functional effect and will result in an inconsistent
value error returned to the management application.

There are other rules and restrictions that prevent arbitrary
combinations of TLVs to be enabled on LLDP-MED devices according to
the device classes. These rules are defined in Section 10.2.1,
Tables 5 - 9 of ANSI/TIA-1057. In case a management application
attempts to set this object to a value that does not follow the rules,
the set operation shall have and will result in an inconsistent
value error returned to the management application.

Setting this object to an empty set is valid and effectively
disables LLDP-MED on a per-port basis by disabling transmission of
all MED organizational TLVs. In this case the remote tables objects
in the LLDP-MED MIB corresponding to the respective port will not
be populated.

The default value for lldpXMedPortConfigTLVsTxEnable object
is an empty set, which means no enumerated values are set.

The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.
Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Circitor

Parsed from LLDP-EXT-MED-MIB.mib · LLDP-EXT-MED-MIB

Source file: Download LLDP-EXT-MED-MIB.mib

Browse all files from Circitor

Cisco

Source file: Download Web_OpenRail_07103.zip — Railswitch/lldp_med.mib · Publisher's file

Other official packages with the same file

069Qp00000jtKE6IAM

Source file: Download Web_RSR_09116.zip — RSR/MIBs/lldp_med.mib · Publisher's file

Other official packages with the same file

069Qp00000juIrZIAU

069Qp00000juETAIA2

069Qp00000juDgfIAE

069Qp00000juDbrIAE

Source file: Download LLDP-EXT-MED-MIB.my · Publisher's file

Vendor MIB copy from the Netdisco archive.

Source file: Download lldp-ext-med.mib · Publisher's file

Other official packages with the same file

tsn3220-10s-u-switch-snmp-mib-files.zip

tsn3220-10s-switch-snmp-mib-files.zip

ies5220-6s-3es-switch-snmp-mib-files.zip

ies5220-30ts-3es-switch-snmp-mib-files.zip

Source file: Download LLDP-EXT-MED-MIB.txt · Publisher's file

Related source files and packages:

Source file: Download LLDP-EXT-MED-MIB.mib · Publisher's file

Other official packages with the same file

s3100-16tf-switch-snmp-mib-files.zip

s5860-series-swithes-snmp-mib-files.zip

s3910-series-swithes-snmp-mib-files.zip

s3410-series-swithes-snmp-mib-files.zip

Source file: Download LLDP-EXT-MED-MIB.txt · Publisher's file

Related source files and packages:

Source file: Download lldp_ext_med_mib.my · Publisher's file

Other official packages with the same file

xsm72xxs-v9.0.1.46-mibs.zip

XS508TM_XS516TM-v7.8.11.13-Mibs.zip

mibs-m4500-48xf8c-7.0.5.6.tar.bz2

mibs-m4500-48xf8c-7.0.4.30.tar.bz2

Source file: Download lldp_ext_med_mib.my · Publisher's file

Other official packages with the same file

xs7xxt_6.6.3.2-mibs.zip

xs712t-v6.1.0.36-mibs.zip

xs712t-v6.1.0.34-mibs.zip

xs7xxt6.6.3.3-mibs.zip

Source file: Download lldp_ext_med_mib.my · Publisher's file

Other official packages with the same file

xs7xxtv7.0.0.24-mibs.zip

xs7xxtv7.0.0.20-mibs.zip

s3300v6.6.4.26-mibs.zip

s3300v6.6.4.25-mibs.zip

Browse all files from Cisco

Description 2

Enabled MED TLVs.

Sources for this description

H3C official MIB documentation and object descriptions

See 1 matching source record

Evidence

Source records

2 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 2H3C official MIB documentation and object descriptions1 record · 40 sources

Description 2

lldpXMedPortConfigTLVsTxEnable · unspecifiedH3C official MIB documentation and object descriptions40 sources

Status in source: unspecified.

Names: lldpXMedPortConfigTLVsTxEnable

Technical details
{}

Browse all 40 supporting sources

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

lldpXMedPortConfigTLVsTxEnable · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: lldpXMedPortConfigTLVsTxEnable

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "lldpXMedPortConfigTLVsTxEnable",
    "OBJECT-TYPE",
    "SYNTAX",
    "LldpXMedCapabilities",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap, includes the MED organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent will send the corresponding TLV if the respective capability is supported per port. Setting a bit with in this object for a non-supported capability shall have no functional effect and will result in an inconsistent value error returned to the management application. There are other rules and restrictions that prevent arbitrary combinations of TLVs to be enabled on LLDP-MED devices according to the device classes. These rules are defined in Section 10.2.1, Tables 5 - 9 of ANSI/TIA-1057. In case a management application attempts to set this object to a value that does not follow the rules, the set operation shall have and will result in an inconsistent value error returned to the management application. Setting this object to an empty set is valid and effectively disables LLDP-MED on a per-port basis by disabling transmission of all MED organizational TLVs. In this case the remote tables objects in the LLDP-MED MIB corresponding to the respective port will not be populated. The default value for lldpXMedPortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.\"",
    "REFERENCE",
    "\"ANSI/TIA-1057, Section 10.2.2.3\"",
    "::=",
    "{",
    "lldpXMedPortConfigEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "LldpXMedCapabilities"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap, includes the MED organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent will send the corresponding TLV if the respective capability is supported per port. Setting a bit with in this object for a non-supported capability shall have no functional effect and will result in an inconsistent value error returned to the management application. There are other rules and restrictions that prevent arbitrary combinations of TLVs to be enabled on LLDP-MED devices according to the device classes. These rules are defined in Section 10.2.1, Tables 5 - 9 of ANSI/TIA-1057. In case a management application attempts to set this object to a value that does not follow the rules, the set operation shall have and will result in an inconsistent value error returned to the management application. Setting this object to an empty set is valid and effectively disables LLDP-MED on a per-port basis by disabling transmission of all MED organizational TLVs. In this case the remote tables objects in the LLDP-MED MIB corresponding to the respective port will not be populated. The default value for lldpXMedPortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set. The value of this object must be restored from non-volatile storage after a re-initialization of the management system."
    ],
    [
      "REFERENCE",
      "ANSI/TIA-1057, Section 10.2.2.3"
    ],
    null,
    null,
    null
  ]
}

Historical records

Additional source information

Information from Circitor
lldpXMedPortConfigTLVsTxEnable  OBJECT-TYPE
    SYNTAX      LldpXMedCapabilities
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap,
            includes the MED organizationally defined set of LLDP
            TLVs whose transmission is allowed on the local LLDP agent by
            the network management.  Each bit in the bitmap corresponds
            to an LLDP-MED subtype associated with a specific TIA TR41.4 MED 
            optional TLV. If the bit is set, the agent will send the 
            corresponding TLV if the respective capability is supported per 
            port.

            Setting a bit with in this object for a non-supported capability
            shall have no functional effect and will result in an inconsistent
            value error returned to the management application. 
 
            There are other rules and restrictions that prevent arbitrary
            combinations of TLVs to be enabled on LLDP-MED devices according to
            the device classes. These rules are defined in Section 10.2.1, 
            Tables 5 - 9 of ANSI/TIA-1057. In case a management application 
            attempts to set this object to a value that does not follow the rules, 
            the set operation shall have and will result in an inconsistent 
            value error returned to the management application. 

            Setting this object to an empty set is valid and effectively 
            disables LLDP-MED on a per-port basis by disabling transmission of 
            all MED organizational TLVs. In this case the remote tables objects 
            in the LLDP-MED MIB corresponding to the respective port will not 
            be populated. 
             
            The default value for lldpXMedPortConfigTLVsTxEnable object
            is an empty set, which means no enumerated values are set.

            The value of this object must be restored from non-volatile
            storage after a re-initialization of the management system."
    REFERENCE 
            "ANSI/TIA-1057, Section 10.2.2.3"
    DEFVAL  { { } }
    ::= { lldpXMedPortConfigEntry  2 }
Information from Cisco SMIv1
lldpXMedPortConfigTLVsTxEnable OBJECT-TYPE
    SYNTAX LldpXMedCapabilities








    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap,
        includes the MED organizationally defined set of LLDP
        TLVs whose transmission is allowed on the local LLDP agent by
        the network management.  Each bit in the bitmap corresponds
        to an LLDP-MED subtype associated with a specific TIA TR41.4 MED 
        optional TLV. If the bit is set, the agent will send the 
        corresponding TLV if the respective capability is supported per 
        port.
        
        Setting a bit with in this object for a non-supported capability
        shall have no functional effect and will result in an inconsistent
        value error returned to the management application. 
        
        There are other rules and restrictions that prevent arbitrary
        combinations of TLVs to be enabled on LLDP-MED devices according to
        the device classes. These rules are defined in Section 10.2.1, 
        Tables 5 - 9 of ANSI/TIA-1057. In case a management application 
        attempts to set this object to a value that does not follow the rules, 
        the set operation shall have and will result in an inconsistent 
        value error returned to the management application. 
        
        Setting this object to an empty set is valid and effectively 
        disables LLDP-MED on a per-port basis by disabling transmission of 
        all MED organizational TLVs. In this case the remote tables objects 
        in the LLDP-MED MIB corresponding to the respective port will not 
        be populated. 
         
        The default value for lldpXMedPortConfigTLVsTxEnable object
        is an empty set, which means no enumerated values are set.
        
        The value of this object must be restored from non-volatile
        storage after a re-initialization of the management system."
    REFERENCE
        "ANSI/TIA-1057, Section 10.2.2.3"
    DEFVAL { '00'h }
    ::= { lldpXMedPortConfigEntry 2 }
Information from OID Repository
Vendor: Avaya
Module: LLDP-EXT-MED-MIB (LLDP-EXT-MED-MIB.mib)
Type: TABULAR
Access: read-write
Syntax: LldpXMedCapabilities

Automatically extracted from www.mibdepot.com
Information from MIBdepot
lldpXMedPortConfigTLVsTxEnable  OBJECT-TYPE
    SYNTAX      LldpXMedCapabilities
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap,
            includes the MED organizationally defined set of LLDP
            TLVs whose transmission is allowed on the local LLDP agent by
            the network management.  Each bit in the bitmap corresponds
            to an LLDP-MED subtype associated with a specific TIA TR41.4 MED 
            optional TLV. If the bit is set, the agent will send the 
            corresponding TLV if the respective capability is supported per 
            port.

            Setting a bit with in this object for a non-supported capability
            shall have no functional effect and will result in an inconsistent
            value error returned to the management application. 
 
            There are other rules and restrictions that prevent arbitrary
            combinations of TLVs to be enabled on LLDP-MED devices according to
            the device classes. These rules are defined in Section 10.2.1, 
            Tables 5 - 9 of ANSI/TIA-1057. In case a management application 
            attempts to set this object to a value that does not follow the rules, 
            the set operation shall have and will result in an inconsistent 
            value error returned to the management application. 

            Setting this object to an empty set is valid and effectively 
            disables LLDP-MED on a per-port basis by disabling transmission of 
            all MED organizational TLVs. In this case the remote tables objects 
            in the LLDP-MED MIB corresponding to the respective port will not 
            be populated. 
             
            The default value for lldpXMedPortConfigTLVsTxEnable object
            is an empty set, which means no enumerated values are set.

            The value of this object must be restored from non-volatile
            storage after a re-initialization of the management system."
    REFERENCE 
            "ANSI/TIA-1057, Section 10.2.2.3"
    DEFVAL  { { } }
    ::= { lldpXMedPortConfigEntry  2 }
Information from Cisco
lldpXMedPortConfigTLVsTxEnable  OBJECT-TYPE
    SYNTAX      LldpXMedCapabilities
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap,
            includes the MED organizationally defined set of LLDP
            TLVs whose transmission is allowed on the local LLDP agent by
            the network management.  Each bit in the bitmap corresponds
            to an LLDP-MED subtype associated with a specific TIA TR41.4 MED 
            optional TLV. If the bit is set, the agent will send the 
            corresponding TLV if the respective capability is supported per 
            port.

            Setting a bit with in this object for a non-supported capability
            shall have no functional effect and will result in an inconsistent
            value error returned to the management application. 
 
            There are other rules and restrictions that prevent arbitrary
            combinations of TLVs to be enabled on LLDP-MED devices according to
            the device classes. These rules are defined in Section 10.2.1, 
            Tables 5 - 9 of ANSI/TIA-1057. In case a management application 
            attempts to set this object to a value that does not follow the rules, 
            the set operation shall have and will result in an inconsistent 
            value error returned to the management application. 

            Setting this object to an empty set is valid and effectively 
            disables LLDP-MED on a per-port basis by disabling transmission of 
            all MED organizational TLVs. In this case the remote tables objects 
            in the LLDP-MED MIB corresponding to the respective port will not 
            be populated. 
             
            The default value for lldpXMedPortConfigTLVsTxEnable object
            is an empty set, which means no enumerated values are set.

            The value of this object must be restored from non-volatile
            storage after a re-initialization of the management system."
    REFERENCE 
            "ANSI/TIA-1057, Section 10.2.2.3"
    DEFVAL  { { } }
    ::= { lldpXMedPortConfigEntry  2 }

Registration

Registration authorities

Current Registration Authority (inferred from ancestor 1.0)

ISO and IEC

Siblings (2)

OIDNameDirect childrenDescendantsDescription
1.0.8802.1.1.2.1.5.4795.1.1.2.1.1 lldpXMedPortCapSupported00 The bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible for the respective port
on t…
1.0.8802.1.1.2.1.5.4795.1.1.2.1.3 lldpXMedPortConfigNotifEnable00 A value of 'true(1)' enables sending the topology change
traps on this port.
A value of 'false(2)' disables sending the topology …