OID reference

bgpPeergrAddrSourceType

1.2.826.42.1.1578918.5.65.1.5.7.1.64

Description

The address type of the bgpPeergrAddrSource field. Setting this field to the default value means that bgpPeergrAddrSource is unspecified. This field is ignored for peers identified only by interface (bgpPeerLocalAddr and bgpPeerRemoteAddr are both zero). An AMB_INETWK_ADDR_TYPE_IPV6 must always be global. This field c…

Full description and source information

Identification

Identifier and names

Parent
1.2.826.42.1.1578918.5.65.1.5.7.1 (bgpPeergrEntry)
Node code
64
Node name
bgpPeergrAddrSourceType
Category
SNMP management object
Numeric OID
1.2.826.42.1.1578918.5.65.1.5.7.1.64
URN notation
urn:oid:1.2.826.42.1.1578918.5.65.1.5.7.1.64
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 2 826 42 1 1578918 5 65 1 5 7 1 64}

  • {iso(1) member-body(2) gb(826) 42 1 1578918 5 65 bgpMib(1) bgpPib(5) bgpPeergrTable(7) bgpPeergrEntry(1) bgpPeergrAddrSourceType(64)}
  • {iso(1) memberBody(2) gb(826) 42 1 1578918 5 65 bgpMib(1) bgpPib(5) bgpPeergrTable(7) bgpPeergrEntry(1) bgpPeergrAddrSourceType(64)}
OID-IRI notation
  • /1/2/826/42/1/1578918/5/65/1/5/7/1/64
  • /ISO/Member-Body/GB/42/1/1578918/5/65/1/5/7/1/64
  • /ISO/Member-Body/826/42/1/1578918/5/65/1/5/7/1/64
  • /ISO/2/826/42/1/1578918/5/65/1/5/7/1/64
Named path variants
  • /iso/member-body/gb/42/1/1578918/5/65/bgpMib/bgpPib/bgpPeergrTable/bgpPeergrEntry/bgpPeergrAddrSourceType
  • /iso/memberBody/gb/42/1/1578918/5/65/bgpMib/bgpPib/bgpPeergrTable/bgpPeergrEntry/bgpPeergrAddrSourceType

SNMP properties

Value type
InetAddressType
Maximum access defined by MIB
read-create
Status in MIB
current
Default value
unknown

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

bgpPeergrAddrSourceType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The address type of the bgpPeergrAddrSource field.  Setting
                this field to the default value means that bgpPeergrAddrSource
                is unspecified.

                This field is ignored for peers identified only by
                interface (bgpPeerLocalAddr and bgpPeerRemoteAddr are both
                zero).

                An AMB_INETWK_ADDR_TYPE_IPV6 must always be global.

                This field can be changed at any time.  However, if a peer
                is configured to use the peer group field and the field is
                changed while the peer is row_status ACTIVE, the change
                will only take effect after the peer has been cycled
                row_status NOT_IN_SERVICE and then ACTIVE, thus forcing
                the peer session to be recreated.  In this case, until the
                peer is set row_status NOT_IN_SERVICE, the peer will be
                marked as out of date (as reported by the config_state
                field in the AMB_BGP_PEER_STATUS row for the peer)."
    DEFVAL       { unknown }
    ::= {bgpPeergrEntry 64 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The address type of the bgpPeergrAddrSource field. Setting this field to the default value means that bgpPeergrAddrSource is unspecified. This field is ignored for peers identified only by interface (bgpPeerLocalAddr and bgpPeerRemoteAddr are both zero). An AMB_INETWK_ADDR_TYPE_IPV6 must always be global. This field can be changed at any time. However, if a peer is configured to use the peer group field and the field is changed while the peer is row_status ACTIVE, the change will only take effect after the peer has been cycled row_status NOT_IN_SERVICE and then ACTIVE, thus forcing the peer session to be recreated. In this case, until the peer is set row_status NOT_IN_SERVICE, the peer will be marked as out of date (as reported by the config_state field in the AMB_BGP_PEER_STATUS row for the peer).

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

bgpPeergrAddrSourceType · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: bgpPeergrAddrSourceType

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "bgpPeergrAddrSourceType",
    "OBJECT-TYPE",
    "SYNTAX",
    "InetAddressType",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The address type of the bgpPeergrAddrSource field. Setting this field to the default value means that bgpPeergrAddrSource is unspecified. This field is ignored for peers identified only by interface (bgpPeerLocalAddr and bgpPeerRemoteAddr are both zero). An AMB_INETWK_ADDR_TYPE_IPV6 must always be global. This field can be changed at any time. However, if a peer is configured to use the peer group field and the field is changed while the peer is row_status ACTIVE, the change will only take effect after the peer has been cycled row_status NOT_IN_SERVICE and then ACTIVE, thus forcing the peer session to be recreated. In this case, until the peer is set row_status NOT_IN_SERVICE, the peer will be marked as out of date (as reported by the config_state field in the AMB_BGP_PEER_STATUS row for the peer).\"",
    "DEFVAL",
    "{",
    "unknown",
    "}",
    "::=",
    "{",
    "bgpPeergrEntry",
    "64",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "InetAddressType"
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The address type of the bgpPeergrAddrSource field. Setting this field to the default value means that bgpPeergrAddrSource is unspecified. This field is ignored for peers identified only by interface (bgpPeerLocalAddr and bgpPeerRemoteAddr are both zero). An AMB_INETWK_ADDR_TYPE_IPV6 must always be global. This field can be changed at any time. However, if a peer is configured to use the peer group field and the field is changed while the peer is row_status ACTIVE, the change will only take effect after the peer has been cycled row_status NOT_IN_SERVICE and then ACTIVE, thus forcing the peer session to be recreated. In this case, until the peer is set row_status NOT_IN_SERVICE, the peer will be marked as out of date (as reported by the config_state field in the AMB_BGP_PEER_STATUS row for the peer)."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "unknown"
    ]
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.2.826)

The UK Name Registration Authority

Current Registration Authority (inferred from ancestor 1.2.826)

Mark Barratt or Vanessa Tatler

Siblings (69)

OIDNameDirect childrenDescendantsDescription
1.2.826.42.1.1578918.5.65.1.5.7.1.52 bgpPeergrDistListAclIn00
1.2.826.42.1.1578918.5.65.1.5.7.1.53 bgpPeergrDistListAclOut00
1.2.826.42.1.1578918.5.65.1.5.7.1.54 bgpPeergrDistListPlIn00
1.2.826.42.1.1578918.5.65.1.5.7.1.55 bgpPeergrDistListPlOut00
1.2.826.42.1.1578918.5.65.1.5.7.1.56 bgpPeergrFilterListIn00
1.2.826.42.1.1578918.5.65.1.5.7.1.57 bgpPeergrFilterListOut00
1.2.826.42.1.1578918.5.65.1.5.7.1.58 bgpPeergrAddrSourceIf00
1.2.826.42.1.1578918.5.65.1.5.7.1.59 bgpPeergrUseImportLocalPref00
1.2.826.42.1.1578918.5.65.1.5.7.1.60 bgpPeergrImportLocalPref00
1.2.826.42.1.1578918.5.65.1.5.7.1.61 bgpPeergrUseExportLocalPref00
1.2.826.42.1.1578918.5.65.1.5.7.1.62 bgpPeergrExportLocalPref00
1.2.826.42.1.1578918.5.65.1.5.7.1.63 bgpPeergrSlowPeer00
1.2.826.42.1.1578918.5.65.1.5.7.1.65 bgpPeergrAddrSource00
1.2.826.42.1.1578918.5.65.1.5.7.1.66 bgpPeergrMaxPrfxClear00
1.2.826.42.1.1578918.5.65.1.5.7.1.67 bgpPeergrPrfxThresholdClear00
1.2.826.42.1.1578918.5.65.1.5.7.1.68 bgpPeergrTtlSecurityMinTtl00
1.2.826.42.1.1578918.5.65.1.5.7.1.69 bgpPeergrRemovePrivateAs00
1.2.826.42.1.1578918.5.65.1.5.7.1.70 bgpPeergrResetPeerOnCfgChange00
1.2.826.42.1.1578918.5.65.1.5.7.1.71 bgpPeergrAdminStatus00