An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used if the device is using priority tagged frames, meaning that only the 802.1p priority level is significant and the default VID of the ingress port is bei…
Definitions may combine these properties differently.
Compare 2 source variants
Variant 1 — Cisco SMIv1
Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
mandatory
Variant 2 — MIBdepot, Circitor, and others
Value type
Integer32
Maximum access defined by MIB
read-only
Status in MIB
current
Using this OID with SNMP
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
Documented MIB packages
The FS.COM catalogue lists MIB packages containing this definition for these models:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Meaning
Descriptions
2 unique
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998.
A value of 1 through 4094 is used to define a valid PVID.
A value of 0 shall be used if the device is using priority tagged frames, meaning that only the 802.1p priority level is significant and the default VID of the ingress port is being used instead.
A value of 4095 is reserved for implementation use.
lldpXMedLocMediaPolicyVlanID OBJECT-TYPE
SYNTAX Integer32 (0|1..4094|4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An extension of the VLAN Identifier for the port,
as defined in IEEE 802.1P-1998.
A value of 1 through 4094 is used to define a valid PVID.
A value of 0 shall be used if the device is using priority tagged
frames, meaning that only the 802.1p priority level is significant
and the default VID of the ingress port is being used instead.
A value of 4095 is reserved for implementation use."
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.5"
::= { lldpXMedLocMediaPolicyEntry 2 }
Information from Cisco SMIv1
lldpXMedLocMediaPolicyVlanID OBJECT-TYPE
SYNTAX INTEGER(0|1..4094|4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An extension of the VLAN Identifier for the port,
as defined in IEEE 802.1P-1998.
A value of 1 through 4094 is used to define a valid PVID.
A value of 0 shall be used if the device is using priority tagged
frames, meaning that only the 802.1p priority level is significant
and the default VID of the ingress port is being used instead.
A value of 4095 is reserved for implementation use."
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.5"
::= { lldpXMedLocMediaPolicyEntry 2 }
lldpXMedLocMediaPolicyVlanID OBJECT-TYPE
SYNTAX Integer32 (0|1..4094|4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An extension of the VLAN Identifier for the port,
as defined in IEEE 802.1P-1998.
A value of 1 through 4094 is used to define a valid PVID.
A value of 0 shall be used if the device is using priority tagged
frames, meaning that only the 802.1p priority level is significant
and the default VID of the ingress port is being used instead.
A value of 4095 is reserved for implementation use."
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.5"
::= { lldpXMedLocMediaPolicyEntry 2 }
Information from Cisco
lldpXMedLocMediaPolicyVlanID OBJECT-TYPE
SYNTAX Integer32 (0|1..4094|4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An extension of the VLAN Identifier for the port,
as defined in IEEE 802.1P-1998.
A value of 1 through 4094 is used to define a valid PVID.
A value of 0 shall be used if the device is using priority tagged
frames, meaning that only the 802.1p priority level is significant
and the default VID of the ingress port is being used instead.
A value of 4095 is reserved for implementation use."
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.5"
::= { lldpXMedLocMediaPolicyEntry 2 }
Registration
Registration authorities
Current Registration Authority (inferred from ancestor 1.0)